Parameter Characterization in Processing of Silver - Aluminum Based Electrical Contact Materials

• Autorzy: Praveen Kumar S. , Parameshwaran R. , Ananthi A. , Jenil Jaba Sam J.

Identyfikatory

DOI

10.1515/amm-2017-0287

• Języki publikacji: EN

Abstrakty

EN

An electrical contractor is one which plays significant role in day todays life in industries as well as in home appliances. In current scenario the materials for conducting purpose has an overwhelming research capability. Now a day the silver based electrical contact composite material have provided the potential applications in aerospace and automobile industries. Among silver based contact material the silver cadmium oxide and silver tin oxide plays a vital role in fabrication of electrical contactors. In this research an attempt has been made to study the influence of adding Aluminum with silver based electrical contact composite materials by two different processing routes namely stir-casting and powder metallurgy. Silver and aluminum matrix plays a virtual role in composite world owing to their highest conductivity. Optimum parameters were identified for attaining the maximum properties such as conductivity, hardness, density, and porosity of composition. By this better conducting property and mechanical property of the electrical contact can be improved by this system. Thus a screening test has be conducted with addition of Al with silver tin oxide compositions hence this paper aims to process the aluminum – silver based electrical contact materials by stir casting processing and powder metallurgy route and compare the results obtained.

Słowa kluczowe

EN

electrical contactor; silver; aluminum; tin oxide; conduction

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 3
• Strony: 1895--1901
• Opis fizyczny: Bibliogr. 11 poz., rys.

Twórcy

autor

Praveen Kumar S.

• Kongu Engineering College, Department of Mechatronics, Perundurai, Tamilnadu, India

autor

Parameshwaran R.

• Kongu Engineering College, Department of Mechatronics, Perundurai, Tamilnadu, India

autor

Ananthi A.

• Hindusthan College of Engineering, Pollachi Main Road, Coimbatore 641 032, Tamil Nadu, India

autor

Jenil Jaba Sam J.

• Kongu Engineering College, Department of Mechatronics, Perundurai, Tamilnadu, India

Bibliografia

• [1] S. K. Chung, C. R. Koch, A. F. Lynch, Flatness-based feedback control of an automotive solenoid valve, Ieee T. Contr. Syst. T. 15 (2), 394-401 (2007).
• [2] J. R. Riba, A. Garcia, J. Cusidó, M. Delgado, Dynamic model for AC and DC contactors-Simulation and experimental validation, Simul. Model Pract. Th. 19 (9), 1918-1932 (2011).
• [3] J. R. R. Ruiz, A. G. Espinosa, Design of an estimator of the kinematics of AC contactors. Int. T. Electr. Energy 19 (7), 933-948 (2009).
• [4] Z. Wróblewski, A method of gamma-beta durability determination for reliability tests of brand-new AC electromagnetic contactors, Int. T. Electr. Energy 10 (4), 219-224 (2000).
• [5] M. P. Paisios, C. G. Karagiannopoulos, P. D. Bourkas, Model for temperature estimation of dc-contactors with double-break main contacts, Simul. Model Pract. Th. 15 (5) 503-512 (2007).
• [6] L. Jiang, Z. Li, G. Fan, L. Cao, D. Zhang, The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminumcomposites with a homogenous CNT distribution, Carbon 50 (5), 1993-1998 (2012).
• [7] K. Liang, T. Y. Cheang, T. Wen, X. Xie, X. Zhou, Z. W. Zhao, C. C. Shen, N. Jiang, A. W. Xu, Facile preparation of porous Mn2SnO4/Sn/C composite cubes as high performance anode material for lithium-ion batteries. J. Phys. Chem. C 120 (7), 3669-3676 (2016).
• [8] G. Wang, Y. Jianlei, J. Xueyan, Microstructure and mechanical properties of Ti–22Al–25Nb alloy fabricated by elemental powder metallurgy, Mat. Sci. Eng. A-Struct. 654, 69-76 (2016).
• [9] Y. Bai, X. He, Y. Li, C. Zhu, S. Zhang, Rapid synthesis of bulk Ti2 AlC by self-propagating high temperature combustion synthesis with a pseudo-hot isostatic pressing process, J. Mater. Res. 24 (8), 2528-2535 (2009).
• [10] C. Chen, L. Guo, J. Luo, J. Hao, Z. Guo, A. A. Volinsky, Aluminum powder size and microstructure effects on properties of boron nitride reinforced aluminum matrix composites fabricated by semi-solid powder metallurgy, Mat. Sci. Eng. A-Struct. 646, 306-314 (2015).
• [11] V. Ćosović, N. Talijan, D. Živković, D. Minićand, Ž. Živković, Comparison of properties of silver-metal oxide electrical contact materials, J. Min. Metall. B 48 (1), 131-141(2012)

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).