Characteristic Investigation of Macro Fiber Composite Structure Using FE Model

• Autorzy: Saravanan M. P. , Marimuthu Krishnaswamy , Jayabal Kaliappan

Identyfikatory

DOI

10.24425/amm.2021.136425

• Języki publikacji: EN

Abstrakty

EN

In this investigation, the effective mechanical, coupling and dielectric properties of Macro-fiber-composites (MFCs) consisting of piezorod-element constituents are determined using representative volume element method combined with finite element analysis. Experiments are conducted on piezo-bar-element MFCs to understand the applicability of the proposed approach which would later be extended to composites with modified geometric pattern. The longitudinal strains with respect to static deflections of beam and forced displacements under varying electrical loads are measured for the MFCs, and compared with the numerical simulations. Based on the good agreement from the result comparisons of piezo-bar-element MFCs, the effective material properties of piezo-rod-element MFCs are numerically determined based on the RVE approach.

Słowa kluczowe

EN

macro-fiber composite; finite-element model; piezoelectric composite; ANSYS; RVE method

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 4
• Strony: 1059--1066
• Opis fizyczny: Bibliogr. 29 poz., fot., rys., tab., wzory

Twórcy

autor

Saravanan M. P.

• Mohamed Sathak AJ College of Engineering, Chennai, India

• https://orcid.org/0000-0002-8152-8848

autor

Marimuthu Krishnaswamy

• Coimbatore Institute of Technology, Coimbatore, India

• https://orcid.org/0000-0001-9791-1238

autor

Jayabal Kaliappan

• Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, Chennai, India

• https://orcid.org/0000-0002-0365-3002

Bibliografia

• [1] R.J. Prazenica, D. Kim, H. Moncayo, B. Azizi, M. Chan, Design, Characterization, and Testing of Macro-Fiber Composite Actuators for integration on a Fixed-Wing UAV, Proc. of SPIE 9057, 905715-2 (2014).
• [2] J.R. Farmer, A comparison of power harvesting techniques and related energy storage issues, Master of Science Thesis, Virginia Polytechnic Institute and State University, May (2017).
• [3] J. Schröck, T. Meurer, A. Kugi, Control of a flexible beam actuated by macro-fiber composite patches: II. Hysteresis and creep compensation, experimental results, Smart Mater. Struct. 20, 015016 (2011).
• [4] R.B. Williams, Nonlinear Mechanical and Actuation Characterization of Piezoceramic Fiber Composites, PhD Thesis, Virginia Polytechnic Institute and State University, March (2004).
• [5] S. Ju, C.H. Ji, Indirect impact based Piezoelectric Energy Harvester for Low Frequency Vibration, IEEE Transd., USA, 978-1-4799-8955-3, June 21-25 (2015).
• [6] Y. Kuang, M. Zhu, Evaluation and validation of equivalent properties of macro fibre composites for piezoelectric transducer modelling, Compos. Part B-Eng. 158, 189-197 (2019).
• [7] Z. Dong, C. Faria, B.P. Luymers, M. Hromčí, M. Šebek, W. Desmet, Structure-preserving low-order modeling approach of laminated composite plates integrated with macro-fiber composite transducers for dynamic application, Compos. Struct. 208, 287-297 (2019).
• [8] J. Latalski, Modelling of Macro fiber composite piezoelectric active elements in abaqus system, E. I Niezawodnosc-Main. and Relia., December (2011).
• [9] M. Khazaee, A. Rezaniakolaie, L. Rosendahl, A broadband macro-fiber-composite piezoelectric energy harvester for higher energy conversion from practical wideband vibrations, Nano Energy 76, 104978 (2020).
• [10] R.B. Williams, D.J. Inman, Nonlinear Tensile and Shear Behavior of Macro Fiber Composite Actuators, J. Compos. Mater. 38 (2004)
• [11] C.S. Guimarães, V.P. Budinger, F.L.S. Bussamra, J.A. Hernandes, Structural Shape Control using Macro Fiber Composite Piezoelectric Sensors and Actuators, Comput. Mech., Argentina, 8263-8279, 15-18 (2010).
