Microstructure and positron lifetimes of zirconium modified aluminide coatings

Romanowska, J.; Dryzek, E.; Morgiel, J.; Siemek, K.; Kolek, Ł.; Zagula-Yavorska, M.

doi:10.1016/j.acme.2018.03.002

Artykuł - szczegóły

Tytuł artykułu

Microstructure and positron lifetimes of zirconium modified aluminide coatings

Autorzy

Romanowska J. , Dryzek E. , Morgiel J. , Siemek K. , Kolek Ł. , Zagula-Yavorska M.

Wybrane pełne teksty z tego czasopisma

http://www.springer.com/journal/43452

Identyfikatory

DOI

10.1016/j.acme.2018.03.002

Warianty tytułu

Języki publikacji

Abstrakty

The microstructure of the zirconium modified and non-modified aluminide coatings was examined by the EDS, XRD, TEM and the positron annihilation spectroscopy methods. Both coatings have a double layer structure: β-NiAl phase on the top and γ′-Ni3Al below. Small zirconium nanoparticles were found along grain boundaries in the β-NiAl phase. The positron lifetime in both coatings is the same. The formation of zirconium precipitates neither affects, the number of defects nor the volume diffusion. Zirconium nanoparticles that precipitate along grain boundaries stand against the outward diffusion of Al ions through the coating to the coating/oxygen interface. This “blocking effect” may be responsible for the reduction of the alumina scale growth rate and may delay pore formation on the coating/oxygen interface.

Słowa kluczowe

aluminide coatings zirconium positron annihilation spectroscopy TEM analysis

powłoka glinkowa cyrkon anihilacja pozytonów

Wydawca

Springer
Wrocław University of Science and Technology

Czasopismo

Archives of Civil and Mechanical Engineering

Rocznik

2018

Tom

Vol. 18, no. 4

Strony

1150--1155

Opis fizyczny

Bibliogr. 34 poz., rys., tab., wykr.

Twórcy

autor

Romanowska J.

jroman@prz.edu.pl

Faculty of Mechanical Engineering and Aeronautics, Department of Materials Science, Rzeszów University of Technology, 2 W Pola Street, 35-959 Rzeszow, Poland

autor

Dryzek E.

Institute of Nuclear Physics, Polish Academy of Sciences, 152 Radzikowskiego Street, Kraków, Poland

autor

Morgiel J.

Institute of Metallurgy and Materials Sciences, PAS, 25 Reymonta Street, 30-059 Kraków, Poland

autor

Siemek K.

Institute of Nuclear Physics, Polish Academy of Sciences, 152 Radzikowskiego Street, Kraków, Poland

autor

Kolek Ł.

Faculty of Mechanical Engineering and Aeronautics, Department of Materials Science, Rzeszów University of Technology, 2 W Pola Street, 35-959 Rzeszow, Poland

autor

Zagula-Yavorska M.

Faculty of Mechanical Engineering and Aeronautics, Department of Materials Science, Rzeszów University of Technology, 2 W Pola Street, 35-959 Rzeszow, Poland

