The standard milling time of flat surfaces without outline restrictions

• Autorzy: Skoczylas L. , Skoczylas K. , Wydrzyński D.

Identyfikatory

DOI

10.12913/22998624/64061

• Języki publikacji: EN

Abstrakty

EN

Knowing the standard operating times of technological operations is essential element in the business operations of every production enterprise. It is the basis for establishing the production capacity, planning the production schedule, or even calculating costs. The article presents a variety of methods used in the calculation of standard worktime of technological operations. An especially important distinction was made between calculating the total machining time and the actual cutting time. Through the examination of various machined flat surfaces, the results of worktime calculations from CATIA and the authored mathematical model are presented

Słowa kluczowe

EN

machining time; concentric milling; bidirectional milling; cutting time; additional time

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2016
• Tom: Vol. 10, nr 31
• Strony: 229--234
• Opis fizyczny: Bibliogr. 11 poz., fig., tab.

Twórcy

autor

Skoczylas L.

• Department of Manufacturing and Production Engineering, The Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

autor

Skoczylas K.

• Department of Manufacturing and Production Engineering, The Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

autor

Wydrzyński D.

• Department of Manufacturing and Production Engineering, The Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, Al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

Bibliografia

• 1. Germani M., Mandolini M., Cicconi P.: Manufacturing cost estimation during early phases of machine design. International Conference on Engineering Design. ICED11. Technical University of Denmark, 2011.
• 2. Feld M.: Basics of designing technological processes typical of machine parts. WNT. Warszawa 2000, (in Polish).
• 3. Engineers’ handbook. Machining. T.2. WNT. Warszawa 1993, (in Polish).
• 4. Hietikko E.: Estimation of manufacturing cost in the early stages of product development project. International Journal of Modern Engineering Research, 2 (6), 2012.
• 5. Budiono H., Kiswanto G., Soemardi T.: Method and model development for manufacturing cost estimation during the early design phase related to the complexity of the machining processes. International Journal of Technology, 2, 2014.
• 6. Karpiuk M.: Manufacturing cost estimation of machined parts based on 3D CAD model. Procax Matirials. Mechanik, 1/2015, (in Polish).
• 7. Hbaieb M., Othmani R., Bouzid W.: Time modeling in high-speed machining of mold pocket. International Journal of Advanced Manufacturing Technology, 53, 2011.
• 8. Heo E.Y., Kim D.W., Kim B.H., Chen F.: Estimation of NC machining time using NC block distribution for sculptured surface machining. Robotics and Computer-Integrated Manufacturing, 22, 2006.
• 9. Liu C., Li Y., Wang W., Shen W.: A feature-based method for NC machining time estimation. Robotics and Computer-Integrated Manufacturing, 29, 2013.
• 10. Marowski W., Linkiewicz G., Filipek A., Makowski J.: Cost estimation of machine parts in the design process. Bulletin WAT. Vol. LVI, special number, 2007, (in Polish).
• 11. Kuryjański R.: Machining and machine. Politechnika Warszawska. Warszawa 2011.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.