Effect of Atmospheric-Pressure Gas-Plasma Treatment on Surface Properties of Hot-Dip Zn-Mg-Al Alloy-Coated Steel

• Autorzy: Jeong Chang-U , Kim Jae-Hyeon , Park Je-Shin , Kim Min-Su , Kim Sung-Jin , Oh Min-Suk

Identyfikatory

DOI

10.24425/amm.2023.141492

• Języki publikacji: EN

Abstrakty

EN

The effect of plasma-radical change on the surface properties of Zn-Mg-Al ternary-alloy-coated steel sheets during atmospheric-pressure (AP) plasma treatment using different process gases: O₂, N₂, and compressed air was investigated. The plasma-induced radicals promoted the formation of chemical particles on the surface of the Zn-Mg-Al coating, thereby increasing the surface roughness. The surface energy was calculated using the Owen-Wendt geometric equation. Contact angle measurements indicated that the surface free energy of the alloy sheets increased upon AP plasma treatment. The surface properties of the Zn-Mg-Al coating changed more significantly in the order air > O₂ > N₂ gas, indicating that the plasma radicals facilitated the carbonization and hydroxylation of the Mg and Al components during the AP plasma treatment.

Słowa kluczowe

EN

plasma treatment; Zn-Mg-Al-galvanized steel; surface energy; process gas

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 1
• Strony: 187--190
• Opis fizyczny: Bibliogr. 20 poz., rys., tab., wzory

Twórcy

autor

Jeong Chang-U

• Jeonbuk National University, Division of Advanced Materials Engineering, Jeonju, Republic of Korea

autor

Kim Jae-Hyeon

• Jeonbuk National University, Division of Advanced Materials Engineering, Jeonju, Republic of Korea

autor

Park Je-Shin

• Jeonbuk National University, Division of Advanced Materials Engineering, Jeonju, Republic of Korea

• https://orcid.org/0000-0002-7637-9550

autor

Kim Min-Su

• Korea Institute of Industrial Technology, Gimje, Republic of Korea

• https://orcid.org/0000-0003-1548-7635

autor

Kim Sung-Jin

• Sunchon National University, Department of Advanced Materials Engineering, Sunchon, Republic of Korea

• https://orcid.org/0000-0001-7911-6775

autor

Oh Min-Suk

• Jeonbuk National University, Division of Advanced Materials Engineering, Jeonju, Republic of Korea

• https://orcid.org/0000-0002-7274-2519

Bibliografia

• [1] R. Autengruber, G. Luckeneder, A.W. Hassel, Corros. Sci. 63, 12-19 (2012).
• [2] S.M. Joo, Y.G. Kim, Y.J. Kwak, D.J. Yoo, C.U. Jeong, J.P. Park, M.S. Oh, Materials 14, 6756 (2021).
• [3] S. Schuerz, M. Fleischanderl, G.H. Luckeneder, K. Preis, T. Haunschmied, G. Mori, A.C. Kneissl, Corros. Sci. 51, 2355-2363 (2009).
• [4] S. Schürz, G.H. Luckeneder, M. Fleischanderl, P. Mack, H. Gsaller, A.C. Kneissl, G. Mori, Corros. Sci. 52, 3271-3279 (2010).
• [5] T. Prosek, A. Nazarov, U. Bexell, D. Thierry, J. Serak, Corros. Sci. 50, 2216-2231 (2008).
• [6] M.S. Oh, S.H. Kim, J.S. Kim, J.W. Lee, J.H. Shon, Y.S. Jin, Met. Mater. Int. 22, 26-33 (2016).
• [7] J. Duchoslav, R. Steinberger, M. Arndt, T. Keppert, G. Luckeneder, K.H. Stellnberger, J. Hagler, G. Angeli, C.K. Riener, D. Stifter, Corros. Sci. 91, 311-320 (2015).
• [8] F. Thébault, B. Vuillemin, R. Oltra, C. Allely, K. Ogle, O. Heintz, Corros. Sci. 97, 100-106 (2015).
• [9] J.W. Lee, S.Y. Oh, B.R. Park, M.S. Oh, S.J. Kim, Korean. J. Met. Mater. 58, 610-616 (2020).
• [10] C. Ye, L. Jia, G. Xu, F. Wang, X. Wang, H. Zhan, Surf. Coat. Technol. 366, 214-226 (2019).
• [11] O. Zywitzki, Th. Modes, B. Scheffel, Ch. Metzner, Pract. Metallogr. 49, 4 (2012)
• [12] K. Pohl, O. Ozcan, M. Voigt, G. Grundmeier, Mater. Corros. 67, 10 (2016).
• [13] S. Knust, A. Kuhlmann, Teresa de los Arcos, G. Grundmeier, RSC Adv. 9, 35077-35088 (2019).
• [14] J. Duchoslav, M. Kehrer, T. Truglas, H. Groiß, M. Nadlinger, L. Hader-Kregl, C.K. Riener, M. Arndt, K.H. Stellnberger, G. Luckeneder, G. Angeli, T. Stehrer, D. Stifter, Appl. Surf. Sci. 504, 144457 (2020).
• [15] S. Wang, J. Min, J. Lin, C. Sun, S. Yang, AutomotInnov. 1, 237-246 (2018).
• [16] J.T, Park, J.E, Huh, S.E, Lee, J.H, Lee, W.H, Lee, K.H, Lim, Y.S, Kim, ACS Appl. Mater. Interfaces. 36, 30581-30586 (2018).
• [17] A. Karahan, E. Özdogan, Fibers Polym. 9 (1), 21-26 (2008).
• [18] S. Tang, O.J. Kwon, N. Lu, H.S. Cho, Surf. Coat. Technol. 195, 298-306 (2005).
• [19] M. Giza, G. Grundmeier, Plasma Process Polym. 8, 607-616 (2011).
• [20] M. Giza, P. Thissen, G. Grundmeier, Langmuir 24, 8688-8694 (2008).

Uwagi

1. This work was supported by the [National Research Foundation of Korea (NRF)] grant funded by the Korea Government (Ministry of Science and ICT) [No. 2022R1A2C1008972]. This work was also supported by the Technology Innovation Program (20012941, 20016850) funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea). This work was also supported in part by the Technology Development Program (S3160560, S3245299) funded by the Ministry of SMEs and Startups (MSS, Korea).

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).