Dynamic Test and Analysis of Strength of Bamboo Curtain Plywood Based on Free Vibration Modal Method

• Autorzy: Gu Xiaoyu , Zhou Aijin , Adjei Patrick , Zhang Rongzhuo , Zhou Yuhao , Wang Zheng

Identyfikatory

DOI

10.53502/wood-176766

• Języki publikacji: EN

Abstrakty

EN

Bamboo curtain plywood is made of equal-thickness slotted bamboo slivers as its constituent units and is formed into boards with high pressure. In this paper, rectangular plates, beam specimens, and two sizes of square plates were tested to determine the elastic modulus and shear modulus of bamboo curtain plywood quickly, easily, and accurately. The free square board torsional vibration method was used to test the shear modulus of the square plates. The dynamic test results were also verified by means of the static four-point bending method. The main conclusions show that the dynamic elastic modulus, shear modulus and Poisson's ratio of this bamboo curtain plywood are 0.7 GPa, 1300 MPa and 0.12, respectively. The values of the elastic constants of these bamboo curtain plywood specimens measured by dynamic and static methods are consistent, and this dynamic test method has the advantages of fast, easy, good repeatability and high accuracy.

Słowa kluczowe

EN

bamboo wood; plywood; elastic modulus; shear modulus; Poisson's ratio; dynamic test

• Wydawca: Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
• Czasopismo: Drewno : prace naukowe, doniesienia, komunikaty
• Rocznik: 2023
• Tom: Vol. 66, nr 212
• Strony: Art. no. 176766
• Opis fizyczny: Bibliogr. 42 poz., rys., tab., wykr.

