Suitability of DIC and ESPI optical methods for monitoring fatigue damage development in X10CrMoVNb9-1 power engineering steel

• Autorzy: Kopec M. , Brodecki A. , Kukla D. , Kowalewski Z. L.

Identyfikatory

DOI

10.1007/s43452-021-00316-1

• Języki publikacji: EN

Abstrakty

EN

The aim of this research was to compare the effectiveness of two different optical measurement techniques (digital image correlation-DIC and electronic speckle pattern interferometry-ESPI) during fatigue damage development monitoring in X10CrMoVNb9-1 (P91) power engineering steel for pipes. The specimens machined from the as-received pipe were subjected to fatigue loadings and monitored simultaneously using DIC and ESPI techniques. It was found that DIC technique, although characterised by lower resolution, was more effective than ESPI. DIC allows to monitor the fatigue behaviour of steel specimens and accurately indicate the area of potential failure even within the initial stage of fatigue damage development.

Słowa kluczowe

EN

fatigue development; damage; P91 steel; digital image correlation (DIC); electronic speckle pattern interferometry (ESPI)

PL

zmęczenie; uszkodzenie; stal P91

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2021
• Tom: Vol. 21, no. 4
• Strony: 542--554
• Opis fizyczny: Bibliogr. 47 poz., rys., wykr.

Twórcy

autor

Kopec M.

• Institute of Fundamental Technological Research Polish Academy of Sciences, 5b Pawińskiego Str, 02-106 Warsaw, Poland
• Department of Mechanical Engineering, Imperial College London, London, UK, SW7 2AZ

• https://orcid.org/0000-0001-9565-3407

autor

Brodecki A.

• Institute of Fundamental Technological Research Polish Academy of Sciences, 5b Pawińskiego Str, 02-106 Warsaw, Poland

autor

Kukla D.

• Institute of Fundamental Technological Research Polish Academy of Sciences, 5b Pawińskiego Str, 02-106 Warsaw, Poland

autor

Kowalewski Z. L.

• Institute of Fundamental Technological Research Polish Academy of Sciences, 5b Pawińskiego Str, 02-106 Warsaw, Poland

