PL
 |
EN

PL EN

Preferencje help
Polish version English version Język
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A FCG Model and the Graphical User Interface Under Matlab for Predicting Fatigue Life: Parametric Studies

Autorzy
Kebir Tayeb , Correia José A.F.O. , Benguediab Mohamed , Imad Abdellatif
Treść / Zawartość
Pełne teksty:
Kebir_A-FCG_FAS_2022.pdf
Identyfikatory
DOI
10.2478/fas-2021-0011
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The focus of this research work was predicting the fatigue life of mechanical components used for industrial and transport systems. To understand how the phenomenon of fatigue occurs in a material, the fatigue crack growth is studied. The purpose of this work was to create a graphical user interface (GUI) under Matlab to allow researchers to conduct the parametric studies of fatigue crack propagation to predict fatigue life. In this work, three models for fatigue crack propagation were used: those of Paris, Walker and Forman in order to study the three parameters: the Paris exponent m, load ratio R and hardness KIC, respectively. In addition, a novel model FCG was developed to study the influence of the hardening parameters (K′, n′) on fatigue crack propagation. The comparison of the simulation results with those in the literature shows good agreement.
Słowa kluczowe
EN
Wydawca
Wydawnictwa Naukowe Sieci Badawczej Łukasiewicz - Instytutu Lotnictwa
Czasopismo
Fatigue of Aircraft Structures
Rocznik
2021
Tom
Iss. 13
Strony
116--139
Opis fizyczny
Bibliogr. 60 poz., rys., tab., wykr., wzory
Twórcy
autor
Kebir Tayeb
kebir.tayeb@cuniv-naama.dz
  • Department of Technical Sciences, Institute of Science and Technology, University Center Salhi Ahmed, Naama, Algeria
autor
Correia José A.F.O.
  • CONSTRUCT & Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal
autor
Benguediab Mohamed
  • Laboratory of Materials and Systems Reactive, Faculty of Technology, University of Sidi Bel Abbes, Algeria
autor
Imad Abdellatif
  • Laboratory of Mechanical of Lille, University of Lille1, Polythech’Llle1, France
Bibliografia
  • [1] Grasso, M., Penta, F., Pinto, P. and Pucillo, G.P. (2013). A four-parameters model for fatigue crack growth data analysis. Frat. ed Integrita Strutt., vol. 26, pp. 69-79. DOI: 10.3221/IGF-ESIS.26.08.
  • [2] Kebir, T., Benguediab, M. and Imad, A. (2017). A Model for Fatigue Crack Growth in the Paris Regime under the Variability of Cyclic Hardening and Elastic Properties. Fatigue of Aircraft Structure, vol. 2017, no. 9, pp. 117-135. DOI: 10.1515/fas-2017-0010.
  • [3] Forth, S.C., Wright, C.W. and Johnston, W.M. (2005). 7075-T6 and 2024-T351 aluminum alloy fatigue crack growth rate data. Virginia: NASA Langely Research Center. (NASA/TM-2005-213907), pp. 1-19.
  • [4] Ould Chikh, B., Imad, A. and Benguediab, M. (2008). Influence of the cyclic plastic zone size on the propagation of the fatigue crack in case of 12NC6 steel. Computational Materials Science, vol. 43, pp. 1010-1017. DOI: 10.1016/j.commatsci.2008.02.019.
  • [5] Kim, J.-K. and Shim, D.-S. (2000). The variation in fatigue crack growth due to the thickness effect. International Journal of Fatigue, vol. 22, pp. 611-618. DOI: 10.1016/S0142-1123(00)00032-3.
  • [6] Kebir, T., Benguediab, M. and Imad, A. (2017). Influence of the variability of the elastics properties on plastic zone and fatigue crack growth. Mechanics and Mechanical Engineering, vol. 21, no. 4, pp. 919-934.
