An Evaluation of the Stability of Mould Flux Properties in the Process of Continuous Steel Casting

• Autorzy: Falkus J.

Identyfikatory

DOI

10.1515/amm-2017-0130

• Języki publikacji: EN

Abstrakty

EN

This paper presents research on the mould slag formed on the basis of two mould fluxes. In the conducted industrial experiments, slag was sampled in equal time intervals between adding subsequent portions of mould flux. The research focused on the an evaluation of the stability of slag parameters by assessing the change in its liquidus temperature. It was shown that a mould flux needs to be assessed individually taking into account the casting process parameters and the steel cast grade.

Słowa kluczowe

EN

mould fluxes; alumina inclusions; liquidus temperature; flux consumption

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2A
• Strony: 885--889
• Opis fizyczny: Bibliogr. 7 poz., rys., wzory

Twórcy

autor

Falkus J.

• AGH University of Science and Technology in Krakow, Faculty of Metal Engineering and Industrial Computer Science, Al. Mickiewicza 30, 30-059 Krakow, Polska

Bibliografia

• [1] S. Seetharaman (Ed.), Industrial Processes, Part A, 2014 Elsevier, Waltham.
• [2] T. Schulz, B. Lychatz, N. Haustein, D. Janke, Metall. and Materi. Trans. B 44B (4), 317-327 (2013).
• [3] T. Schulz, D. Janke, H.-P. Heller, B. Lychatz, Stahl und Eisen, 128 (4), 65-73 (2008).
• [4] J. Lamut, J. Falkus, B. Jurjevec, et al., Arch. Metall. Mater. 57, 1, 319-324 (2012).
• [5] A. Cwudziński, J. Jowsa, in: T. Chandra, N. Wanderka, W. Reimers et al. (Ed.), 6th International Conference on Processing and Manufacturing of Advanced Materials, Berlin Aug. 25-29, 209, Thermec 2009, PTS 1-4 Book Series: Materials Science Forum V. 638-642, 3176-3181, Part 1-4, published 2010.
• [6] T. Tanaka, M. Nakamoto, J. Lee, at al. in: R.E. Aune, M. Kekkonen (Ed.), Proceedings of Metal Separation Technology held Copper Mountain, Helsinki University of Technology, June 2004, 135-142
• [7] M. Tadleckova, K. Michalek, P. Machovcak: 24th International Conference on Metallurgy and Materials, Tanger Ltd, Brno Czech Republic, 2015, 54-59.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).