Numerical analysis of temperature and air stream velocity distributions in the cross-sections through a room with a book collection

• Autorzy: Cichowicz R. , Lewandowska A.
• Języki publikacji: EN

Abstrakty

EN

The aim of the study was to analyze selected parameters of air in a room with a book collection taking into account the influence of components of mechanical ventilation on air flow, temperature and velocity distributions. The values of air parameters, obtained by numerical calculations in DesignBuilder, were compared with the recommended ranges. The temperature and air velocity in the cross-sections through the part of the room with the book resources were referred to the prescriptions and standards relating to the conditions in libraries. The parameters of air in the space for permanent stay of employees were compared with the guidelines corresponding to the conditions of thermal comfort.

Słowa kluczowe

EN

CFD modelling; air parameters; conditions in library; thermal comfort

PL

modelowanie CFD; parametry powietrza; warunki w bibliotece; komfort cieplny

• Wydawca: Centrum Badań i Innowacji Pro-Akademia ; Ukrainian Academy of Sciences - Research and Development Centre for Industrial Problems of Development
• Czasopismo: Acta Innovations
• Rocznik: 2017
• Tom: no. 25
• Strony: 21--28
• Opis fizyczny: Bibliogr. 27 poz., wykr.

Twórcy

autor

Cichowicz R.

• Department of Environmental Engineering and Building Construction Installations, Faculty of Architecture, Civil and Environmental Engineering, Lodz University of Technology, al. Politechniki 6, 90-924 Lodz, Poland
• [e-mail]

autor

Lewandowska A.

• Department of Environmental Engineering and Building Construction Installations, Faculty of Architecture, Civil and Environmental Engineering, Lodz University of Technology, al. Politechniki 6, 90-924 Lodz, Poland

