Synthesis of Mg-based alloys with rare-earth element addition by means of mechanical alloying

• Autorzy: Lesz Sabina , Hrapkowicz Bartłomiej , Gołombek Klaudiusz , Karolus Małgorzata , Janiak Patrycja

Identyfikatory

DOI

10.24425/bpasts.2021.137586

• Języki publikacji: EN

Abstrakty

EN

Magnesium-based alloys are widely used in the construction, automotive, aviation and medical industries. There are many parameters that can be modified during their synthesis in order to obtain an alloy with the desired microstructure and advantageous properties. Modifications to the chemical composition and parameters of the synthesis process are of key importance. In this work, an Mg-based alloy with a rare-earth element addition was synthesized by means of mechanical alloying (MA). The aim of this work was to study the effect of milling times on the Mg-based alloy with a rare-earth addition on its structure and microhardness. A powder mixture of pure elements was milled in a SPEX 8000D high energy shaker ball mill under an argon atmosphere using a stainless steel container and balls. The sample was mechanically alloyed at the following milling times: 3, 5, 8 and 13 h, with 0.5 h interruptions. The microstructure and hardness of samples were investigated. The Mg-based powder alloy was examined by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and using a Vickers microhardness test. The results showed that microhardness of the sample milled for 13 h was higher than that of those with milling time of 3, 5 and 8 h.

Słowa kluczowe

EN

mechanical alloying; magnesium; rare-earth element; ytterbium

PL

stopowanie mechaniczne; magnez; pierwiastek ziem rzadkich; iterb

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2021
• Tom: Vol. 69, nr 5
• Strony: art. no. e137586
• Opis fizyczny: Bibliogr. 39 poz., rys., tab.

Twórcy

autor

Lesz Sabina

• Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100, Gliwice, Poland

• https://orcid.org/0000-0002-2703-2059

autor

Hrapkowicz Bartłomiej

• Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100, Gliwice, Poland

• https://orcid.org/0000-0002-3772-9685

autor

Gołombek Klaudiusz

• Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100, Gliwice, Poland

• https://orcid.org/0000-0001-5188-1950

autor

Karolus Małgorzata

• Institute of Materials Engineering, University of Silesia, ul. 75 Pułku Piechoty 1a, 41-500 Chorzów, Poland

