Powiadomienia systemowe
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Now, the use of any medical device based on metals or alloys, especially intended for dentistry applications, is impossible without preclinical evaluation of its anticorrosion properties. Today, the use of stainless steels with AISI standardization, with predilection 316L and 321, are preferred for ergonomic reasons due to their high operational reliability and optimal mechanical properties for functionality over time. In this regard, 316L and 321 stainless steels are tested for comparison in the solution that simulates human saliva with different pH. Stainless steel samples were subjected to corrosion in Fusayama-Meyer and Carter-Brugirard saliva. In-situ electrochemical measurements were applied, such as the open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS). The results show that the corrosion resistance of 316L is superior to 321 in saliva solution at both pH values.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
371--376
Opis fizyczny
Bibliogr. 27 poz., rys, tab.
Twórcy
autor
- Competences Centre: Interfaces-Tribocorrosion and Electrochemical Systems (CC-ITES), Dunarea de Jos University of Galati, 47 Domneasca Street, RO-800008 Galati, Romania
autor
- Competences Centre: Interfaces-Tribocorrosion and Electrochemical Systems (CC-ITES), Dunarea de Jos University of Galati, 47 Domneasca Street, RO-800008 Galati, Romania
Bibliografia
- [1] R.I.M. Asri, W.S.W. Harun, M. Samykano, N.A.C. Lah, S.A.C. Ghani, F. Tarlochan, M.R. Raza, Mater. Sci. Eng. C. 77, 1261-1274 (2017).
- [2] R. Misra, C. Nune, T. Pesacreta, M. Somani, L. Karjalainen, Acta Biomater. 9, 6245-6258 (2013).
- [3] C.C. Shih, C.M. Shih, Y.Y. Su, L.H.J. Su, M.S. Chang, S.J. Lin, Corros. Sci. 46, 427-441 (2004).
- [4] V. Neaga, L. Benea, The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science 43 (4), 34-41 (2020). DOI: https://doi.org/10.35219/mms.2020.4.07
- [5] L. Reclaru, R. Lerf, P.Y. Eschler, J.M. Meyer, Biomaterials 22, 267-279 (2001).
- [6] A.A. Tiamiyu, U. Eduok, J.A. Szpunar, A.G. Odeshi, Sci. Rep. 9 (1), 12116 (2019).
- [7] R. Singh, N.B. Dahotre, J. Mater. Sci. Mater. Med. 18, 725-751 (2007).
- [8] Y.N. Petrov, G.I. Prokopenko, B.N. Mordyuk, M.A. Vasylyev, S.M. Voloshko, V.S. Skorodzievski, V.S. Filatova, Mater. Sci. Eng. C. 58, 1024-1035 (2016).
- [9] S. Capelo, L. Proença, J.C.S. Fernandes, I.T.E. Fonseca, Int. J. Electrochem. Sci. 9, 593-609 (2014).
- [10] L. Benea, Metode avansate de investigare a materialelor, Galaţi: Academica, ISBN 978-606-606-003-5 (2017).
- [11] R. Galo, R.F. Ribeiro, R.C.S. Rodrigues, L.A. Rocha, M.G.C. Mattos, Braz. Dent. J. 23 (2), 141-148 (2012).
- [12] P. Ming, S. Shao, J. Qiu, Y. Yu, J. Chen, J. Yang, W. Zhu, M. Li, C. Tang, RSC Adv. 7 (10), 5843-5852 (2017).
- [13] S. Mercieca, C.M. Caligari, J. Buhagiar, J. Camilleri, J. Appl. Biomater. Func. 16 (1) 47-54 (2017).
- [14] N. Simionescu, L. Benea, A. Ravoiu, International Multidisciplinary Scientific GeoConference: SGEM 6.1, 169-176 (2018).
- [15] L. Benea, Surface IOP Conf. Ser.: Mater. Sci. Eng. 374, 012014 (2018).
- [16] L. Dragus, L. Benea, N. Simionescu, A. Ravoiu, V. Neaga, IOP Conf. Ser.: Mater. Sci. Eng. 572, 012005 (2019).
- [17] Sr. Renita, A. Chattree, S. Rajendran, Der Pharma Chemica 9, 25-31 (2017).
- [18] V. Neaga, L. Benea, A. Alexandru, Int. J. Electrochem. Sci. 15, 9568-9578 (2020).
- [19] Y. Tipanan, T. Pasutha, C. Pintu, Orthod. Waves 77, 79-89 (2018).
- [20] L. Benea, E. Danaila, P. Ponthiaux, Corros. Sci. 91, 262-271 (2015).
- [21] L. Benea, N Simionescu, Int. J. Electrochem. Sci. 16, 210244 (2021).
- [22] L. Benea, Coroziune şi Protecţii Anticorozive - De la Teorie la Practică, Galaţi: Academica, ISBN: 978-973-8937-99-4 (2017).
- [23] J.B. Jorcin, M.E. Orazem, N. Pébère, B. Tribollet, Electrochim. Acta 51, 1473-1479 (2006).
- [24] V.M.W. Huang, V. Vivier, I. Frateur, M.E. Orazem, B. Tribollet, J. Electrochem. Soc. 154, C89-98 (2007).
- [25] M.E. Orazem, N. Pébère, B. Tribollet, J. Electrochem. Soc. 153 (4), B129-B136 (2006).
- [26] F. Farelas, M. Galicia, B. Brown, S. Nesic, H. Castaneda, Corros. Sci. 52, 509-517 (2010).
- [27] C.A. Schiller, W. Strunz, Electrochim. Acta 46, 3619-3625 (2001).
Uwagi
1. All the experimental work was performed at Competences Center Interfaces - Tribocorrosion and Electrochemical Systems (CC-ITES). The authors would like to express appreciation for Prof. Jean-Pierre Celis from Katholieke University of Leuven, Belgium and Prof. Pierre Ponthiaux from Ecole Centrale Paris, France for they valuable scientific advice. The authors also acknowledge the support of this work by the project ANTREPRENORDOC, in the framework of Human Resources Development Operational Programme 2014-2020 (POCU), financed from the European Social Fund under the contract number 36355/23.05.2019 HDR OP/380/6/13-SMIS Code: 123847.̋
2. Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-9a6a139a-cde6-479d-bbb9-9e7101937177