Bibliografia

• [1] PN-ISO 11799:2006, Information and documentation. Document storage requirements for archive and library materials (Informacja i dokumentacja. Wymagania dotyczące warunków przechowywania materiałów archiwalnych i bibliotecznych).
• [2] Y. H. Yau, N. N. N. Ghazali, A. Badarudin, F. C. Goh, The CFD Simulation on Thermal Comfort in a library Building in the Tropics, AIP Conference Proceedings 1233, 1529 (2010) 1529-1534. http://dx.doi.org/10.1063/1.3452135
• [3] D. Iatauro, G. Fasano, E. Marinelli and M. Zinzi, Thermal comfort analysis in a historical building library in Florence, Italy: a case study, Conference: Healthy Buildings, Syracuse NY USA 2009. https://www.researchgate.net/publication/280096139_Thermal_comfort_analysis_in_a_historical_building_library_in_Florence_Italy_a_case_study
• [4] D. Milone, A. Galatioto, G. Lacca, S. Pitruzzella, Thermo-hygrometric comfort in the lecture hall of a library: methodology and experimental evidence, Science Series Data Report 4 (7) (2012) 86 – 92.
• [5] T. Godish, Indoor Environmental Quality, Lewis Publishers, New York 2000.
• [6] N. Lushington, W. Rudorf, L. Wong, Libaries: A design manual, Birkhauser 2016.
• [7] A. Kuberka, W. Daszewski, M. Chyrczakowska, S. Jaraczewski, Air-condition system design for libraries and archives in the light of restorer practice (Wskazówki do projektu klimatyzacji dla bibliotek i archiwów w świetle praktyki konserwatorskiej), Instal 7-8 (2012) 11-16.
• [8] Z. Kabza, K. Kostyrko, Metrology of room microclimate and environmental physical quantities. Part 2 (Metrologia mikroklimatu pomieszczenia i środowiskowych wielkości fizycznych. Część 2), Publishing House of Opole University of Technology (Oficyna Wydawnicza Politechniki Opolskiej), Opole, 2004.
• [9] ISO 11799:2015, Information and documentation - Document storage requirements for archive and library materials.
• [10] PN-EN ISO 7730:2006, Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
• [11] P. O. Fanger, Thermal comfort (Komfort Cieplny), Arkady, Warsaw, 1974.
• [12] Z. Kabza, K. Kostyrko, S. Zator, A. Łobzowski, W. Szkolnikowski, Adjustment of the microclimate of the room (Regulacja mikroklimatu pomieszczenia), PAK Publishing House (Agenda Wydawnicza PAK-u), Warsaw, 2005.
• [13] D. Niekrawiec, Thermal comfort as satisfying factor in a concert hall (Komfort cieplny jako stan gwarantujący zadowolenie z warunków termicznych w danym pomieszczeniu audytoryjnym), District Heating, Heating, Ventilation (Ciepłownictwo, Ogrzewnictwo, Wentylacja) 1 (2008) 10-14.
• [14] Z. Orzechowski, J. Prywer, R. Zarzycki, Fluid mechanics in engineering and environment protection (Mechanika płynów w inżynierii i ochronie środowiska), Scientific and Technical Publishing House (Wydawnictwo Naukowo – Techniczne), Warsaw, 2009.
• [15] R. Cichowicz, H. Sabiniak, G. Wielgosiński, The influence of a ventilation on the level of carbon dioxide in a classroom at a higher university, ECOL CHEM ENG S. 22 (1) (2015) 61-71.
• [16] R. Cichowicz, G. Wielgosiński, A. Targaszewska, Analysis of CO2 concentration distribution inside and outside small boiler plants, ECOL CHEM ENG S. 23(1) (2016) 49-60.
• [17] A. Chojnacka, I. Sudoł – Szopińska, Thermal comfort in office areas in the aspect of standards (Komfort termiczny w pomieszczeniach biurowych w aspekcie norm), Occupational Safety (Bezpieczeństwo pracy) 6 (2007) 16-19.
• [18] International Society of Indoor Air Quality and Climate – CIB Task Group TG42, Performance Criteria of Buildings for Health and Comfort, CIB number 292, 2004.
• [19] B. Lipska, A. Palmowska, P. Ciuman, P. Koper, Numerical modelling CFD in the research and design of air distribution in ventilated rooms (Modelowanie numeryczne CFD w badaniach i projektowaniu rozdziału powietrza w pomieszczeniach wentylowanych), Instal 3 (2015) 33-43.
• [20] J. H. Ferziger, M. Perić, Computational Method for Fluid Dynamics, Springer – Verlag, Berlin, 1996.
• [21] https://www.designbuilder.co.uk
• [22] DesignBuilder 2.1 User’s Manual. http://www.designbuildersoftware.com/docs/designbuilder/DesignBuilder_2.1_Users-Manual_Ltr.pdf
• [23] http://www.lsi-lastem.it/webdocument/instum_00064_en.pdf
• [24] Ahmed A., Gao S., Kareem A. K., Energy saving and indoor thermal comfort evaluation using a novel local exhaust ventilation system for office rooms, Applied Thermal Engineering (110) 2017; 821–834, https://doi.org/10.1016/j.applthermaleng.2016.08.217
• [25] E. Jankowska, D. Kondej, M. Pośniak, Subjective evaluation of the work environment quality in offices (Subiektywna ocena jakości środowiska pracy w pomieszczeniach biurowych), Occupational Hygiene (Medycyna Pracy) 54 (5) (2003) 437 - 444.
• [26] M. Taheri, M. Schuss, A. Fail, A. Mahdavi, Design analysis of an office ventilation system via calibrated CFD application, IBPSA Conference 2014. http://www.ibpsa.org/proceedings/bausimPapers/2014/p1112_final.pdf
• [27] O. Bamodu, L. Xia, L. Tang, A Numerical Simulation of Air Distribution in an Office Room Ventilated by 4- Way Cassette Air-conditioner, Energy Procedia 105 (2017) 2506 – 2511. https://doi.org/10.1016/j.egypro.2017.03.722

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).