Analysis of suspension element of car body on the example silentblock

• Autorzy: Ziobro J.

Identyfikatory

DOI

10.12913/22998624/60799

• Języki publikacji: EN

Abstrakty

EN

The article presents a still important aspect of the construction and operation of the vehicle. The most loaded part of the suspension of a vehicle has been discussed, for example, rubber-metal bushing (silentblock). This component directly affects the safety and comfort of drive. It also presents the main varieties of construction and signs of usage of those elements. It has comprised of properties of the rubber and polyurethane bushings. Mechanical calculation of silentblock model has also been presented. 3D numerical analysis was carried out on the basis of the model by using two types of rubber bushings with different hardness. The results of simulations carried out in the system MSC.MARC has been shown. On these basis, there were selected and given numerous conclusions for utilitarian character.

Słowa kluczowe

EN

silentblock; rubber-metal bushing; rubber; FEM simulation

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2015
• Tom: Vol. 9, nr 28
• Strony: 125--129
• Opis fizyczny: Bibliogr. 11 poz., fig., tab.

Twórcy

autor

Ziobro J.

• Technical Institute, Jan Grodek State Vocational Academy in Sanok, Mickiewicza 21, 38-500 Sanok, Poland

Bibliografia

• 1. http://moto-naprawa.pl/wymiana-tulei-wahacza/ #more-40
• 2. http://autokult.pl/2876,tuleje-zawieszenia-maly-problem-a-meczy
• 3. http://mojafirma.infor.pl/moto/eksploatacja-auta/ zawieszenie/255834,Jak-wstepnie-rozpoznac-nad¬mierne-zuzycie-elementow-zawieszenia.html
• 4. https://www.ruville.com/fileadmin/user_upload/redaktion/pdfs/Technikbroschueren/PL/Querlen-kerbuchsen_polnisch.pdf
• 5. Bhowmick A.K. et al. (Ed.): Rubber product and manufacturing technology. Marcel Dekker, New York, USA 1994.
• 6. Gil-Negrate and Alonso (Eds.): Constitutive models for Rubber VIII. Taylor & Francis Group, London 2013, 163–196.
• 7. MSC.Software Corporation Introduction to MSC. Marc and Mentat. MAR101 Course Notes. Help, mar101.pdf.
• 8. MSC.Software Corporation. Nonlinear finite element analysis of elastomers. Technical Paper. Help, 103_elast_paper.pdf.
• 9. Ziobro J.: Analiza gumowej osłony przegubu napędowego pojazdu. Zeszyty Naukowe PWSZ Sanok, Nr 9, 2013, 167–175.
• 10. Ziobro J.: Multiaxial stress and strain analysis of the rubber based on the natural rubber NR. In: International Scientific Conference Pro-Tech-Ma‘13. OWPRz, Rzeszów 2013, 258–263.
• 11. Ziobro J., Marciniec A.: Metodyka projektowania form wtryskowych do elastomerów. OWPRz Rzeszów 2015.