Bibliografia

• [1] Chu TC, Ranson WF, Sutton MA, Peters WH. Application of digital-image-correlation techniques to experimental mechanics. Exp Mech. 1985;25:232–44. https://doi.org/10.1007/BF02325092.
• [2] Lord JD. Digital image correlation (dic). In: Eaton-Evans J, Dulie Barton JM, Burguete RL, editors. Modern stress and strain analysis. A state of the art guideto measurement techniques. British Society for Strain Measurement; 2009. p. 14–5.
• [3] Forster J, Theobald A, Engel S, Pasmann R. Using optical measuring system for identification of material parameters for finite element analysis. In: 11. LS-DYNA, DYNAmore GmbH, Ulm, 2012. p. 1–9.
• [4] Durif E, Réthoré J, Combescure A, Fregonese M, Chaudet P. Controllingstress intensity factors during a fatigue crack propagation using digital imagecorrelation and a load shedding procedure. Exp Mech. 2012;52:1021–31. https://doi.org/10.1007/s11340-011-9552-6.
• [5] Andersson M. The influence of notches on fatigue of heat treated sintered steel. In: International Powder Metallurgy Congress and Exhibition (2013) Euro PM2013 in Gothenburg on September 17, 2013.
• [6] Han Y, Kim DW, Kwon HJ. Application of digital image cross-correlation and smoothing function to the diagnosis of breast cancer. J Mech Behav Biomed Mater. 2012;14:7–18. https://doi.org/10.1016/j.jmbbm.2012.05.007.
• [7] Hokka M, Mirow N, Nagel H, Irqsusi M, Vogt S, Kuokkala VT. In-vivo deformation measurements of the human heart by 3D digital image correlation. J Biomech. 2015;48:2217–20. https://doi.org/10.1016/j.jbiomech.2015.03.015.
• [8] Juszczyk MM, Cristofolini L, Viceconti M. The human proximal femur behaves linearly elastic up to failure under physiological loading conditions. J Biomech. 2011;44:2259–66. https://doi.org/10.1016/j.jbiomech.2011.05.038.
• [9] Zani L, Erani P, Grassi L, Taddei F, Cristofolini L. Strain distribution in the proximal Human femur during in vitro simulated sideways fall. J Biomech. 2015;48:2130–43. https://doi.org/10.1016/j.jbiomech.2015.02.022.
• [10] Yoon S, Jung H-J, Knowles JC, Lee H-H. Digital image correlation in dental materials and related research: a review. Dental Mater. 2021;37:758–71. https://doi.org/10.1016/j.dental.2021.02.024.
• [11] Berke R, Lambros J. Ultraviolet digital image correlation(UV-DIC) for high temperature applications. Rev Sci Instrum. 2014;85:4.
• [12] Niezrecki C, Avitabile P, Warren C, Pingle P, Helfrick M. A review of digital image correlation applied to structura dynamics AIP Conference proceedings. Am Inst Phys. 2010;1253:219–32.
• [13] Lunt AJG, Korsunsky AM. A review of micro-scale focused ion beam milling and digital image correlation analysis for residua stress evaluation and error estimation. Surf and Coati Tech. 2015;283:373–88. https://doi.org/10.1016/j.surfcoat.2015.10.049.
• [14] Cunha FG, Santos TG, Xavier J. In situ monitoring of additive manufacturing using digital image correlation: a review. Materials. 2021;14:1511. https://doi.org/10.3390/ma14061511.
• [15] Pagliarulo V, Ferraro P. New applications of electronic speckle pattern interferometry in novel materials and structures. In: Proceedings SPIE 11059, Multimodal Sensing: Technologies and Applications, 1105910 (2019); https://doi.org/10.1117/12.2527997.
• [16] Ramault C, Makris A, Van Hemelrijck D, Lamkanfi E, Van Paepegem W. Comparison of different techniques for strain monitoring of a biaxially loaded cruciform specimen. Strain. 2011;47:210–7. https://doi.org/10.1111/j.1475-1305.2010.00760.x.
• [17]Rajic N, Street N, Brooks C, Galea S. Full field stress measurement for insitu structural health monitoring of airframe components, 7th European Workshop on Structural Health Monitoring. Nantes: La Cité; 2014.
• [18] Siebert T, Schubach H-R, and Splitthof K. Recent developments and applications for optical full field strain measurement using ESPI and DIC. In: Proceedings SPIE 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering, 79972B (26 May 2011); ttps://doi.org/10.1117/12.891864.
• [19] Bingleman L, Schajer GS. ESPI Measurements in the Presence of Large Lateral Displacements. In: Proulx T, editor. Application of Imaging Techniques to Mechanics of Materials and Structure, Conference Proceedings of the Society for Experimental Mechanics Series, vol. 4. New York: Springer; 2013.
• [20] Wang R, Kido M. Using ESPI system to measure high temperaturę fatigue deformation of ceramics thermally sprayed SUS304 steel. J Mater Sci. 2004;39:1389–95. https://doi.org/10.1023/B:JMSC.0000013902.30089.1f.
• [21] Kopeć M, Grzywna P, Kukla D, Kowalewski ZL. Evaluation of the fatigue damage development using ESPI method. Inżynieria Materiałowa. 2016;212:201–5. https://doi.org/10.15199/28.2016.4.9.
• [22] Ustrzycka A, Mróz Z, Kowalewski ZL, Kucharski S. Analysis of fatigue crack initiation in cyclic microplasticity regime. Int J Fat. 2020;131:105342–1–105415. https://doi.org/10.1016/j.ijfatigue.2019.105342.
• [23] Liu W, Huang J, Liu J, Wu X, Zhang K, Huang A. Experimental and crystal plasticity modelling study on the crack initiation in micro-texture regions of Ti-6Al-4V during high cycle fatigue tests. Int J Fat. 2021;148: 106203. https://doi.org/10.1016/j.ijfatigue.2021.106203.
