Realization and Verification of Data Conversion from Laser Scanner to FEM

• Autorzy: Sapietová Alžbeta , Štalmach Ondrej , Sága Milan , Stančeková Dana , Gajdoš Lukáš

Identyfikatory

DOI

10.12913/22998624/113285

• Języki publikacji: EN

Abstrakty

EN

This paper deals with the data processing in the form of a point cloud scanned using a handheld 3D laser scanner. The aim of the paper was to use this data to create a representative FEM model and compare two different ap¬proaches, one them involved creating a CAD model and the other one did not. The data processing was carried out in the freeware systems MeshLab and Meshmixer and FEM analysis in the software ANSYS Workbench.

Słowa kluczowe

EN

3D laser scanner; data processing; CAD model; MeshLab; Ansys Workbench

PL

skaner laserowy 3D; przetwarzanie danych; model CAD; MeshLab; Ansys Workbench

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2020
• Tom: Vol. 14, no 1
• Strony: 69--74
• Opis fizyczny: Bibliogr. 19 poz., fig.

Twórcy

autor

Sapietová Alžbeta

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovak Republic

autor

Štalmach Ondrej

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovak Republic

autor

Sága Milan

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovak Republic

autor

Stančeková Dana

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovak Republic

autor

Gajdoš Lukáš

• Schaffler Slovakia, Dr G Schaefflera 1, Kysucke Nove Mesto, Slovak Republic

Bibliografia

• 1. Barta D., Mruzek M., Labuda, R., Skrucany T., Gardinsky L. Posslity of increasing vehicle energy balance using coasting, Advances in science and technology-research journal, 12, 2018, 228–235.
• 2. Barta D., Mruzek M., Factors influencing the hybrid drive of urban public transport buses. Management systems in production engineering, 20(4), 2015, 213–218.
• 3. Bocko J., Lengvarsky P. Application of Finite Element Method for Analysis of Nanostructures. Acta mechanica et automatica, 11(3), 2017, 116–120.2. (5) Bolitho M., Kazhdan M., Burns R. and Hoppe H. Parallel Poisson Surface Reconstruction. 5th International Symposium on Visual Computing. Las Vegas, NV; United States 2009, 678–689.
• 4. Dekýš V., Kopas P., Sapieta M., Števka O. A detection of deformation mechanisms using infrared thermography and acoustic emission. In: Applied Mechanics and Materials, 474, 2014, 315–320.
• 5. Halama R., Markopoulos A., Fojtik F., Fusek M., Poruba Z. and Famfulik J. Effect of stress amplitude on uniaxial ratcheting of aluminum alloy. Materialwissenschaft und Werkstofftechnik, 48(8), 2017, 814–819.
• 6. Jakubovičová L., Sága M., Vaško M., Numerical study of influence of mutual slewing of roller bearing rings on the principal stresses at contact area. Scientific journal of Silesian University of Technology – Series Transport 84, 2014, 83–91.
• 7. Kopas P., Sága M., Baniari V., Vaško M., Handrik M., A plastic strain and stress analysis of bending and torsion fatigue specimens in the low-cycle fatigue region using the finite element methods. Procedia Engineering, 177, 2017, 526–531.
• 8. Krawiec P., Domek G., Warguła Ł., Waluś K. and Adamiec J. The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys. Sklene Teplice; Slovakia 2018, MATEC Web of Conferences, 157.
• 9. Kovacikova P., Bezdedova R., Vavro J., Jr., and Vavro J.Comparison of numerical analysis of stress-strain states of cast iron with vermicular graphite shape and globular graphite shape. VratnaTerchova; Slovakia, Procedia Engineering, 136, 2016, 28–32.
• 10. Kubiak M., Domanski T. and Dekys V., Measurement of strain during tension test of welded joint using multi-camera 3D correlation system, Procedia Engineering, 177, 2017, 107–113.
• 11. Leitner B. and Vaško M., Design and Modelling of Tank Wagon Assembly Operations in CAM Environment. In Kaunas and Klaipėda, Lithuania, Transport Means 2015 I & II, 87–90.
• 12. Macko M., Flizikowski J., Szczepański Z., Tyszczuk K., Śmigielski G., Mroziński A., Czerniak J. and Tomporowski A., CAD/CAE applications in mill’s design and investigation. Lecture Notes in Mechanical Engineering, 2017, 343–351.
• 13. Macko M., Tyszczuk K., Śmigielski G., Flizikowski J. and Mroziński A., The use of CAD applications in the design of shredders for polymers. Sklene Teplice; Slovakia, MATEC, 157, 2018, 02027.
• 14. Novak P.and Zmindak M. Optimization of Cold Sleeve Reparied Piping with Regard to Cohesive Failure. Scientific journal of silesian university of technology-series transport, 76, 2012, 93–98.
• 15. Novak P., Zmindak M. and Pelagic Z. High-Pressure Pipelines Repaired by Steel Sleeve and Epoxy Composition. Litomerice, CZECH REPUBLIC, Applied Mechanics and Materials, 2013, 486, 181–188.
• 16. Stalmach O., Implementation and verification of data conversion from the laser scanner to the FEM. Diploma thesis, Zilina: University of Zilina, 2017.
• 17. Son S., Park H. and Lee J. Automated laser scanning system for reverse engineering and inspection. International Journal of Machine Tools and Manufacture, 42, 2002, 889–897.
• 18. Varady T., Martin RR. and Cox J. Reverse engineering of geometric models and introduction, Computer Aided Design, 29, 1997, 255–268.
• 19. Zmindak M., Pastorek P., Falat P. and Sapieta M. Hardening monitoring and contact stress analysis of test samples, Proceedings of the institution of mechanical engineers part f-journal of rail and rapid transit, 230(1), 2016, 253–257.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).