• https://orcid.org/0000-0002-2388-8036

autor

Janiak Patrycja

• Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100, Gliwice, Poland

Bibliografia

• [1] F. Witte, “The history of biodegradable magnesium implants: A review,” Acta Biomater., vol. 6, no. 5, pp. 1680–1692, 2010.
• [2] N. Eliaz, “Corrosion of metallic biomaterials: A review,” Materials (Basel)., vol. 12, no. 3, 2019.
• [3] S. Lesz, J. Kraczla, and R. Nowosielski, “Structure and compression strength characteristics of the sintered Mg-Zn-Ca-Gd alloy for medical applications,” Arch. Civ. Mech. Eng., vol. 18, no. 4, pp. 1288–1299, 2018.
• [4] T. Narushima, New-generation metallic biomaterials, 2nd ed. Elsevier Ltd., 2019.
• [5] D. Persaud-Sharma and A. Mcgoron, “Biodegradable magnesium alloys: A review of material development and applications,” J. Biomim. Biomater. Tissue Eng., vol. 12, no. 1, pp. 25–39, 2012.
• [6] N. Sezer, Z. Evis, S.M. Kayhan, A. Tahmasebifar, and M. Koç, “Review of magnesium-based biomaterials and their applications,” J. Magnes. Alloy., vol. 6, no. 1, pp. 23–43, 2018.
• [7] M.P. Staiger, A.M. Pietak, J. Huadmai, and G. Dias, “Magnesium and its alloys as orthopedic biomaterials: A review,” Biomaterials, vol. 27, no. 9, pp. 1728–1734, Mar. 2006.
• [8] S. Lesz, B. Hrapkowicz, M. Karolus, and K. Gołombek, “Characteristics of the Mg-Zn-Ca-Gd alloy after mechanical alloying,” Materials (Basel)., vol. 14, no. 1, pp. 1–14, 2021.
• [9] A. Drygała, L.A. Dobrzański, M. Szindler, M. Prokopiuk Vel Prokopowicz, M. Pawlyta, and K. Lukaszkowicz, “Carbon nanotubes counter electrode for dye-sensitized solar cells application,” Arch. Metall. Mater., vol. 61, no. 2A, pp. 803–806, 2016.
• [10] A. Drygała, M. Szindler, M. Szindler, and E. Jonda, “Atomic layer deposition of TiO2 blocking layers for dye-sensitized solar cells,” Microelectron. Int., vol. 37, no. 2, pp. 87–93, 2020.
• [11] M. Beniyel, M. Sivapragash, S.C. Vettivel, and P.S. Kumar, “Optimization of tribology parameters of AZ91D magnesium alloy in dry sliding condition using response surface methodology and genetic algorithm,” Bull. Polish Acad. Sci. Tech. Sci., pp. 1–10, 2021.
• [12] L.A. Dobrzański, L.B. Dobrzański, and A.D. Dobrzańska-Danikiewicz, “Manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics,” J. Achiev. Mater. Manuf. Eng., vol. 99, no. 1, pp. 14–41, 2020.
• [13] L.A. Dobrzański, L.B. Dobrzański, and A.D. Dobrzańska-Danikiewicz, “Overview of conventional technologies using the powders of metals, their alloys and ceramics in Industry 4.0 stage,” J. Achiev. Mater. Manuf. Eng., vol. 98, no. 2, pp. 56–85, 2020.
• [14] K. Cesarz-Andraczke and A. Kazek-Kęsik, “PEO layers on Mgbased metallic glass to control hydrogen evolution rate,” Bull. Polish Acad. Sci. Tech. Sci., vol. 68, no. 1, pp. 119–124, 2020.
• [15] M.K. Datta et al., “Structure and thermal stability of biodegradable Mg-Zn-Ca based amorphous alloys synthesized by mechanical alloying,” Mater. Sci. Eng. B, vol. 176, no. 20, pp. 1637–1643, Dec. 2011.
• [16] S.A. Abdel-Gawad and M.A. Shoeib, “Corrosion studies and microstructure of Mg-Zn-Ca alloys for biomedical applications,” Surf. Interfaces, vol. 14, no. August 2018, pp. 108–116, 2019.
• [17] M. Krämer et al., “Corrosion behavior, biocompatibility and biomechanical stability of a prototype magnesium-based biodegradable intramedullary nailing system,” Mater. Sci. Eng. C, vol. 59, pp. 129–135, 2016.
• [18] J. Kuhlmann et al., “Fast escape of hydrogen from gas cavities around corroding magnesium implants,” Acta Biomater., vol. 9, no. 10, pp. 8714–8721, 2013.
