Synthesis of nano-structured duplex and ferritic stainless steel powders by dry milling and its comparison with wet milling

• Autorzy: Shashanka R. , Uzun Orhan , Chaira D.

Identyfikatory

DOI

10.24425/amm.2019.131091

• Języki publikacji: EN

Abstrakty

EN

In the present paper, elemental Fe, Cr and Ni powders were used to fabricate nano-structured duplex and ferritic stainless steel powders by using high energy planetary ball milling. We have studied the effect of milling atmosphere like wet (toluene) and dry (argon) milling of elemental Fe-18Cr-13Ni (duplex) and Fe-17Cr-1Ni (ferritic) powders for 10 h in a dual drive planetary mill. Stearic acid of 1wt.% was added during milling to avoid agglomeration. The dry and wet milled duplex and ferritic stainless steel powders were characterized by XRD, SEM and particle size analysis techniques. We have found that both the milling atmospheres have great influence in controlling the final particle morphology, size and phase evolution during milling. It was reported that dry milling is more effective in reducing particle size than the wet milling. The Nelson-Riley method of extrapolation was used to calculate the precise lattice parameter and Williamson-Hall method was used to calculate the crystallite size and lattice strain of both the stainless steel milled in argon atmosphere. Dry milled duplex and ferritic stainless steel were then consolidated by conventional sintering method at 1100, 1200 and 1300°C temperatures under argon atmosphere for 1 hour.

Słowa kluczowe

EN

powder metallurgy; dry milling; wet milling; planetary milling; stainless steel; sintering

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 1
• Strony: 5--14
• Opis fizyczny: Bibliogr. 47 poz., fot., rys., tab., wzory

Twórcy

autor

Shashanka R.

• Bartin University, Department of Metallurgical and Materials Engineering, Bartin-74100, Turkey

autor

Uzun Orhan

• Rectorate of Bartin University, Bartin-74100, Turkey

autor

Chaira D.

• National Institute of Technology, Department of Metallurgical and Materials Engineering, Rourkela-769008, India