  • [7] Paul, S.K. and Tarafder, S. (2013). Cyclic plastic deformation response at fatigue crack tips. International Journal of Pressure Vessels and Piping, vol. 101, pp. 81-90. DOI: 10.1016/j.ijpvp.2012.10.007.
  • [8] Jean-Christophe, L.R. (1999). Étude du comportement et de L’endommagement en fatigue d’un acier inoxydable austéno-ferritique moulé Vieilli. PhD Thesis, Ecole Centrale de Paris.
  • [9] Prasad, K., Kumar, V., Bhanu Sankara Rao, K. and Sundararaman, M. (2016). Effects of crack closure and cyclic deformation on thermomechanical fatigue crack growth of a Near α Titanium Alloy. Metallurgical and Materials Transactions A, vol. 47, pp. 3713-3730. DOI: 10.1007/s11661-016-3482-y.
  • [10] Borges, M.F., Antunes, F.V., Prates, P.A. and Branco, R. (2020). A numerical study of the effect of isotropic hardening parameters on mode I fatigue crack growth. Metals, vol. 10, no. 2, p. 177. DOI: 10.3390/met10020177.
  • [11] Borges, M.F., Antunes, F.V., Prates, P., Branco, R., Vasco-Olmo, J.M. and Díaz, F.A. (2020). Model for fatigue crack growth analysis. Procedia Structural Integrity, vol. 25, no. 2020, pp. 254-261. DOI: 10.1016/j.prostr.2020.04.030.
  • [12] Alaoui, A.E.M. (2005). Influence du chargement sur la propagation en fatigue de fissures courtes dans un acier de construction navale. Thesis Doctor, University of Metz.
  • [13] Yahiaoui, B. and Petrequin, P. (1974). Etude de la propagation de fissures par fatigue dans des aciers inoxydables austénitiques à bas carbone du type 304L et 316L. Rev. Phys. Appl. (Paris), vol. 9, no. 4, pp. 683-690. DOI: 10.1051/rphysap:0197400904068300.
  • [14] Singh, P.J., Achar, D.R.G., Guha, B. and Nordberg, H. (2003). Fatigue life prediction of gas tungsten arc welded AISI 304L cruciform joints with different LOP sizes. International Journal of Fatigue, vol. 25, no. 1, pp. 1-7. DOI: 10.1016/S0142-1123(02)00067-1.
  • [15] Ould Chikh, E.B., Nianga, J.M., Imad, A. and Benguediab, M. (2007). Correlation between the coefficients C and m of paris law for fatigue crack growth and the effect of the variability of these parameters on the prediction of the lifetime in the case of heat treated 12NC6 steel. CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France. From https://hal.archives-ouvertes.fr/hal-03362074.
  • [16] Xiang, Y., Lu, Z. and Liu, Y. (2010). Crack growth-based fatigue life prediction using an equivalent initial flaw model. Part I: Uniaxial loading. International Journal of Fatigue, vol. 32, no. 2, pp. 341-349. DOI: 10.1016/j.ijfatigue.2009.07.011.
  • [17] Mann, T. (2006). Fatigue assessment methods for welded structures and their application to an aluminium T-joint. PhD Doctor, University of science and technology, Norwegian.
  • [18] Melson, J. H. (2014). Fatigue crack growth analysis with finite element methods and a monte carlo simulation. Thesis Master, Faculty of the Virginia Polytechnic Institute.
  • [19] Mann, T. (2007). The influence of mean stress on fatigue crack propagation in aluminium alloys. International Journal of Fatigue, vol. 29, no. 8, pp. 1393-1401. DOI: 10.1016/j.ijfatigue.2006.11.010.
  • [20] Correia, J.A.F.O. et al. (2016). Modified CCS fatigue crack growth model for the AA2019-T851 based on plasticity-induced crack-closure. Theoretical and Applied Fracture Mechanics, vol. 85, pp. 26-36. DOI: 10.1016/j.tafmec.2016.08.024.
