The Influence of Extrusion Process on the Microstructure and Mechanical Properties of Magnesium Alloys

• Autorzy: Bednarczyk I. , Kuc D. , Tomaszewska A. , Mrugała A.

Identyfikatory

DOI

10.1515/amm-2017-0080

• Języki publikacji: EN

Abstrakty

EN

The article presents the results of plastic shaping tests of AZ61 and WE43 alloys. There were both classic extrusion tests as well as extrusion tests of KOBO method. An assessment was made of the influence of extrusion process parameters on the mechanical properties and the structure of the alloys. On the basis of achieved results of mechanical properties for alloys AZ31 and WE43 the susceptibility of those alloys to plastic shaping was determined. Quantitative tests of structure assessment in case of alloys AZ61 and WE43 after extrusion with the use of KOBO method were conducted with the use of METILO program. It has been shown that extrusion AZ61,WE43 alloys method KOBO leads to considerable fragmentation of grains.

Słowa kluczowe

EN

magnesium alloys; microstructure; mechanical properties; process of extrusion method KOBO

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2A
• Strony: 545--550
• Opis fizyczny: Bibliogr. 11 poz., rys., tab.

Twórcy

autor

Bednarczyk I.

• Silesian University of Technology, Faculty of Material Science And Metallurgy, 8 Krasińskiego Str.,40-019 Katowice, Poland

autor

Kuc D.

• Silesian University of Technology, Faculty of Material Science And Metallurgy, 8 Krasińskiego Str.,40-019 Katowice, Poland

autor

Tomaszewska A.

• Silesian University of Technology, Faculty of Material Science And Metallurgy, 8 Krasińskiego Str.,40-019 Katowice, Poland

autor

Mrugała A.

• Silesian University of Technology, Faculty of Material Science And Metallurgy, 8 Krasińskiego Str.,40-019 Katowice, Poland

Bibliografia

• [1] E. Hadasik, D. Kuc, G. Niewielski, R. Śliwa, Hutnik-Wiadomości Hutnicze (8), 580-584 (2010).
• [2] W. Bochniak, A. Korbel, P. Ostachowski, S. Źiółkowicz, J. Borowski, Plastic treatment of metals, Metal Forming 24 (2), 83-97, (2013).
• [3] E. Hadasik, D. Kuc, Plastic treatment of metals, Metal Forming 24 (2), 131-147 (2013).
• [4] A. Mrugała, I. Bednarczyk, Hutnik- Wiadomości- Hutnicze (8), 533-536 (2015).
• [5] J. Szala, Application of computer picture analysis methods to quantitative assessment of structure in materials, Scientific Journals of Silesian University of Technology, Series Metallurgy, Gliwice, (2008).
• [6] D. Kuc, E. Hadasik, I. Schindler, A. Mrugała, Metal 2015, 24th International Conference on Metallurgy and Materials, 351-357, Brno 2015, Czech Republic.
• [7] J. Bohlen, D. Letzig, K.U. Ulrich, Materials Science Forum (1-10), 546-549 (2007).
• [8] A. Mrugała, I. Bednarczyk, P. Ostachowski, M. Łagoda, Rudy Metale R61 (3), 136-139 (2016).
• [9] A. Korbel, W. Bochniak, J. Borowski, L. Błaż, P. Ostachowski, M. Łagoda, Journal of Materials Processing Technology 216, 160-168, (2015).
• [10] A. Korbel, W. Bochniak, Philosophical Magazine 93 (15), 1883-1913 (2013).
• [11] A. Korbel, W. Bochniak, P. Ostachowski, A. Paliborek, International Journal of Materials Research 102 (10), 974-79 (2013).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).