PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Identification based on a finite element model of an impact force occurring on a composite structure

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Based on the inverse approach and the finite element method, the quality of a reconstructed signal is discussed in this work. The responses caused by a distributed impact on a portion of a composite structure can be recovered using dynamic analysis. The structure is thought to be complex and made up of two different-sized plates made of two different materials. The robustness of the inversion method was studied, as well as the sensitivity of the numerical method compared to modal truncation and sampling of the frequency response function (FRF). Once the FRF had been identified, regularized deconvolution as per generalized singular value decomposition was used to reconstruct the impact signal characteristics. It was revealed that only one mode is required to reconstruct the impact signal.
Rocznik
Strony
23--36
Opis fizyczny
Bibliogr. 20 poz., rys., tab., wykr.
Twórcy
  • Department STIC, National School of Applied Sciences, Abdelmalek Essaadi University Tetouan, MOROCCO
  • MASGC, National School of Applied Sciences, Abdelmalek Essaadi University, Tetouan, MOROCCO
  • Department STIC, National School of Applied Sciences, Abdelmalek Essaadi University Tetouan, MOROCCO
  • MASGC, National School of Applied Sciences, Abdelmalek Essaadi University, Tetouan, MOROCCO
autor
Bibliografia
  • [1] Miller A.G., Lovell D.T. and Seferis J.C. (1994): The Evolution of an aerospace material: influence of design, manufacturing and in-service performance.– Composite Structures, vol.27, No.1-2, pp.193-206.
  • [2] Ahmadian H., Mottershead J. and Friswell M. (1998): Regularisation methods for finite element model updating.– Mechanical Systems and Signal Processing, vol.12, No.1, pp.47-64.
  • [3] Zhao X. and Ye B. (2022): Feature frequency extraction algorithm based on the singular value decomposition with changed matrix size and its application in fault diagnosis.– Journal of Sound and Vibration, p.526, 116848.
  • [4] Lim T.W. and Pilkey W.D. (1992): A solution to the inverse dynamics problem for lightly damped flexible structures using a model approach.– Computers & Structures, vol.43, No.1, pp.53-59.
  • [5] Busby H.R. and Trujillo D.M. (1987): Solution of an inverse dynamics problem using an eigenvalue reduction technique.– Computers & Structures, vol.25, No.1, pp.109-117.
  • [6] Chinka S.S.B., Putti S.R. and Adavi B.K. (2021): Modal testing and evaluation of cracks on cantilever beam using mode shape curvatures and natural frequencies.– Structures, vol.32, pp.1386-1397.
  • [7] El-Bakari A., Khamlichi A. and Dkiouak R. (2013): Effect of mesh size and mode truncation on reconstruction of force characteristics for non-punctual impacts on composite elastic beams.– Advanced Materials Research, vol.682, pp.33-40.
  • [8] Liu J., Qiao B., Chen Y., Zhu Y., He W. and Chen X. (2022): Impact force reconstruction and localization using nonconvex overlapping group sparsity.– Mechanical Systems and Signal Processing, p162, 107983.
  • [9] Giurgiutiu V. (2022): Structural health monitoring and nondestructive evaluation applications of the stress, vibration, and wave analysis in aerospace composites.– Stress, Vibration, and Wave Analysis in Aerospace Composites, Massachusetts: Academic Press.
  • [10] Damm A.M., Spitzmüller C., Raichle A.T.S., Bühler A., Weißgraeber P. and Middendorf P. (2020): Deep learning for impact detection in composite plates with sparsely integrated sensors.– Smart Materials and Structures, vol.29, No.12, p.125014.
  • [11] Varghese C. K. and Shankar K. (2011): Identification of structural parameters using combined power flow and acceleration approach in a substructure.– International Journal of Engineering and Technology Innovation, vol.1, No.1, pp.65-79.
  • [12] Jiang X.Q. and Hu H.Y. (2009): Reconstruction of distributed dynamic loads on a thin plate via mode-selection and consistent spatial expression.– Journal of Sound and Vibration, vol.323, No.3-5, pp.626-644.
  • [13] Carrera E., Fazzolari F.A. and Demasi L. (2001): Vibration analysis of anisotropic simply supported plates by using variable kinematic and Rayleigh-Ritz method.– Journal of Vibration and Acoustics, vol.133, No.6, p.061017.
  • [14] Inoue H., Harrigan J.J. and Reid S.R. (2001). Review of inverse analysis for indirect measurement of impact force.– Applied Mechanic Reviews, vol.54, No.6, pp.503-524.
  • [15] Qiao B., Zhang X., Luo X. and Chen X. (2015): A force identification method using cubic B-spline scaling functions.– Journal of Sound and Vibration, vol.337, pp.28-44.
  • [16] Tikhonov A.N. and Arsenin V.Y. (1997): Solutions of ill-posed problems. New York: Wiley.
  • [17] Hansen P.C. (1999): Regularization tools version 3.0 for Matlab 5.2.– Numerical Algorithms, vol.20, pp.195-196.
  • [18] Liu Q., Wang F., Li J. and Xiao W. (2021): A hybrid support vector regression with multi-domain features for low-velocity impact localization on composite plate structure.– Mechanical Systems and Signal Processing, Article ID 107547, p.154.
  • [19] Liu J., Hei C.H., Luo M., Yang D., Sun C.H. and Feng A. (2022): A study on impact force detection method based on piezoelectric sensing.– Sensors, vol.22, No.14, p.5167.
  • [20] El-Bakari A., Dkiouak R., Khamlichi A., Jacquelin E. and Limam A. (2012): Influence of mesh size and truncation order on reconstruction of impact force on composite elastic beams.– International Review of Applied Sciences and Engineering, vol.3, No.2, pp.105-111.
Uwagi
PL
Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-9c076f2d-52da-4016-a74e-1eaa31fd24f4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.