  • [21] Forman, R.G., Shivakumar, V., Cardinal, J.W., Williams, L.C. and McKeighan, P.C. (2005). Fatigue crack growth database for damage tolerance analysis. Springfield, Virginia: NTIS. (DOT/FAA/AR-05/15).
  • [22] Mohanty, J.R., Verma, B.B. and Ray, P.K. (2009). Prediction of fatigue crack growth and residual life using an exponential model: Part I (constant amplitude loading). International Journal of Fatigue, vol. 31, pp. 418-424. DOI: 10.1016/j.ijfatigue.2008.07.015.
  • [23] Johan Singh, P., Mukhopadhyay, C., Jayakumar, T., Mannan, S. and Raj, B. (2007). Understanding fatigue crack propagation in AISI 316 (N) weld using Elber’s crack closure concept: Experimental results from GCMOD and acoustic emission techniques. International Journal of Fatigue, vol. 29, no. 12, pp. 2170-2179. DOI: 10.1016/j.ijfatigue.2006.12.013.
  • [24] Alrubaie, K., Barroso, E. and Godefroid, L. (2006). Fatigue crack growth analysis of pre-strained 7475-T7351 aluminum alloy. International Journal of Fatigue, vol. 28, no. 8, pp. 934-942. DOI: 10.1016/j.ijfatigue.2005.09.008.
  • [25] Wang, Y., Cui, W., Wu, X., Wang, F. and Huang, X. (2008). The extended McEvily model for fatigue crack growth analysis of metal structures. International Journal of Fatigue, vol. 30, no. 10-11, pp. 1851-1860. DOI: 10.1016/j.ijfatigue.2008.01.014.
  • [26] Božić, Ž. Mlikota, M. Schmauder, S. (2011). Application of the ΔK, ΔJ and ΔCTOD parameters in fatigue crack growth modelling. Tehnicki Vjesnik, vol. 18, no. 3, pp. 459-466.
  • [27] Klingbeil, N.W. (2003). A total dissipated energy theory of fatigue crack growth in ductile solids. International Journal of Fatigue, vol. 25, pp. 117-128. DOI: 10.1016/S0142-1123(02)00073-7.
  • [28] Yao, Y., Fine, M.E. and Keer, L.M. (2007). An energy approach to predict fatigue crack propagation in metals and alloys. International Journal of Fracture, vol. 146, no. 3, pp. 149-158. DOI: 10.1007/s10704-007-9156-4.
  • [29] Pugno, N., Ciavarella, M., Cornetti, P. and Carpinteri, A. (2006). A generalized Paris’ law for fatigue crack growth. Journal of the Mechanics and Physics of Solids, vol. 54, no. 7, pp. 1333-1349. DOI: 10.1016/j.jmps.2006.01.007.
  • [30] Fu, D.L., Zhang, L. and Cheng, J. (2006). An energy-based approach for fatigue crack growth. Key Engineering Materials, vol. 324-325, pp. 379-382. DOI: 10.4028/www.scientific.net/KEM.324-325.379.
  • [31] Karakaş Ö. and Szusta, J. (2016). Monotonic and low cycle fatigue behaviour of 2024-T3 aluminium alloy between room temperature and 300°C for designing VAWT components. Fatigue & Fracture of Engineering Materials & Structures, vol. 39, no. 1, pp. 95-109. DOI: 10.1111/ffe.12336.
  • [32] Schreurs, P.J.G. (2012). Fracture Mechanics Background. In Stephen W. Freiman and John J. Mecholsky Jr. (Eds.) The Fracture of Brittle Materials: Testing and Analysis, Hoboken, NJ, USA: John Wiley & Sons, Inc., pp. 62-63.
  • [33] Beden, S.M., Abdullah, S., Ariffin, A.K. and Al-Asady, N.A. (2010). Fatigue crack growth simulation of aluminium alloy under spectrum loadings. Materials and Design, vol. 31, no. 7, pp. 3449-3456. DOI: 10.1016/j.matdes.2010.01.039.