• [24] Hunsche A, Neumann P. Quantitative measurement of persistent slip band profiles and crack initiation. Acta Metall. 1986;34:207–17. https://doi.org/10.1016/0001-6160(86)90192-6.
• [25]Song H, Liu C, Zhang H, Leen SB. A DIC-based study on fatigue damage evolution in pre-corroded aluminum alloy 2024–T4. Materials. 2018;11:2243. https://doi.org/10.3390/ma11112243.
• [26] Patriarca L, Foletti S, Beretta S. LCF and crack growth: recent results obtained by DIC. MATEC Web Conf. 2018;165:0100.https://doi.org/10.1051/matecconf/201816501001.
• [27] Gonabadi H, Oila A, Yadav A. Fatigue damage analysis of GFRP composites using digital image correlation. J Ocean Eng Mar Energy. 2021;7:25–40. https://doi.org/10.1007/s40722-020-00184-6.
• [28] Foti F, Pannier Y, Mellier D, Gigliotti M. Damage characterization during high temperature fatigue of off-axis woven organic matrix composites for aircraft applications IOP Conf Series. Mater Sci Eng. 2018;406:012055. https://doi.org/10.1088/1757-899X/406/1/012055.
• [29] Yuan F, Cheng L, Shao X, Dong Z, Zhang L, Wu G, He X. Full-field measurement and fracture and fatigue characterizations of asphalt concrete based on the SCB test and stereo-DIC. Eng Fract Mech. 2020;235: 107127. https://doi.org/10.1016/j.engfracmech.2020.107127.
• [30] Polish Standard PN10216-2 Steel tubes for pressure purposes-technical delivery conditions-Part 2: non-alloy and alloy steel tubes with specified elevated temperature properties. 2004. https://sklep.pkn.pl/pn-en-10216-2-2014-02p.html.
• [31] Ni M, Wang J, Liu J, et al. Microstructure and mechanical properties of P91 steel during heat treatment: the effect of the cooling speed during the normalization stage. J Mater Eng Perform. 2021;30:2329–40. https://doi.org/10.1007/s11665-021-05534-5.
• [32]Pandey C, Mahapatra MM, Kumar P, Saini N. Some studies on P91 steel and their weldments. J Alloys Compd. 2018;743:332–64. https://doi.org/10.1016/j.jallcom.2018.01.120.
• [33] Marakani A, Mandanala N. Electronic speckle pattern interferrometry. EML 5111L experimental stress analysis. Springer; 2016.
• [34] Bavigadda V. A new versatile electronic speckle pattern interfer-ometer for vibration measurements. Doctoral Thesis. Technological University Dublin. 2013. https://doi.org/10.21427/D7DW2N.
• [35]Tomasini EP, Revel GM, Castellini P. Laser based measurements. In: Braun S, editor. Encyclopedia of vibration. USA: Elsevier; 2001. p. 699–710.
• [36] Hedayat A, Ashur S. Digital image correlation and its application in an undergraduate civil engineering materials laboratory. US: Fort Wayne; 2015.
• [37] Zhou J-W, Liu D-H, Shao L-Y, Wang Z-L. Application of digital image correlation to measurement of packaging material mechanical properties. Math Prob Eng. 2013;2013:1–8. https://doi.org/10.1155/2013/204875.
• [38] McCormick N, Lord J. Digital image correlation. Mat Tod. 2010;13:52–4. https://doi.org/10.1016/S1369-7021(10)70235-2.
• [39] Górszczyk J, Malicki K, Zych T. Application of Digital Image Correlation (DIC) method for road material testing. Materials. 2019;12:2349. https://doi.org/10.3390/ma12152349.
• [40] Krawczyk Ł, Gołdyn M, Urban T. Digital image correlation systems in the experimental investigations: capabilities and limitations. Arch Civil Eng. 2019;65:171–80. https://doi.org/10.2478/ace-2019-0012.
• [41] Halama R, Hornacek L, Smiraus J. Combination of the ESPI and DIC techniques opens many new possibilities for surface displacement measurements. In: 55th International Conference on Experimental Stress Analysis (EAN 2017) 30 May-1 June 2017, Novy Smokovec, Slovakia.
• [42] Qvale P, Zarandi EP, Ås SK, Skallerud BH. Digital image correlation for continuous mapping of fatigue crack initiation sites on corroded surface from offshore mooring chain. Int J Fat. 2021;151: 106350. https://doi.org/10.1016/j.ijfatigue.2021.106350.
• [43] Kopec M, Kukla D, Brodecki A, Kowalewski ZL. Effect of high temperature exposure on the fatigue damage development of X10CrMoVNb9-1 steel for power plant pipes. Int J Pres Ves. 2021;189:104282–1–104316. https://doi.org/10.1016/j.ijpvp.2020.104282.
• [44] Polák J, Man J. Experimental evidence and physical models of fatigue crack initiation. Int J Fat. 2016;91(2):294–303. https://doi.org/10.1016/j.ijfatigue.2016.02.021.
• [45] Karimian SF, Modarres M, Bruck HA. A new method for detecting fatigue crack initiation in aluminum alloy using acoustic emission waveform information entropy. Eng Fract Mech. 2020;223:106771. https://doi.org/10.1016/j.engfracmech.2019.106771.
• [46] Si Y, Rouse JP, Hyde CJ. Potential difference methods for measuring crack growth: a review. Int J Fat. 2020;136: 105624. https://doi.org/10.1016/j.ijfatigue.2020.105624.
• [47] Kulkarni SS, Sun L, Moran B, et al. A probabilistic method to predict fatigue crack initiation. Int J Fract. 2006;137:9–17. https://doi.org/10.1007/s10704-005-3074-0.

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)