Characteristics of the Growth of the Directionally Solidified Fe-4.25% C Eutectic Alloy

• Autorzy: Trepczyńska-Łent Małgorzata

Identyfikatory

DOI

10.24425/ams.2021.138601

• Języki publikacji: EN

Abstrakty

EN

The current work is dedicated to the mathematical description of a protrusion of the leading phase (cementite) over the wetting phase (austenite) observed during the author’s experiments in previous articles. A cementite protrusion is confirmed in the directionally solidified Fe-4.25% C eutectic alloy. The protrusion is defined due to the mass balance fulfilment. A coordinate system is attached to the solid/liquid interface, which is moving with the constant growth rate v.

Słowa kluczowe

EN

Fe-C eutectic alloy; directional solidification; protrusion of leading phase

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 4
• Strony: 1179--1186
• Opis fizyczny: Bibliogr. 21 poz., rys., tab., wzory

Twórcy

autor

Trepczyńska-Łent Małgorzata

• UTP University of Science and Technology, Mechanical Engineering Faculty, Bydgoszcz, Poland

• https://orcid.org/0000-0002-1609-6858

Bibliografia

• [1] E. Cadirli, H. Kaya, M. Gunduz, Materials Research Bulletin 38, 1457-1476 (2003).
• [2] G.J. Davies, Solidification and casting, Wiley (1973).
• [3] V.L. Davies, Journal of the Institute of Metals 93, 10-14 (1964-65).
• [4] M. Hillert, V.V. Subba Rao, Iron and Steel Intitute Publication 110, 204-212 (1968).
• [5] D.M. Stefanescu, Eutectic solidification, Science and Engineering of Casting Solidification, Springer 207 (2015).
• [6] E. Fraś, Krystalizacja metali, Wydawnictwo Naukowo Techniczne, Warszawa (2003).
• [7] M. Trepczyńska-Łent, Archives of Foundry Engineering 13 (3), 101-106 (2013).
• [8] M. Trepczyńska-Łent, Archives of Metallurgy and Materials 58 (3), 987-991. (2013). DOI: https://doi.org/10.2478/amm-2013-0116
• [9] M. Trepczyńska-Łent, Archives of Foundry Engineering 16 (4), 169-174 (2016). DOI: https://doi.org/10.1515/afe-2016-0104
• [10] M. Trepczyńska-Łent, Archives of Metallurgy and Materials 62 (1), 365-368 (2017). DOI: https://doi.org/10.1515/amm-2017-0056
• [11] M. Trepczyńska-Łent, Crystal Research and Technology 52 (7), 1600359 (2017). DOI: https://doi.org/10.1002/crat.201600359
• [12] M. Trepczyńska-Łent, Archives of Foundry Engineering 19 (4), 113-116 (2019).
• [13] E. Guzik, A model of irregular eutectic growth taking as an example the graphite eutectic in Fe-C alloys. Dissertations Monographies 15, AGH Kraków (1994).
• [14] P. Magnin, W. Kurz, Acta Metall. 35, 1119 (1987).
• [15] J.D. Hunt., K.A. Jackson, Trans Metall. Soc. AIME 236, 843-852 (1966).
• [16] K.A. Jackson, J.D. Hunt, Transactions of the Metallurgical Society of AIME 236, 1129-1142 (1966).
• [17] W. Wołczyński, Defect and Diffusion Forum 272, 123-138 (2007).
• [18] W. Wołczyński, Archives of Metallurgy and Materials 63 (1), 65-72 (2018).
• [19] G.A. Chadwick, Eutectic Alloy Solidification, Chapter 2 in: Progress in Materials Science. Pergamon Press, Headington Hill Hall, Oxford (1964).
• [20] W. Wołczyński, Crystal Research and Technology 25 (1), 1303-1309 (1990).
• [21] W. Wołczyński, Archives of Metallurgy and Materials 65 (2), 653-666 (2020). DOI: https://doi.org/10.24425/amm.2020.132804

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).