Development of technologies for manufacturing medical implants using CNC machines and microplasma spraying of biocompatible coatings

• Autorzy: Alontseva Dayra , Azamatov Bagdat , Voinarovych Sergii , Kyslytsia Oleksandr , Koltunowicz Tomasz N. , Toxanbayeva Aigerim

Identyfikatory

DOI

10.15199/48.2020.04.32

Warianty tytułu

PL

Rozwój technologii wytwarzania implantów medycznych z wykorzystaniem maszyn CNC i rozpylania mikroplazmowego powłok biokompatybilnych

• Języki publikacji: EN

Abstrakty

EN

The paper describes the main technological approaches for manufacturing medical implants from titanium alloy using Computer Numerical Control (CNC) machines and microplasma spraying of hydroxyapatite (HA) coatings. New approaches to the formation of coatings with the desired structure and properties and the challenges of developing the technologies for producing modified implants are discussed.

PL

W artykule opisano główne podejścia technologiczne do wytwarzania implantów medycznych ze stopu tytanu przy użyciu maszyn CNC do sterowania numerycznego i mikroplazmowego natryskiwania powłok hydroksyapatytowych (HA). Omówiono nowe podejścia do tworzenia powłok o pożądanej strukturze i właściwościach oraz wyzwania związane z opracowaniem technologii wytwarzania zmodyfikowanych implantów.

Słowa kluczowe

EN

CNC machine; microplasma spraying; hydroxyapatite coating; medical implant

PL

maszyna CNC; natryskiwanie mikroplazmowe; powłoka hydroksyapatytowa; implant medyczny

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2020
• Tom: R. 96, nr 4
• Strony: 154--157
• Opis fizyczny: Bibliogr. 16 poz., rys., tab.

Twórcy

autor

Alontseva Dayra

• D. Serikbayev East Kazakhstan State Technical University, 69, Protozanov Street, 070004 Ust-Kamenogorsk, Kazakhstan

autor

Azamatov Bagdat

• D. Serikbayev East Kazakhstan State Technical University, 69, Protozanov Street, 070004 Ust-Kamenogorsk, Kazakhstan

autor

Voinarovych Sergii

• E.O. Paton Electric Welding Institute, 11 Bozhenko Street, 03680, Kiev, Ukraine

autor

Kyslytsia Oleksandr

• E.O. Paton Electric Welding Institute, 11 Bozhenko Street, 03680, Kiev, Ukraine

autor

Koltunowicz Tomasz N.

• Lublin University of Technology, 38D Nadbystrzycka Street, 20-618, Lublin, Poland

autor

Toxanbayeva Aigerim

• Department of Engineering Physics, K. Satpayev Kazakh National Research Technical University, 22 Satpayev Street, Almaty, 050013, Kazakhstan

Bibliografia

• [1] Tobin E.J., Recent coating developments for combination devices in orthopedic and dental applications. A literature review. Advanced Drug Delivery Reviews 112 (2017), 88-100
• [2] Abdul Rani A.M., Fua-Nizan R., Yazid Din M., Abdu Aliyu A.A., Manufacturing Methods for Medical Prostheses - A Review. International Medical Device and Technology Conference (2017), 138-142
• [3] Shuib S., Nur A., Sulaiman S., Sahari B.B., Manufacturing methods of implant for use in orthopedic applications: Hip prosthesis. A Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3ARC) 2007
• [4] Moayedfar M., Abdul Rani A.M., Emamiana S., Haghighizadeh A., Jafari N., Manufacture of medical orthopaedic implants using computed tomography imaging and rapid prototyping, ARPN Journal of Engineering and Applied Sciences 11 n.1, (2016), 177-180
• [5] Matassi F., Botti A., Sirleo L., Carulli C., Innocenti M., Porous metal for orthopedics implants, Clin Cases Miner Bone Metab, 10 n.2, (2013), 111-115.
• [6] Karachalios T., (Ed.), Bone-Implant Interface in Orthopedic Surgery. Basic Science to Clinical Applications, Springer, London (2014)
• [7] Jing W., Zhang M., Jin L., Zhao J., Gao Q., Ren M. , Fan Q., Assessment of osteoinduction using a porous hydroxyapatite coating prepared by micro-arc oxidation on a new titanium alloy, International Journal of Surgery 24 Part A, (2015), 51-56
• [8] Goodman S.B., Yao Z., Keeney M., Yang F., The future of biologic coatings for orthopaedic implants, Biomaterials 34 n.13, (2013), 3159-3534
• [9] Vahabzadeh S., Roy M., Bandyopadhyay A., Bose S., Phase stability and biological property evaluation of plasma sprayed hydroxyapatite coatings for orthopedic and dental applications. Acta Biomaterialia 17 (2015), 47-55
• [10] Dorozhkin S.V., Calcium orthophosphate deposits: Preparation, properties and biomedical applications, Materials Science and Engineering: C 55 (2015), 272-326
• [11] Implants for Surgery- Hydroxyapatite. Part 2: Coatings of Hydroxyapatite. International Organisation for Standards. BS ISO 13779-2:2000, 2000
• [12] Alontseva D.L., Borisov Yu. S., Voinarovych S.G., Kyslytsia O.N., Kolesnikova T.A., Prokhorenkova N.V., Kadyroldina A. T . , Development of technology of microplasma spraying for the application of biocompatible coatings in the manufacture of medical implants. Przeglad Elektrotechniczny 94 n.7, (2018), 94-97
• [13] ISO 13179-1:2014 Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants. Part 1: General requirements. ICS: 11.040.40 Implants for surgery, prosthetics and orthotics
• [14] Bor isov Iu.S., Voinarovich S.G., Fomakіn O.O., Iushchenko K.A., Decl. Pat. UA V23K10/00 Plazmotron dlia napilennia pokrittіv, (Ukraina (UA); no 2002076032; Zaiavl.19.07.2002r. Opubl. 16.06.2003, Bul. no 6
• [15] ASTM E2109-01 (2014) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings, ASTM International, West Conshohocken, PA, 2014
• [16] ISO 4287:1997 (2015) Geometrical Product Specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).