Bibliografia

• [1] L. A. Dobrzanski, Z. Brytan, M. Actis Grande, M. Rosso, Arch. Mater. Sci. Eng. 28, 217-223 (2007).
• [2] S. Herenu, I. Alvarez-Armas, A. F. Armas, Scripta Mater. 45, 739-745 (2001).
• [3] H. Miyamoto, T. Mirnaki, S. Hashimoto, Mater. Sci. Eng. A. 319, 779-783 (2001).
• [4] M. J. Schofield, R. Bradsha, R. A. Cottis, Mater. Perform. 35, 65-70 (2009).
• [5] R. Shashanka, D. Chaira, Powder Technology. 278, 35-45 (2015).
• [6] K. J. Kurzydłowski, Bull. Pol. Acad. Sci. Tech. Sci. 52, 275 (2004).
• [7] Austral Wright Metals, Stainless Steel-Properties and Applications of Ferritic Grade Stainless Steel, Aug 31, 2008.
• [8] R. Shashanka, B. E. Kumara Swamy, S. Reddy, D. Chaira, Anal. Bioanal. Electrochem. 5, 455-466 (2013).
• [9] Sathish Reddy, B. E. Kumara Swamy, S. Arun, Mohan Kumar, R. Shashanka, H. Jayadevappa, Chemical Sensors. 2, 1-8 (2012).
• [10] C. Suryanarayana, Prog. Mater. Sci. 46, 1-184 (2001).
• [11] A. K. Nayak, R. Shashanka, D. Chaira, 5th National Conference on Processing and Characterization of Materials, IOP Conf. Series: Materials Science and Engineering, 115, 012008 (2016).
• [12] R. Shashanka, Anal. Bioanal. Electrochem. 10, 349-361 (2018).
• [13] R. Shashanka, International Journal of Scientific & Engineering Research. 8, 588-594 (2017).
• [14] Hye Jin Jung, Youngku Sohn, Hong Gye Sung, Hyung Soo Hyun, Weon Gyu Shin, Powder Technology. 269, 548-553 (2015).
• [15] Union Process, Planetary Ball Mills 101, Union Process, Inc. 1925 Akron-Peninsula Road, Akron, Ohio, Aug 21, 2017. https://www.unionprocess.com/planetary-ball-mill-basics.html
• [16] R. Shashanka, D. Chaira, Powder Technol. 259, 125-136 (2014).
• [17] I. Ismail, M. Hashim, K. A. Matori, R. Alias, J. Hassan, J. Magn. Magn. Mater. 323, 1470-1476 (2011).
• [18] R. Shashanka, D. Chaira, B. E. Kumara Swamy, Int. J. Electrochem. Sci. 10, 5586-5598 (2015).
• [19] R. Shashanka, D. Chaira, B. E. Kumara Swamy, International Journal of Scientific & Engineering Research. 6, 1863-1871 (2015).
• [20] R. Shashanka, D. Chaira, B. E. Kumara Swamy, International Journal of Scientific & Engineering Research. 7, 1275-1285 (2016).
• [21] R. Shashanka, D. Chaira, Mater Charact. 99, 220-229 (2015).
• [22] R. Shashanka, D. Chaira, D. Chakravarty, Journal of Materials Science and Engineering B. 6 (5-6), 111-125 (2016).
• [23] R. Shashanka, D. Chaira, Acta Metall. Sin. (Engl. Lett.) 29, 58-71 (2016).
• [24] R. Shashanka, D. Chaira, Tribology Transactions. 60, 324-336 (2017).
• [25] S. Pandya, K. S. Ramakrishna, A. R. Annamalai, A. Upadhyaya, Mater. Sci. Eng. A. 556, 271-277 (2012).
• [26] K. Vijayalakshmi, V. Muthupandi, R. Jayachitra, Mater. Sci. Eng. A. 529, 447-451 (2011).
• [27] P. Guiraldenq, O. H. Duparc, Metall. Res. Technol. 114, 613 (2017).
• [28] D. A. Huerta, Victor Sosa, M. C. Vargas, J. C. Ruiz-Suarez, Phys. Rev. E. 72, 031307 (2005).
• [29] Lauren Juliet Ayers, The hardening of type 316 L stainless steel welds with thermal aging, Massachusetts Institute of Technology, 2012.
• [30] B. D. Cullity, S. R. Stock, Elements of X-Ray diffraction, Pearson, 2003. (Paperback, ISBN-13: 9780131788183).
• [31] S. Gupta, R. Shashanka, D. Chaira, 4th National Conference on Processing and Characterization of Materials, IOP Conf. Series: Materials Science and Engineering. 75, 012033 (2015).
• [32] Q. Meng, N. Zhou, Y. Rong, S. Chen, T. Y. Hsu, Xu Zuyao, Acta. Mater. 50, 4563-4570 (2002).
• [33] M. H. Enayati, M. R. Bafandeh, J. Alloy. Compd. 454, 228-232 (2008).
• [34] T. Haghir, M. H. Abbasi, M. A. Golozar, M. Panjepour, Mater. Sci. Eng. A. 507, 144-148 (2009).
• [35] M. Wang, H. Sun, L. Zou, G. Zhang, S. Li, Z. Zhou, Powder. Technol. 272, 309-315 (2015).
• [36] F. Tehrani, M. H. Abbasi, M. A. Golozar, M. Panjepour, Mater. Sci. Eng. A. 528, 3961-3966 (2011).
• [37] E. Salahinejad, M. J. Hadianfard, M. Ghaffari, R. Amini, Sh. Bagheri Mashhadi, A. K. Okyay, Adv. Powder. Tech. 24, 605-608 (2013).
• [38] S. Noh, B. K., Choi, S. H. Kang, T. K. Kim, Nucl. Eng. Technol. 46, 857-862 (2014).
• [39] M. Gojic, A. Nagode, B. Kosec, S. Kozuh, S. Savli, T. Holjevac Grguric, L. Kosec, Eng. Fail. Anal. 18, 2330-2335 (2011).
• [40] R. Shashanka, D. Chaira, B. E. Kumara Swamy, Archives of Metallurgy and Materials. 63, 749-763 (2018).
• [41] Bhadeshia, H. K. D. Hansraj, Honeycombe, R. W. Kerr, Steels: Microstructure and Properties (3rd ed.), Butterworth-Heinemann, (2006). ISBN 978-0-7506-8084-4.
• [42] R. A. Ricks, G. S. Barritte, P. R. Howell, Proc. Int. Conf. on Solid-Solid Phase Transformations, Natural Science Foundation/Met. Soc. AIME 463-8 (1982).
• [43] I. Manika, J. Maniks, Acta Mater. 54, 2049-2056 (2006).
• [44] J. H. Gong, J. J. Wu, Z. D. Guan, J. Eur. Ceram. Soc. 19, 2625-2631 (1999).
• [45] H. Buckle, in: The Science of Hardness Testing and Its Research Application, ed. by J. H. Westbrook, H. Conrad, ASM, Metal Park, 453 (1973).
• [46] B. W. Mott, Micro-indentation Hardness Testing, Butterworths Scientific Publications, London, 1956.
• [47] H. Buckle, Metall. Rev. 4, 49-100 (1959)

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).