Archives of Civil and Mechanical Engineering - Tom Vol. 15, no. 2 (2015) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 15, no. 2

Czasopismo

Archives of Civil and Mechanical Engineering

Wydawca

Springer
Wrocław University of Science and Technology

Rocznik

2015

Identyfikatory

Zawartość wolumenu

Vol. 15, no. 2
- artykuł: Microstructure evolution in warm forged sintered ultrahigh carbon steel (Szczepanik S., Nikiel P., Mitchell S. C., Kawalla R.), s. 301--307
- artykuł: The analysis of phase transformation of undercooled austenite and selected mechanical properties of low-alloy steel with boron addition (Łętkowska B., Dziurka R., Bała P.), s. 308--316
- artykuł: Using the explosive cladding method for production of Mg-Al bimetallic bars (Mroz S., Stradomski G., Dyja H., Galka A.), s. 317--323
- artykuł: Synthesis and characterization of titanium carbide particulate reinforced AA6082 aluminium alloy composites via friction stir processing (Thangarasu A., Murugan N., Dinaharan I., Vijay S. J.), s. 324--334
- artykuł: Experimental studies on ultrasonically assisted friction stir spot welding of AA6061 (Rostamiyan Y., Seidanloo A., Sohrabpoor H., Teimouri R.), s. 335--346
- artykuł: Determination of tool life and research wear during duplex stainless steel turning (Krolczyk G. M., Nieslony P., Legutko S.), s. 347--354
- artykuł: Estimating the real contact area between sliding surfaces by means of a modified OFC model (Avlonitis M., Kalaitzidou K.), s. 355--360
- artykuł: A child seat numerical model validation in the static and dynamic work conditions (Baranowski P., Damaziak K., Malachowski J., Mazurkiewicz L., Muszyński A.), s. 361--375
- artykuł: Absorbed energy by foam-filled quadrangle tubes during the crushing process by considering the interaction effects (Niknejad A., Abedi M. M., Liaghat G. H., Nejad M. Z.), s. 376--391
- artykuł: Ways of reducing the impact of mechanical vibrations on hydraulic valves (Stosiak M.), s. 392--400
- artykuł: Nonlinear motion characteristics of microarches under axial loads based on modified couple stress theory (Farokhi H., Ghayesh M. H.), s. 401--411
- artykuł: Maintenance of belt conveyors using an expert system based on fuzzy logic (Mazurkiewicz D.), s. 412--418
- artykuł: Identification and evaluation of processes in a construction enterprise (Hoła B.), s. 419--426
- artykuł: Laboratory tests of pipelines reinforced with close-fit Trolining liner (Abel T.), s. 427--435
- artykuł: Automated identification and classification of internal defects in composite structures using computed tomography and 3D wavelet analysis (Katunin A., Dańczak M., Kostka P.), s. 436--448
- artykuł: 2D tolerance and asymptotic models in elastodynamics of a thin-walled structure with dense system of ribs (Michalak B.), s. 449--455
- artykuł: Analysis of laterally restrained cold-formed C-shape purlins according to Vlasov theory (Gosowski B., Kubica E., Rykaluk K.), s. 456--468
- artykuł: On possible applications of smart structures controlled by self-stress (Gilewski W., Al Sabouni-Zawadzka A.), s. 469--478
- artykuł: Experimental and numerical investigation of rotational friction dampers with multi units in steel frames subjected to lateral excitation (Mirzabagheri S., Sanati M., Aghakouchak A. A., Khadem S. E.), s. 479--491
- artykuł: Control of a two-degree-of-freedom system with combined excitations (Bauomy H. S., El-Sayed A. T.), s. 492--508
- artykuł: Causes of imminent failure damage and repair of steel building purlins (Biegus A.), s. 509--515
- artykuł: The analysis of the stages of scaffolding "life" with regard to the decrease in the hazard at building works (Błazik-Borowa E., Szer J.), s. 516--524
- artykuł: Optimal arrangement of reinforcement in composites (Fedeliński P., Górski R.), s. 525--531
- artykuł: Characterization of the uniaxial compression behaviour of unreinforced masonry - sensitivity analysis based on a numerical and experimental approach (Sousa R., Guedes J., Sousa H.), s. 532--547
- artykuł: Kaiser effect observation in reinforced concrete structures and its use for damage assessment (Vidya Sagar R., Raghu Prasad B. K., Singh R. K.), s. 548--557
- artykuł: Determination of steel fibres distribution in self-compacting concrete beams using X-ray computed tomography (Ponikiewski T., Gołaszewski J., Rudzki M., Bugdol M.), s. 558--568
- artykuł: Impedance spectroscopy study of the effect of environmental conditions in the microstructure development of OPC and slag cement mortars (Ortega J. M., Sánchez I., Climent M. A.), s. 569--583
- artykuł: Stochastic identity of test result series of the compressive strength of concrete in industrial production conditions (Jasiczak J., Kanoniczak M., Smaga Ł.), s. 584--592
- artykuł: Structural stability and reliability of the underground steel tanks with the Stochastic Finite Element Method (Kamiński M., Świta P.), s. 593--602
- artykuł: Mechanics of adhesive joints as a plane problem of the theory of elasticity. Part II: Displacement formulation for orthotropic adherends (Rapp P.), s. 603--619

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.