Twórcy

autor

Gu Xiaoyu

• College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, China

• https://orcid.org/0000-0001-5315-5557

autor

Zhou Aijin

• Fujian Xinhengda Compartment Backplane Co., Ltd., Lianyungang, Sanming, China

autor

Adjei Patrick

• College of Civil Engineering, Nanjing Forestry University, Nanjing, China

autor

Zhang Rongzhuo

• College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, China

autor

Zhou Yuhao

• College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, China

autor

Wang Zheng

• College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, China

Bibliografia

• Ahmad J., Zhou Z., & Deifalla A. F. [2023]. Structural properties of concrete reinforced with bamboo fibers: a review. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2023.03.038
• Ahmad M. and Kamke F A. [2005]: Analysis of Calcutta bamboo for structural composite materials: physical and mechanical properties. Wood Science & Technology,39[6]:448-459. DOI:10.1007/s00226-005-0016-y
• Chen S., Wei Y., Zhu J., Lin Y., Du H. [2023]. Experimental investigation of the shear performance of bamboo scrimber beams reinforced with bamboo pins. Construction and Building Materials, 365: 130044. https://doi.org/10.1016/j.conbuildmat.2022.130044
• Chen Y. [2003]. A study on development patterns of bamboo industry in China. Chinese academy of forestry. https://kns.cnki.net/KCMS/detail/detail.aspx?dbname=CMFD9904&filename=2003093689.nh
• Dauletbek A., Li H., Xiong Z., and Lorenzo R. [2021]: A review of mechanical behavior of structural laminated bamboo lumber. Sustainable Structures, 1[1]: 000004. DOI:10.54113/j.sust.2021.000004.
• Dauletbek A., Li H., and Lorenzo R. [2023]. A review on mechanical behavior of laminated bamboo lumber connections. Composite Structures, 116898. https://doi.org/10.1016/j.compstruct.2023.116898
• Darzi S., Karampour H., Bailleres H., Gilbert B. P., Fernando D. [2020]: Load bearing sandwich timber walls with plywood faces and bamboo core. Structures, 27: 2437-2450. DOI:10.1016/j.istruc.2020.08.020
• Dong W., Wang Z., Zhou J., and Gong M. [2021]: Experimental study on bending properties of cross-laminated timber-bamboo composites. Construction and Building Materials, 300:124313. DOI:10.1016/j.conbuildmat.2021.124313
• Gao L., Wang Z., and Ren Y. [2012]: Influence of hot pressing method and mat moisture content on properties of bamboo plywood. Chinese Journal of Wood Science and Technology, 26[06]: 9-12. DOI:10.19455/j.mcgy.2012.06.003.
• Ghavami K. [2008]: Bamboo: Low cost and energy saving construction materials. In Modern bamboo structures. CRC Press,17-34.
• Giaccu G. F., Meloni D., Concu G., Valdes M., and Fragiacomo M. [2019]: Use of the cantilever beam vibration method for determining the elastic properties of maritime pine cross-laminated panels. Engineering Structures, 200: 109623. DOI:10.1016/j.engstruct.2019.109623
• Guan X., Yin H., Liu X., Wu Q., Gong M. [2018]: Development of lightweight overlaid laminated bamboo lumber for structural uses. Construction and Building Materials 188: 722-728. DOI:10.1016/j.conbuildmat.2018.08.107
• Guo J. [2007a]: Manufacturing Technology of bamboo-curtain plywood using modified MF resin. Chinese Journal of Wood Science and Technology,1[06]:4-6. DOI:10.19455/j.mcgy.2007.06.002.
• Guo T. [2007b]: Present situation and future development of our country's bamboo gum plank templates. Research & Application of Building Materials,1[11]:20-22. DOI:10.13923/j.cnki.cn14-1291/tu.2007.11.006.
• Karampour H., Darzi S., Gilbert B., P., and Bailleres H. [2018]: Flexural behaviour of a novel bamboo-plywood sandwich composite panel. WCTE2018, 2018.
• Li H., Gao T., Cheng G., and Lorenzo R. [2023a]. Pin groove compressive performance of laminated bamboo lumber at different angles. Cellulose, 30(1), 557-573. https://doi.org/10.1007/s10570-022-04920-z
• Li H., Xu W., Chen C., Yao L., and Lorenzo R. [2023b]. Temperature Influence on the Bending Performance of Laminated Bamboo Lumber. Journal of Materials in Civil Engineering, 35(5), 04023072. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004730
• Li J. [2013]: Preparation and Mechanical Properties Evaluation of Glued Laminated Bamboo. Chinese academy of forestry. https://kns.cnki.net/KCMS/detail/detail.aspx?dbname=CMFD201401&filename=1013378476.nh
• Li Q., Chen X., H., Qi W., Wu H., Li J., and Lin J. [2020]: Analysis of Bonding Mechanism of Glass Fiber-reinforced Bamboo Plywood. BioResources,15[1]:529-543. DOI:10.15376/BIORES.15.1.529-543