• [12] Jose M. Simoes Moita, Isidoro F.P. Correia, Cristovao M. Mota Soares, Carlos A. Mota Soares, Active control of adaptive laminated structures with bonded piezoelectric sensors and actuators, Compu Struct. 82, 1349-1358 (2004).
• [13] Y.X. Hao, K.F. Zhao, W. Zhang, S.W. Yang, Nonlinear dynamics and dynamic instability of smart structural cross-ply laminated cantilever plates with MFC layer using zigzag theory, Appl. Mathematical Mod (2019). DOI: https://doi.org/j.apm.2019.10.056 (in press).
• [14] Shun-Qi Zhang, Ya-Xi Li, Rudiger Schmidt, Modeling and simulation of macro-fiber composite layered smart structures, Comp. Struct 51, (2015).
• [15] Satyajit Panda, M.C. Ray, Nonlinear finite element analysis of functionally graded plates integrated with patches of piezoelectric fiber reinforced composite, Finite Elements in Analysis and Design 44, 493-504 (2008)
• [16] A. Pandey, A. Arockiarajan, An experimental and theoretical fatigue study on macro fiber composite (MFC) under thermo-mechanical loadings, Eur. J. Mech. A-Solid (2017). DOI: https://doi.org/10.1016/j.euromechsol.2017.06.005
• [17] A. Pandey, A. Arockiarajan, Fatigue study on the sensor performance of Macro Fiber Composite (MFC): Theoretical and experimental approach, Compos. Struct. 174, 301-318 (2017).
• [18] A. Pandey, A. Arockiarajan, Performance studies on Macro Fiber composite(MFC) under thermal condition using Kirchhoff and Mindlin plate theories, int. J. Mech. Sci. (2017). DOI: https://doi.org/10.1016/j.ijmecsci.2017.06.034
• [19] K.L. Acosta, S. Srivastava, W.K. Wilkie, D.J. Inman, Primary and secondary pyroelectric effects in macro-fiber composites, Compos. Part B-Eng. 177, 107275 (2019).
• [20] D. Tan, P. Yavarow, A. Erturk, Nonlinear elastodynamics of piezoelectric macro-fiber composites with interdigitated electrodes for resonant actuation, Compos. Struct. (2017). DOI: https://doi.org/10.1016/j.compstruct.2017.12.056
• [21] Q. Jiao, Ji. Hongli, Q. Jinhao, The synergism of peak to peak value, frequency and superimposed DC bias voltage on electric-field-induced strain of PZT based-macro fiber composites, Ceram. int. 45, 22067-22077 (2019).
• [22] K. Steiger, P. Mokrý, Finite element analysis of the macro fiber composite actuator: macroscopic elastic and piezoelectric properties and active control thereof by means of negative capacitance shunt circuit, IOP Publishing, Smart Mater. Struct. 24, 025026 (2015).
• [23] S. Sreenivasa Prasath, A. Arockiarajan, Effective electromechanical response of macro-fiber composite (MFC): Analytical and numerical models, int. J. Mech. Sci. 77, 98-106 (2013).
• [24] Z. Abas, H.S. Kim, L. Zhai, J. Kim, Finite element analysis of vibration driven electro-active paper energy harvester with experimental verification, Adv. Mech. Eng. 22, 1-9 (2015).
• [25] IEEE Standards on Piezoelectricity, ANSI/IEEE Standard, The institute of Electrical and Electronic Engineers, New York, 1988.
• [26] S. Sreenivasa Prasath, A. Arockiarajan, Analytical, numerical and experimental electromechanical predictions of the effective properties of macro-fiber composite (MFC), Sensor. Actuat. A-Phy. 214, 31-44 (2014).
• [27] M.P. Saravanan, K. Marimuthu, P. Sivaprakasam, Modeling and analysis of dynamic structure with macro fiber composite for energy harvesting, Mater. Today-Proc. (2020). DOI: https://doi.org/10.1016/j.matpr.2020.05.390, 2214-7853 (in press).
• [28] Smart-Material Corporation, MFC Datasheet, https://www.smart-material.com/Datasheets.html
• [29] A. Pandey, A. Arockiarajan, Actuation performance of macro-fiber composite (MFC): Modeling and experimental studies, Sensor. Actuat. A-Phy. 248, 114-129 (2016).

Uwagi

1. The authors acknowledge the funding support from AICTE, New Delhi under Research Proposal Scheme, for High-Voltage Amplifier Setup. The authors also acknowledge the experimental facility provided at Advanced Manufacturing Technology lab by Coimbatore institute of Technology, Coimbatore, India.

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).