Research on the influence of workpiece orientation during processing in disc centrifugal machine on the geometrical structure of its surface and processing efficiency

• Autorzy: Plichta Jarosław , Juniewicz Mateusz

Identyfikatory

DOI

10.30464/jmee.2020.4.3.221

• Języki publikacji: EN

Abstrakty

EN

The article describes the result of experiments which were intended to compare the results of different workpieces orientation in disc centrifugal machine. During experimental investigations, particular attention was paid to the optimal orientation the workpiece inworking charge. The results of the research presented in this article confirm the benefit of horizontal orientation of the workpiece to the motion of the media in the working charge

Słowa kluczowe

EN

disc centrifugal machine; geometrical structure

PL

wirówka tarczowa; struktura geometryczna

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2020
• Tom: Vol. 4, No 3
• Strony: 221--226
• Opis fizyczny: Bibliogr. 4 poz., rys., tab., wykr.

Twórcy

autor

Plichta Jarosław

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Raclawicka 15-17, 75-620 Koszalin, Poland

autor

Juniewicz Mateusz

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Raclawicka 15-17, 75-620 Koszalin, Poland

Bibliografia

• 1. Sutowski P., Plichta J., Kałduński P.: Determining kinetic energy distribution of the working medium in a centrifugal disc finishing process-part 1: theoretical analis. The International Journal of Advanced Manufacturing Technology 2019.
• 2. Sutowski P., Plichta J., Kałduński P.: Determining kinetic energy distribution of the working medium in a centrifugal disc finishing process-part 2: experimental analysis with the use of acoustic emission signal. The International Journal of Advanced Manufacturing Technology 2019.
• 3. Srivastav S. et al.: Effect of Workpiece Orientation, Lubrication and Media Geometry on the Effectiveness of Vibratory Finishing of Al6061 MATE Web of Conferences 30.04001 (2015).
• 4. Vijayaraghavan V. et al.: State-of-the-art in experimental and numerical modeling of surface characterization of components in mass finishing process. International Journal Advanced Manufacturing Technology.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).