Structure and Properties of Lightweight Ceramic Aggregates Based on Local Silesian Waste Materials

• Autorzy: Smoleń J. , Pawlik T. , Sopicka-Lizer M. , Michalik D.

Identyfikatory

DOI

10.24425/123807

• Języki publikacji: EN

Abstrakty

EN

This paper is focused on the manufacturing and properties of light weight aggregates made from local waste materials. The waste materials were car windshield glass contaminated by PVB foil, fly ash, mine slates as well as wastes after toothpaste production. The main aim of the research was to combine car windshield glass and the aluminosilicate coal mine slates as a basis for light weight aggregates manufacturing. Fly ash were added in order to modify rheological properties of the plastic mass. Toothpaste wastes were introduced as a source of carbonates and CO₂ evolution during thermal treatment. After milling and mixing all materials they were pressed and sintered at temperature range of 950°C-1100°C in air. The results show that it is possible to receive light weight aggregates only from the Silesian local waste materials. The significant influence of sintering temperature on properties of aggregates was observed.

Słowa kluczowe

EN

light weight aggregates; waste material; windshield glass; recycling

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 3
• Strony: 1321--1328
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Smoleń J.

• Silesian University of Technology, Department of Material Science, Ul. Krasinskiego 8, 40-019 Katowice, Poland

autor

Pawlik T.

• Silesian University of Technology, Department of Material Science, Ul. Krasinskiego 8, 40-019 Katowice, Poland

autor

Sopicka-Lizer M.

• Silesian University of Technology, Department of Material Science, Ul. Krasinskiego 8, 40-019 Katowice, Poland

autor

Michalik D.

• Silesian University of Technology, Department of Material Science, Ul. Krasinskiego 8, 40-019 Katowice, Poland

Bibliografia

• [1] Stan środowiska w województwie śląskim w latach 2002-2015. Wojewódzki Inspektorat Ochrony Środowiska w Katowicach
• [2] T. Y. Lo, H. Cui, S. A. Memon, T. Noguchi, Manufacturing of sintered lightweight aggregate using high-carbon fly ash and its effect on the mechanical properties and microstructure of concrete, Journal of Cleaner Production 112, 753-762 (2016).
• [3] R. Pampuch, Wykłady o ceramice, Wydawnictwa AGH Kraków 16, 59 (2013)
• [4] I. J. Chiou, K. S. Wang, C. H. Chen, Y. T. Lin, Lightweight aggregate made from sewage sludge and incinerated ash, Waste Management 26, 1453-61 (2006).
• [5] X. Wanga, Y. Jin, Z. Wang, Y. Nie, Q. Huang, Q. Wanga, Development of lightweight aggregate from dry sewage sludge and coal ash, Waste Management 29, 1330-5 (2009).
• [6] C. R. Cheeseman, G. S. Virdi, Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash, Resources Conservation and Recycling 45 (1), 18-30 (2005).
• [7] A. Mueller, A. Schnell, K. Ruebner, The manufacture of lightweight aggregates from recycled masonry rubble, Construction and Building Materials 98, 376-387 (2015).
• [8] E. Żelazowska, P. Pichniarczyk, M. Najduchowska, Lekkie kruszywa szklano-krystaliczne z surowców odpadowych dla przemysłu materiałów budowlanych, Ceramic Materials 66 (3), 321-330 (2014).
• [9] V. Ducman, B. Mirtic, The applicability of different waste materials for the production of lightweight aggregates, Waste Management 29, 2361-68 (2009).
• [10] M. Godzierz, P. Wilkołek, G. Torun, T. Pawlik, M. Sopicka-Lizer, Influence of leather tanning waste addition and sintering parameters on physical and mechanical properties of ceramic granules, Materials Engineering 211 (3), 131-136 (2016).
• [11] M. Sopicka-Lizer, Popioły śląskich elektrowni jako źródło sialonu - właściwości popiołów i ich wpływ na skład fazowy produktu redukcji karbotermicznej, Inżynieria Materiałowa 3, 113-121 (2002).

Uwagi

EN

1. The study was financially supported by NCBR under the GEKON2/O5/267917/14/2015 project

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).