• [19] B. Hrapkowicz and S.T. Lesz, “Characterization of Ca 50 Mg 20 Zn 12 Cu 18 Alloy,” Arch. Foundry Eng., vol. 19, no. 1, pp. 75–82, 2019.
• [20] J. Wilson, Metallic biomaterials. Elsevier Ltd, 2018.
• [21] H.J. Yu, J.Q. Wang, X.T. Shi, D. V. Louzguine-Luzgin, H.K. Wu, and J.H. Perepezko, “Ductile biodegradable Mg-based metallic glasses with excellent biocompatibility,” Adv. Funct. Mater., vol. 23, no. 38, pp. 4793–4800, 2013.
• [22] B. Zberg, P.J. Uggowitzer, and J.F. Löffler, “MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants,” Nat. Mater., vol. 8, p. 887, Sep. 2009.
• [23] J. Byrne, E. O’Cearbhaill, and D. Browne, “Comparison of crystalline and amorphous versions of a magnesium-based alloy: corrosion and cell response,” Eur. Cells Mater., vol. 30, no. Supplement 3, p. 75, 2015.
• [24] O. Baulin, D. Fabrègue, H. Kato, A. Liens, T. Wada, and J.M. Pelletier, “A new, toxic element-free Mg-based metallic glass for biomedical applications,” J. Non. Cryst. Solids, vol. 481, no. September 2017, pp. 397–402, 2018.
• [25] M.B. Kannan and R.K.S. Raman, “In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid,” Biomaterials, vol. 29, no. 15, pp. 2306–2314, 2008.
• [26] M. Salahshoor and Y.B. Guo, “Biodegradation control of magnesium-calcium biomaterial via adjusting surface integrity by synergistic cutting-burnishing,” Procedia CIRP, vol. 13, pp. 143–149, 2014.
• [27] H. Wang, Y. Estrin, and Z. Zúberová, “Bio-corrosion of a magnesium alloy with different processing histories,” Mater. Lett., vol. 62, no. 16, pp. 2476–2479, 2008.
• [28] Y. Guangyin, L. Manping, D. Wenjiang, and A. Inoue, “Microstructure and mechanical properties of Mg-Zn-Si-based alloys,” Mater. Sci. Eng. A, vol. 357, no. 1–2, pp. 314–320, 2003.
• [29] Z. Liang et al., “Effects of Ag, Nd, and Yb on the microstructures and mechanical properties of Mg-Zn-Ca metallic glasses,” Metals (Basel)., vol. 8, no. 10, pp. 1–10, 2018.
• [30] S. Lesz, T. Tański, B. Hrapkowicz, M. Karolus, J. Popis, and K. Wiechniak, “Characterisation of Mg-Zn-Ca-Y powders manufactured by mechanical milling,” J. Achiev. Mater. Manuf. Eng., vol. 103, no. 2, pp. 49–59, 2020.
• [31] S.M. Al Azar and A.A. Mousa, Mechanical and physical methods for the metal oxide powders production. INC, 2020.
• [32] I. Polmear, D. StJohn, J.-F. Nie, and M. Qian, Novel Materials and Processing Methods. 2017.
• [33] C. Liu, Z. Ren, Y. Xu, S. Pang, X. Zhao, and Y. Zhao, “Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review,” Scanning, vol. 2018. 2018.
• [34] M. Pogorielov, E. Husak, A. Solodivnik, and S. Zhdanov, “Magnesium-based biodegradable alloys: Degradation, application, and alloying elements,” Interventional Med. Appl. Sci., vol. 9, no. 1. pp. 27–38, 2017.
• [35] Y.Q. Tang, Q.Y. Wang, Q.F. Ke, C.Q. Zhang, J.J. Guan, and Y.P. Guo, “Mineralization of ytterbium-doped hydroxyapatite nanorod arrays in magnetic chitosan scaffolds improves osteogenic and angiogenic abilities for bone defect healing,” Chem. Eng. J., vol. 387, no. January, p. 124166, 2020.
• [36] C. Suryanarayana, “Mechanical alloying and milling,” Prog. Mater Sci., vol. 46, no. 1–2. Pergamon, pp. 1–184, 01-Jan-2001.
• [37] M. Karolus, “Applications of Rietveld refinement in Fe-B-Nb alloy structure studies,” J. Mater. Process. Technol., vol. 175, no. 1–3, pp. 246–250, 2006.
• [38] L.A. Dobrzański, B. Tomiczek, G. Matula, and K. Gołombek, “Role of Halloysite Nanoparticles and Milling Time on the Synthesis of AA 6061 Aluminium Matrix Composites,” Adv. Mater. Res., vol. 939, pp. 84–89, May 2014.
• [39] M. Jurczyk, Bionanomaterials for Dental Applications. Pan Stanford Publishing, 2012.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).