• Liu K., Jayaraman D., Shi Y., Harries K., Yang J., Jin W., Shi Y., Wu C., Jacome J. P., and Trujillo D. [2022]: “Bamboo: A Very Sustainable Construction Material”- 2021 International Online Seminar summary report. Sustainable Structures, 2[1]:000015. DOI:10.54113/j.sust.2022.000015.
• Mimendi L., Lorenzo R., and Li H. [2022]: An innovative digital workflow to design, build and manage bamboo structures. Sustainable Structures, 2[1]:000011. DOI:10.54113/j.sust.2022.000011.
• Peng Y., Wang Z.H., Ai X. [2018]: Wind-induced fragility assessment of urban trees with structural uncertainties. Wind & Structures, 26[1]: 45-56. DOI:10.12989/was.2018.26.1.045
• Quintero M.A.M., Tam C.P.T., and Li H. [2022]: Structural analysis of a Guadua bamboo bridge in Colombia. Sustainable Structures, 2[2]:000020. DOI:10.54113/j.sust.2022.000020.
• Su J., Li H., Xiong Z., and Lorenzo R. [2021]: Structural design and construction of an office building with laminated bamboo lumber. Sustainable Structures,1[2]:000010. DOI:10.54113/j.sust.2021.000010.
• Timoshenko S. [1965]: Mechanical vibration. Beijing: Engineering Industry Press. 1965:316-333.
• Wu W., Chen S., Ma X. [2012]: Test Research on Flexural and Shear Properties of Bamboo Plywood. Applied Mechanics and Materials, 2012, 166-169:2951-2957. DOI:10.4028/www.scientific.net/AMM.166-169.2951
• Zhang Z., Li Y., and Liu R. [2015]: An analytical model of stresses in adhesive bonded interface between steel and bamboo plywood. International Journal of Solids and Structures, 52:103-113. DOI:10.1016/j.ijsolstr.2014.09.024
• Wang Z., Xie W., Lu Y., Li H., Wang Z.H., and Li Z. [2019b]: Dynamic and static testing methods for shear modulus of oriented strand board. Construction and Building Materials, 216: 542-551. DOI:10.1016/j.conbuildmat.2019.05.004
• Wang Z., H., Wang Z., Wang B.J., Wang Y., Liu B., Rao X., Wei P., and Yang Y. [2014]: Dynamic Testing and Evaluation of Modulus of Elasticity (MOE) of SPF Dimension Lumber. BioResources, 2014, 9[3]: 3869-3882. DOI:10.15376/biores.9.3.3869-3882.
• Wang Z.H., Gao Z.Z., Wang Y.L., Cao Y., Wang G., Liu B., and Wang Z. [2015]: A new dynamic testing method for elastic, shear modulus and Poisson’s ratio of concrete. Construction and Building Materials, 100:129-135. DOI:10.1016/j.conbuildmat.2015.09.060
• Wang Z.H., Wang Y.L., Cao Y., Wang Z. [2016]: Meas-urement of shear modulus of materials based on the torsional mode of cantilever plate. Construction and Building Materials, 2016, 124:1059-1071. DOI:10.1016/j.conbuildmat.2016.08.104
• Wang Z., Xie W., Lu Y., Li H., Wang Z. H. and Li Z. [2018]: Dynamic and static testing methods for shear modulus of oriented strand board. Construction and Building Materials, 2019, 216: 542-551. DOI: 10.1016/j.conbuildmat.2019.05.004
• Wang Z., Fu H.Y., Ding Y.W., Cao Y., Wang Y.L., Wu X., and Zhang T. [2019a]: Dynamic testing of shear modulus and elastic modulus of oriented strand board. Scientia Silvae Sinicae, 55[8]: 136-146. DOI:10.11707/j.1001-7488.20190815
• Wang Z., Gu X., Mohrmann S., Shen Z., Huang Y., and Zhou Y. [2023]. Study on the four-point bending beam method to improve the testing accuracy for the elastic constants of wood. European Journal of Wood and Wood Products, 1-11. https://doi.org/10.1007/s00107-023-01955-2
• Wang Z.H., Ghanem R. [2021]: An extended polynomial chaos expansion for PDF characterization and variation with aleatory and epistemic uncertainties. Computer Methods in Applied Mechanics and Engineer-ing, 382, 113854. DOI:10.1016/j.cma.2021.113854
• Wang Z.H., Ghanem R. [2022]: A functional global sensitivity measure and efficient reliability sensitivity analysis with respect to statistical parameters. Computer Methods in Applied Mechanics and Engineering, 115175. DOI:10.1016/j.cma.2022.115175
• Yin S. C. [1996] Wood science. China Forestry Publishing House, Beiing
• Zhao M., Li X., Zhang D. Z., and Zhai W. [2023]. Geometry effect on mechanical properties and elastic isotropy optimization of bamboo-inspired lattice structures. Additive Manufacturing, 64, 103438. https://doi.org/10.1016/j.addma.2023.103438
• Zhou J., Zhao W., Tang K., and Peng W. [2016]: Seismic performance of square, thin-walled steel tube/bamboo plywood composite hollow columns with binding bars. Soil Dynamics and Earthquake Engineering, 89:152-162. DOI:10.1016/j.soildyn.2016.07.014
• Zhou Y., Huang Y., Sayed U., and Wang Z. [2021]: Research on dynamic characteristics test of wooden floor structure for gymnasium. Sustainable Structures, 1[1]:000005. DOI:10.54113/j.sust.2021.000005.
• List of standards
• GB/T13123-2003 Bamboo-mat plywood
• EN-12369-2-2004 Wood-based panels – Characteristic values for structural design – Part 2: plywood