Investigation on the anti-penetration performance of UD - three-dimensional orthogonal woven fabric composite reinforced structure

• Autorzy: Shen Chaoming , Chen Yang , Liu Lei , Zhang Zexin , Tang Baijian , Li Fushan , Qian Denghui

Identyfikatory

DOI

10.15632/jtam-pl/170712

• Języki publikacji: EN

Abstrakty

EN

A uni-direction (UD) laminate and three-dimensional (3D) orthogonal woven fabric made of ultra high molecular weight polyethylene (UHMWPE) are used as main reinforced units combined with aluminum alloy plates to form a reinforced sandwich structure. Penetration tests are carried out on four composite reinforced structures with different structure forms by a 7.62 mm steel core projectile. The target plate size is 150 mm×150 mm. Besides, Ansys/LS -Dyna software is applied to simulate the penetration process, and the simulation results are in good agreement with the test results. All the results demonstrate that with the same total thickness of UD laminates, 20 mm UD laminates have better penetration resistance than four 5 mm UD laminates. The less the number of UD laminates, the better anti-penetration performance of the overall structure. The 3D orthogonal woven fabric has the advantage of spatial integrity, which can effectively restrain deformation of laminates and absorb energy behind UD laminates, so as to obtain better anti-penetration performance. In the core structure with a total thickness of 28 mm, when the thickness ratio of 3D orthogonal woven fabric is between 30% and 35%, the protection ability and lightweight requirements of the sandwich structure can be better considered.

Słowa kluczowe

EN

three-dimensional orthogonal woven fabric; anti-penetration performance; ultra-high molecular weight polyethylene; thickness ratio

• Wydawca: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
• Czasopismo: Journal of Theoretical and Applied Mechanics
• Rocznik: 2023
• Tom: Vol. 61 nr 4
• Strony: 701--714
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Shen Chaoming

• School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang, China

autor

Chen Yang

• School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang, China

autor

Liu Lei

• School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang, China
• China Merchants Jinling Shipyard (Yangzhou) Dingheng Co., Ltd.

autor

Zhang Zexin

• School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang, China

autor

Tang Baijian

• School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang, China
• School of Civil Engineering, Suzhou University of Science and Technology, Suzhou, China

autor

Li Fushan

• China Special Equipment Inspection and Research Institute, Jiaxing, China

autor

Qian Denghui

• School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang, China

Bibliografia

• 1. Chen L., Du T., Xiao X., et al., 2019, Experimental and numerical simulation of 7075 aluminum target impacted with ogival-nosed projectiles, Ordnance Materials Science and Engineering, 42, 5, 27-32
• 2. Deng Y., Yuan J., Xu J., 2018, Effect of impact angle of rigid oval projectile on penetration characteristics of braided composite laminates, Journal of Composite Materials, 35, 8
• 3. Hu M., Sun B., Gu B., 2021, Microstructure modeling multiple transverse impact damages of 3D braided composite based on thermo-mechanical coupling approach, Composites: Part B: Engineering, 214
• 4. Johnson G.R., Cook W.H., 1983, A constitutive model and data for metals subjected to large strains, high strain rates and high temperature, Proceeding of the 7th International Symposium on Ballistics, Hague, Netherlands: International Ballistics Committee, 541-547
• 5. Liang J., Fang G., 2014, Mechanical Properties Analysis Method of Three-Dimensional Braided Composites, Harbin: Harbin University of Technology Press
• 6. Liu L., 2020, Research on Anti-Penetration Performance of Ship Protection Module Based on Fiber Reinforcement, Jiangsu University of Science and Technology
• 7. Qu K.F., Wu C.Q., Liu J., Yao Y., Deng Y., Yi C., 2020, Ballistic performance of multi- -layered aluminium and UHMWPE fibre laminate targets subjected to hypervelocity impact by tungsten alloy ball, Composite Structures, 253
• 8. Song M., Xuan H, He Z., et al., 2020, A review of research on 3D braided – woven composite casing containment, Journal of Mechanical Engineering, 8, 31-35+40
• 9. Sun B., Liu Y., Gu B., 2009, A unit cell approach of finite element calculation of ballistic impact damage of 3D orthogonal woven composite, Composites: Part B: Engineering, 40, 6, 552-560
• 10. Tan H., Xu S., Huang X., et al. 2018, Impact damage simulation and experimental verification of 3D four-way braided composite macro-finite element model, Journal of Composites, 35, 5, 1139- 1148
• 11. Tang D., Zhou B., Zhou Z., 2002, Experimental study on energy absorption characteristics of steel tube under lateral explosion shock wave loading, Explosion and Impact, 22, 2, 41-46
• 12. Walter T.R., Subhash G., Sankar B.V., Yen C.F., 2009, Damage modes in 3D glass fiber epoxy woven composites under high rate of impact loading, Composites: Part B, 40, 584-589
• 13. Wu L., Wang W., Jiang Q., Xiang C., Lou C.-W., 2019, Mechanical characterization and impact damage assessment of hybrid three-dimensional five-directional composites, Journal of Polymers, 11, 9
• 14. Xiong Z., Liu X., Zhang Z., et al., 2016, Preliminary study on three-dimensional knitted fabric and its engineering protection application, Journal of Natural Science of Xiangtan University, 40, 5, 65-70
• 15. You-Zhi L., Guo-Xin Z., Yue-Ming Z., 2008, Study on concrete moisture and drying shrinkage based on mesoscopical damage model, Engineering Mechanics, 25, 7, 196-201

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr POPUL/SP/0154/2024/02 w ramach programu "Społeczna odpowiedzialność nauki II" - moduł: Popularyzacja nauki (2025).