Comparison of the Stress Relaxation of Biodegradable Surgical Threads Made of Mg and Zn Alloys and Some Commercial Synthetic Materials

• Autorzy: Milenin A. , Kustra P. , Wróbel M. , Paćko M. , Byrska-Wójcik D.

Identyfikatory

DOI

10.24425/amm.2019.129506

• Języki publikacji: EN

Abstrakty

EN

The mechanical properties of the commercial synthetic surgical threads (i.e., monofilament Monosyn^R and polyfilament Polysorb^TM) and threads made of pure zinc and selected magnesium alloys were compared. Tensile and relaxation tests of fine fibers/wires without and with a surgical knot were performed on a Zwick 250 tensile machine and on the specially constructed tensile machine dedicated for ultra-thin samples. An about 50% decrease in the maximum tensile load was registered for both synthetic and Mg-based threads due to the presence of a surgical knot while only an about 10% decrease was documented for the zinc threads.

Słowa kluczowe

EN

Ax30; Zn; surgical threads; relaxation; mechanical properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 3
• Strony: 1139--1143
• Opis fizyczny: Bibliogr. 14 poz., fot., rys., tab.

Twórcy

autor

Milenin A.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Kustra P.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Wróbel M.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Paćko M.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Byrska-Wójcik D.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] P. A. Gunatillake, R. Adhikari, Eur. Cells Mater. 5, 1 (2003).
• [2] G. O. Hofmann, Arch. Orthop. Trauma Surg. 114 (3), 123 (1995).
• [3] W. Cheng, D. E. Cameron, K. E. Warden, J. D. Fonger, V. L. Gott, Ann. Thorac. Surg. 55 (3), 737 (1993).
• [4] J. M. Seitz, R. Eifler, F. W. Bach, H. J. Maier, J. Biomed. Mater. Res. A 102 (10), 3744 (2014).
• [5] S. Zhao, J.-M. Seitz, R. Eifler, H. J. Maier, R. J. Guillory II, E. J. Earley, A. Drelich, J. Goldman, J. W. Drelich, Mater. Sci. Eng. C 76, 301 (2017).
• [6] A. Milenin, P. Kustra, D. Byrska-Wójcik, O. Grydin, M. Schaper, T. Mentlein, G. Gerstein, F. Nurberger, JOM,68 (12), 3063 (2016).
• [7] PolysorbTM absorbable sutures, Reference Guide, 2017 Medtronic, 17-emea-wc-guide-polysorb-en 1587715
• [8] PolysorbTM, Braided, Synthetic Absorbable Suture, COVIDEN, M110416 GB-07/2012
• [9] MonosynR, The surgeon’s choise, B-Braun, Sharing Expertise, Brochure no B20402-0112/1/1
• [10] MonosynR, Mild Term Absorbable Monofilament Suture, Aesculap, Inc. - a B. Braun Co, DOC 1218 Rev A 2M 4/15
• [11] F. Porter, Zinc Handbook: Properties, processing, and use in design, Marcel Dekker, New York, NY, 1991.
• [12] A. Milenin, J. M. Seitz, J. M., F., W. Bach, D. Bormann, P. Kustra, Wire Journal International6, 74 (2011).
• [14] A. Milenin, M. Gzyl, T. Rec, B. Płonka, Arch. Metall. Mater. 59(2), 561 (2014).
• [15] P. Kustra, A. Milenin, D. Byrska-Wójcik, O. Grydin, M. Schaper, J. Mater. Process. Tech. 247, 234 (2017)

Uwagi

EN

1. Investigetion are conducted within project no. POIR.04.01.04-00-0074/17 named: "Comprehensive development and preparation for the implementation of innovative implant solutions in the treatment of animals, surgical instruments for their implantology and biodegradable surgical thread for veterinary medicine” Action 4.1 "Research and Development”, Subaction 4.1.4 "Application projects” Operational Program Smart Growth 2014-2020 co-financed from the European Regional Development Fund.

PL

2. Błędna numeracja bibliografii (brak poz. 13).

PL

3. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).