An influence of Titanium Alloy Ti10V2Fe3Al Microstructure on the Electrodischarge Process Efficiency

• Autorzy: Żyra A. , Bogucki R. , Skoczypiec S.

Identyfikatory

DOI

10.24425/amm.2019.129487

• Języki publikacji: EN

Abstrakty

EN

In the work results of research on electrodischarge machining (EDM) of titanium alloy Ti10V2Fe3Al with (α + β) structure were presented. Preliminary heat treatment of samples allows to obtain different morphology and volume fraction of the α phase. The main goal of research was to assessment of the material microstructure impact on EDM technological factors (ie. material removal rate, tool wear) and morphology of technological surface layer. Electrodischarge machining is alternative and increasingly used method of titanium alloys machining. Research allowed to indicate the possibilities and limitations of use EDM in this area. It is especially important in the aspect of parts produced for aircraft industry and related requirements for the technological surface layer quality.

Słowa kluczowe

EN

electrodischarge machining; EDM; microstructure; Ti10V2Fe3Al alloy; Titanium Grade 2

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 3
• Strony: 1005--1010
• Opis fizyczny: Bibliogr. 22 poz., fot., rys., tab.

Twórcy

autor

Żyra A.

• Cracow University of Technology, Department of Mechanical Engineering, Institute of Production Engineering, Al. Jana Pawła II 37, 31-864, Kraków, Poland

autor

Bogucki R.

• Cracow University of Technology, Department of Mechanical Engineering, Institute of Materials Science, Al. Jana Pawła II 37, 31-864, Kraków, Poland

autor

Skoczypiec S.

• Cracow University of Technology, Department of Mechanical Engineering, Institute of Production Engineering, Al. Jana Pawła II 37, 31-864, Kraków, Poland

Bibliografia

• [1] T. W. Duerig, J. Albrecht, D. Richer, P. Fischer, Acta Metall. 30, 2161-2172 (1982)
• [2] R. Dąbrowski, Arch. Metal. Mater. 56, 217-221 (2011).
• [3] R. Dąbrowski, Arch. Metal. Mater. 56, 703-707 (2011).
• [4] G. LüterIng, J. C. Williams, Titanium, second ed., Springer, Berlin, 2007.
• [5] Z. Wyatt, S. Ankem, J. Mater. Sci. 45, 5022-5031 (2010).
• [6] C. Ouchi, H. Fukai, K. Hasegawa, Mater. Sci. Eng. A 263, 132-136 (1999).
• [7] T. Grosdidier, Y. Combress, E. Gautier, M. J. Philippe, Metall. Mater. Trans. A 31A, 1095-1106 (2000).
• [8] W. Xu, K. B. Kim, J. Das, M. Calin, J. Eckert, Scripta Mater. 54, 1943-1948 (2006).
• [9] R. Bogucki, K. Mosór, M. Nykiel, Arch. Metal. Mater. 59, 1269-1273 (2014).
• [10] C. Li, X. Wu, J. H. Chen, S. Vander Zwaag, Mater. Sci. Eng. A 528, 5854-5860 (2011).
• [11] W. Zębala, J. Gawlik, A. Matras, G. Struzikiewicz, Ł. Ślusarczyk, Precision Machining VII 581, 409-414 (2014).
• [12] B. B. Pradhan, M. Masanta, B. R. Sarkar, B. Bhattacharyya, International Journal of Advanced Manufacturing Technology 41, 11-12, 1094-1106 (2009).
• [13] Y. Zhang, Y. Liu, Y. Shen, R. Ji, Z. Li, C. Zheng, Journal of Materials Processing Technology 214, 5, 1052-1061 (2014).
• [14] M. Kunieda, B. Lauwers, K. P. Rajurkar, B. M. Schumacher, CIRP Annals - Manufacturing Technology 54, 2, 64-87 (2005).
• [15] A. Goodlet, P. Koshy, CIRP Annals-Manufacturing Technology 64, 1, 241-244, 2015.
• [16] F. Klocke, L. Hensgen, A. Klink, L. Ehle, A. Schwedt, Process, Procedia CIRP 42, 673-678 (2016).
• [17] A. Żyra, W. Bizoń, S. Skoczypiec, Primary Research On Dry Electrodischarge Machining With Additional Workpiece Cooling, no. 2.
• [18] A. Żyra, R. Bogucki, S. Skoczypiec, Technical Transactions no. Y. 114, 12, 231-242 (2017).
• [19] W. J. Zhang, B. V Reddy, S. C. Deevi 45, 645-651 (2001).
• [20] M. Zhang, Q. Zhang, G. Zhu, Q. Liu, J. Zhang, Effects of Some Process Procedia CIRP 42, 627-631 (2016).
• [21] P. Fonda, Z. Wang, K. Yamazaki, Y. Akutsu, Journal of Materials Processing Technology 202, 1-3, 583-589 (2008).
• [22] M.A.R. Khan, M. M. Rahman, International Journal of Advanced Manufacturing Technology 92, 1-4, 1-13 (2017).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).