  • [34] Dimitriu, R.C. and Bhadeshia, H.K.D.H. (2010). Fatigue crack growth rate model for metallic alloys. Materials and Design, vol. 31, pp. 2134-2139. DOI: 10.1016/j.matdes.2009.11.019.
  • [35] Kumar, S.M., Pramod, R., Kumar, M.E.S. and Govindaraju, H.K. (2014). Evaluation of fracture toughness and Mechanical Properties of Aluminum Alloy 7075, T6 with Nickel Coating. Procedia Engineering, vol. 97, pp. 178-185. DOI: 10.1016/j.proeng.2014.12.240.
  • [36] Noroozi, A.H., Glinka, G. and Lambert, S. (2008). Prediction of fatigue crack growth under constant amplitude loading and a single overload based on elasto-plastic crack tip stresses and strains. Engineering Fracture Mechanics, vol. 75, no. 2, pp. 188-206. DOI: 10.1016/j.engfracmech.2007.03.024.
  • [37] Shi, K., Cai, L. and Bao, C. (2014). Crack growth rate model under constant cyclic loading and effect of different singularity fields Procedia Materials Science, vol. 3, pp. 1566-1572. DOI: 10.1016/j.mspro.2014.06.253.
  • [38] Fatemi, A., Plaseied, A., Khosrovaneh, A.K. and Tanner, D. (2005). Application of bi-linear log-log S-N model to strain-controlled fatigue data of aluminum alloys and its effect on life predictions. International Journal of Fatigue, vol. 27, no. 9, pp. 1040-1050. DOI: 10.1016/j.ijfatigue.2005.03.003.
  • [39] Ribeiro, A.S., Borrego, L.P., De Jesus, A.M.P. and Costa, J.D.M. (2009). Comparison of the low-cycle fatigue properties betwee the 6082-T6 and 6061-T651 Aluminium Alloys. In 20th International Congress of Mechanical Engineering. November 15-20, Gramado, RS, Brazil.
  • [40] Han, J.W., Han, S.H., Shin, B.C. and Kim, J.H. (2012). Fatigue Crack Initiation and Propagation Life of Welded Joints. Key Engineering Materials, vol. 297-300, pp. 781-787. DOI: 10.4028///www.scientific.net/KEM.297-300.781.
  • [41] Mrowka, N.G., Sieniawski, J. and Nowotnik, A. (2009). Effect of heat treatment on tensile and fracture toughness properties of 6082 alloy. Journal of Acheivements in Materials and Manufacturing Engineering, vol. 32, no. 2, pp. 162-170.
  • [42] Pandey, K. and Chand, S. (2003). An energy based fatigue crack growth model. International Journal of Fatigue, vol. 25, no. 8, pp. 771-778. DOI: 10.1016/S0142-1123(03)00049-5.
  • [43] Noroozi, A., Glinka, G. and Lambert, S. (2007). A study of the stress ratio effects on fatigue crack growth using the unified two-parameter fatigue crack growth driving force. International Journal of Fatigue, vol. 29, no. 9-11, pp. 1616-1633. DOI: 10.1016/j.ijfatigue.2006.12.008.
  • [44] Radon, J.C. (1982). A model for fatigue crack growth in a threshold region. International Journal of Fatigue, vol. 4, no. 3, pp. 161-166. DOI: 10.1016/0142-1123(82)90044-5.
  • [45] Noroozi, A., Glinka, G. and Lambert, S. (2005). A two parameter driving force for fatigue crack growth analysis. International Journal of Fatigue, vol. 27, no. 10-12, pp. 1277-1296. DOI: 10.1016/j.ijfatigue.2005.07.002.
  • [46] Benachour, M., Benguediab, M. and Benachour, N. (2013). Notch fatigue crack initiation and propagation life under constant amplitude loading through residual stress field. Advanced Materials Research, vol. 682, pp. 17-24. DOI: 10.4028/www.scientific.net/AMR.682.17.