Bibliografia

[1] A. Haynes, Y. Zhang, M.K. Cooley, L. Walker, K.S. Reeves, B.A. Pint, Surf. Coat. Technol. 189 (2004) 153–157.
[2] M. Zagula-Yavorska, J. Sieniawski, T. Gancarczyk, Arch. Metall. Mater. 57 (2012) 503–509.
[3] M. Zagula-Yavorska, J. Sieniawski, J. Mater. Eng. Perform. 23 (2014) 918–926.
[4] J.A. Haynes, K.L. More, B.A. Pint, I.G. Wright, K. Cooley, Y. Zhang, High Temperature Corrosion and Protection of Materials, 5, 2000, pp. 35–42.
[5] M. Zagula-Yavorska, M. Pytel, J. Romanowska, J. Sieniawski, J. Mater. Eng. Perform. 24 (2015) 1614–1625.
[6] Y. Wang, M. Suneson, G. Sayre, Surf. Coat. Technol. 15 (2011) 1218–1228.
[7] B.M. Warnes, Surf. Coat. Technol. 146 (2001) 7–14.
[8] G.Y. Kim, L.M. He, J.D. Meyer, A. Quintero, J.A. Haynes, W.Y. Lee, Metall. Mater. Trans. A 35 (2004) 3581–3588.
[9] J.A. Nesbitt, B. Nagaraj, J. Williams, Sci. Technol. 4 (2001) 78–92.
[10] B. Ning, M. Shamsuzzoha, M.L. Weaver, Surf. Coat. Technol. 200 (2005) 1270–1275.
[11] D. Li, H. Guo, D. Wang, T. Zhang, S. Gong, X. Hubin, Corros. Sci. 66 (2013) 125–135.
[12] B.A. Nagaraj, J.L. Williams, U.S. Patent 2003;6602356.
[13] S. Hamadi, M. Bacos, M. Poulain, A. Seyeux, V. Maurice, P. Marcus, Surf. Coat. Technol. 204 (2009) 756–760.
[14] H.B. Guo, D. Wang, H. Peng, S. Gong, H. Xu, Corros. Sci. 78 (2014) 369–377.
[15] H. Guo, T. Zhang, S. Wang, S. Gong, Corros. Sci. 53 (2011) 2228–2232.
[16] B.A. Pint, J.A. Haynes, T.M. Besman, Surf. Coat. Technol. 205 (2010) 3273–3287.
[17] A.H. Heuerw, D.B. Hovis, J.L. Smiałek, B.J. Gleson, Am. Ceram. Soc 94 (2011) 146–153.
[18] S. Hamadi, M. Bacos, M. Poulain, S. Zanna, V. Maurice, P. Marcus, Mater. Sci. Forum 595–598 (2008) 95–100.
[19] H. Guo, D. Li, L. Zheng, S. Gong, H. Xu, Corros. Sci. 85 (2014) 289–295.
[20] M.J. Puska, R.M. Nieminen, Rev. Mod. Phys. 66 (1994) 841–848.
[21] S. McGuire, D.J. Keeble, J. Appl. Phys. 100 (2006) 103504–103509.
[22] J. De Baerdemaeker, J. Colaux, G. Terwagne, C. Dauwe, Radiat. Phys. Chem. 68 (2003) 605–613.
[23] J. Romanowska, M. Zagula-Yavorska, J. Sieniawski, Open J. Metal 3 (2013) 50–54.
[24] J. Kansy, Nucl. Instr. Methods A 374 (1996) 235–244.
[25] NORAN System SIX Models 200 and 300 User's Handbook, Thermo Electron Corporation, USA, 2005.
[26] Z. Bojarski, E. Łągiewka, Rentgenowska analiza strukturalna, PWN, Warszawa, 1988.
[27] M. Zagula-Yavorska, J. Morgiel, J. Romanowska, J. Sieniawski, Nanoparticles in zirconium-doped aluminide coatings, Mater. Lett. 139 (2015) 50–54.
[28] J. Romanowska, M. Zagula-Yavorska, J. Sieniawski, Bull. Mater. Sci. 36 (2013) 1043–1048.
[29] T.B. Massalski, American Society for Metals, Metal Park, 1986. p. 140.
[30] W. Puff, B. Logar, A.G. Balogh, Acta Mater. 47 (1999) 101–109.
[31] M. Kogachi, S. Minamigawa, Y. Shirai, M. Yamaguchi, Scr. Mater. 34 (1996) 243–249.
[32] K.G. Lynn, J. Snead, J.J. Hurst, Phys. F: Metal Phys. 10 (1980) 1735–1741.
[33] A.J. Bradley, A. Taylor, Proc. R. Soc. A 159 (1937) 56–63.
[34] K. Badura-Gergen, H.E. Schaefer, Phys. Rev. B 56 (1997) 3032–3037.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019)

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-9e85d703-6cf4-4998-b891-0f1cb8837961