Surface Imaging of Temperature – Research Method of Heat Transfer

• Autorzy: Szafran Krzysztof , Łusiak Tomasz , Jeziorek Łukasz , Korzec Izabela

Identyfikatory

DOI

10.12913/22998624/156944

• Języki publikacji: EN

Abstrakty

EN

The method does not differ in difficulty from the standard surface temperature imaging method, which is its unquestionable advantage. The disadvantage is the need to use test models made of materials transmitting visible light in the full range (blue light for excitation and red as a recorded result), which, with more complex shapes, makes the model more expensive. Nevertheless, the presented method is a valuable supplement to the set of methods and techniques used so far for imaging temperature fields and estimating the heat flux in the steady state.

Słowa kluczowe

EN

heat transfer; temperature; surface imaging

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2023
• Tom: Vol. 17, no 1
• Strony: 243--251
• Opis fizyczny: Bibliogr. 19 poz., rys.

Twórcy

autor

Szafran Krzysztof

• Łukasiewicz Research Network – Instytut Lotnictwa, al. Krakowska 110/114, 02-256 Warsaw, Poland

• https://orcid.org/0000-0003-3974-1466

autor

Łusiak Tomasz

• Lublin University of Technology, ul. Nadbystrzycka 38D, 20-618 Lublin, Poland

• https://orcid.org/0000-0003-2324-4596

autor

Jeziorek Łukasz

• Łukasiewicz Research Network – Instytut Lotnictwa, al. Krakowska 110/114, 02-256 Warsaw, Poland

• https://orcid.org/0000-0002-0603-9219

autor

Korzec Izabela

• Lublin University of Technology, ul. Nadbystrzycka 38D, 20-618 Lublin, Poland

• https://orcid.org/0000-0002-7984-5174

Bibliografia

• 1. Jahanmiri M. 2011. Pressure Sensitive Paints: The Basics & Applications.
• 2. Sullivan J. 2009. Molecular Sensors – Temperature Sensitive Paint, https://slideplayer.com/slide/1675994/
• 3. Schramm J.M., Hannemann K., Ozawa H., Beck W. Development of temperature sensitive paints for the high enthalpy shock tunnel Goettingen. In: 8th European Symposium on Aerothermodynamics for Space Vehicles, Lissabon; 2014.
• 4. Wright L.M., Gao Z., Varvel T.A., Han J.C. Assessment of steady state PSP, TSP, and IR measurement techniques for flat plate film cooling. Heat Transfer AMSE 2005; 3: 37–46.
• 5. Cottingham T. Characterization and optimization of temperature-sensitive microbeads for simultaneous thermometry and velocimetry for fluid dynamic applications. M.Sc. thesis, University of Washington; 2015.
• 6. Bell J.H. Applications of pressure-sensitive paint to testing at very low flow speeds, AIAA-2004–0878; 2004.
• 7. Liu Q. Study of heat transfer characteristics if impinging air jet using pressure and temperature sensitive luminescent paint. Ph.D. thesis, Nanjing University of Aeronautics and Astronautics; 1993.
• 8. Jeziorek Ł. Efektywność wymiany ciepła na powierzchni płyt i szczelin w aspekcie jednodetektorowego, obustronnego pomiaru temperatury za pomocą farby termoczułej. Ph.D. thesis, Institute of Aviation, Warsaw; 2019.
• 9. Szafran K., Pągowski Z.T. Selection of propulsion unit for a new class of transport hovercraft as a compromise between technical performance and purchase and exploitation costs. Journal of KONES 2016: 519–524
• 10. Crafton J., Ladchenko N., Guille M., Sullivan P. Application of temperature and pressure sensitive paint to an obliquely impinging jet. In: 37th Aerospace Sciences Meeting and Exhibit, AIAA-99–0387, Reno, USA; 1999.
• 11. Gauntner J.W., Livingood J.N., Hrycak P. 1970. Survey of Literature on Flow characteristics of a Single turbulent Jet Impinging on a Flat Plate. NASA Technical Note, NASA TN D-5652.
• 12. Hrycak P. Heat transfer from impinging jets – a literature review. Report of New Jersey Institute of Technology AFWAL-TR-81–3054,, Newark, New Jersey, USA; 1981.
• 13. Behnia M., Parneix S., Durbin P. Simulation of jetimpingement heat transfer with the k-ε-v2 model. Annual research Briefs, Center for Turbulence Research; 1996.
• 14. Spring S. Numerical prediction of jet impingement heat ransfer. Ph.D. thesis, Institute of Aerospace Thermodynamics, Stuttgart University, Germany; 2010.
• 15. Zuckerman N., Lior N. Jet impingement heat transfer: physics, correlations and numerical modeling. Advances in Heat Transfer 2006; 39: 565–631.
• 16. Sharma S., Kumar R. Experimental investigation on heat transfer characteristics from liquid jet impingement to different flat plates. International Journal for Innovative Research in Science & Technology 2015; 1(12).
• 17. Szafran K., Jeziorek Ł., Widera P., Skalski P. Pomiar przepływu ciepła przy wykorzystaniu farby termoczułej. Autobusy–Technika, Eksploatacja, Systemy Transportowe 2018; 226(12): 424–427.
• 18. Domański R. Wymiana Ciepła, Wykorzystanie programu MathCad do obliczeń procesów wymiany ciepła. Biblioteka Naukowa Instytutu Lotnictwa nr. 47, Warszawa; 2016.
• 19. Szafran K., Jeziorek Ł., Skalski P. 2018. Heat transfer determined by the temperature sensitive paint method. Transactions on aerospace research 2018; 4(253): 57–70. DOI: 10.2478/TAR-2018–0029

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).