  • [47] Tschegg, S.E.S. and Mayer, H. (2001). Fatigue and fatigue crack growth of aluminium alloys at very high numbers of cycles. International Journal of Fatigue, vol. 23, pp. 231-237. DOI: 10.1016/S0142-1123(01)00167-0.
  • [48] Benachour, N., Hadjoui, A., Benachour, M. and Benguediab, M. (2011). Stress ratio and notch effect on fatigue crack initiation and propagation in 2024 Al-alloy. International Journal of Mechanical and Mechatronics Engineering, vol. 5, no. 7, pp. 1384-1387.
  • [49] Grasso, M., Iorio, A., Xu, Y., Haritos, G., Mohin, M. and Chen, Y.K. (2017). An analytical model for the identification of the threshold of stress intensity factor range for crack growth. Advances in Materials Science and Engineering, vol. 2017, 3014172. DOI: 10.1155/2017/3014172.
  • [50] Forth, S.C., Newman, J.C. and Forman, R.G. (2002). Generating fatigue crack growth thresholds with constant amplitude loads. Fatigue, pp. 1-8. https://ntrs.nasa.gov/api/citations/20030014136/downloads/20030014136.pdf
  • [51] Colin, J. (2010). Deformation history and load sequence effects on cumulative fatigue damage and life predictions. Thesis Doctor, University of Toledo Digital Repository.
  • [52] Anand, L. and Parks, D.M. (2004). Defect-Free Fatigue. Lecture notes distributed in the unit 2.002 Mechanics and Materials II. Massachusetts Institute of Technology Department of Mechanical Engineering Cambridge, Spring, pp. 1-37. https://ocw.mit.edu/courses/2-002-mechanics-and-materials-ii-spring-2004/resources/lec21_notes/
  • [53] Dowling, N.E. (2004). Mean Stress Effects in Stress-Life and Strain-Life Fatigue. In 2nd SAE Brasil International Conference on Fatigue. SAE Technical Paper 2004-01-2227. DOI: 10.4271/2004-01-2227.
  • [54] Wanhill, R.J.H. (2009). Characteristic stress intensity factor correlations of fatigue crack growth in high strength alloys: reviews and completion of NLR investigations 1985-1990. NLR-TP-2009-256. The Netherlands: National Aerospace Laboratory NLR.
  • [55] Musuva, J.K. and Radon, J.C. (2013). An elastic-plastic crack growth analysis using the J-integral concept.
  • [56] Tzamtzis, A. and Kermanidis, A.T. (2016). Fatigue crack growth prediction in 2xxx AA with friction stir weld HAZ properties. Frattura ed Integrità Strutturale, vol. 35, pp. 396-404. DOI: 10.3221/IGF-ESIS.35.45.
  • [57] Vikram, N. and Kumar, R. (2013). Review on fatigue-crack growth and finite element method. International Journal of Scientific & Engineering Research, vol. 4, no. 4, pp. 833-843.
  • [58] Chowdhury, P. and Sehitoglu, H. (2016). Mechanisms of fatigue crack growth - a critical digest of theoretical developments. Fatigue & Fracture of Engineering Materials & Structures, vol. 39, pp. 652-674, 2016. DOI: 10.1111/ffe.12392.
  • [59] Mann, T., Tveiten, B.W. and Härkegård, G. (2004). Fatigue of welded aluminium T-joints. In ESIS-ECF 15 Sweden, no. 1. From https://www.gruppofrattura.it/ocs/index.php/esis/ECF15/paper/viewFile/8703/4770
  • [60] Huang, X., Torgeir, M. and Cui, W. (2008). An engineering model of fatigue crack growth under variable amplitude loading. International Journal of Fatigue, vol. 30, no. 1, pp. 2-10. DOI: 10.1016/j.ijfatigue.2007.03.004.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-990f4752-cf94-4ac7-a46b-2794545fb75f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.