Photogrammetry-Aided Study of the Accuracy and Repeatability of a Modular System for Manufacturing Shelf Ready Packaging

• Autorzy: Jakubowicz Michał , Wieczorowski Michał , Gapiński Bartosz , Swojak Natalia , Rogiewicz Filip , Jermak Czesław

Identyfikatory

DOI

10.12913/22998624/188584

• Języki publikacji: EN

Abstrakty

EN

The paper presents an analysis of the influence of the Shelf Ready Packaging (SRP) machine performance parameters on the repeatability of generated cardboard boxes’ selected geometric features. As part of the research, two batches of packaging were measured. Each batch contained 100 pieces of packaging, manufactured either at a rate of 15 pcs/min or 20 pcs/min, 50 pcs each. Both batches were measured using Creaform’s Academia scanner using VXelements 6.2 software. The results were analyzed using GOM Inspect programming. In the first stage, the geometric repeatability of the products was analyzed on the basis of two selected critical features, which were considered to be the internal length and width of the cardboard packaging. These features are responsible for the proper efficiency of the packaging and the possibility of combining cartons during transportation. The results obtained were subjected to statistical analysis. In the second stage of the research, an analysis of surface deviation maps was carried out against a reference element. Our findings allow it to be concluded that increasing the production output of carton packaging (from 15 to 20 pcs/min) did not negatively affect the dimensional accuracy and repeatability of the process. It was also found that the shortening of packaging production time by increasing productivity had a positive effect on the stability of the manufacturing process of hot-glued SRP packaging.

Słowa kluczowe

EN

coordinate measuring technique; photogrammetry; repeatability

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2024
• Tom: Vol. 18, no 4
• Strony: 111--127
• Opis fizyczny: Bibliogr. 31 poz., fig., tab.

Twórcy

autor

Jakubowicz Michał

• Faculty of Mechanical Engineering, Poznan University of Technology, plac M. Skłodowska-Curie 5, 60-965 Poznań, Poland

• https://orcid.org/0000-0002-6350-0411

autor

Wieczorowski Michał

• Faculty of Mechanical Engineering, Poznan University of Technology, plac M. Skłodowska-Curie 5, 60-965 Poznań, Poland

• https://orcid.org/0000-0001-7526-8368

autor

Gapiński Bartosz

• Faculty of Mechanical Engineering, Poznan University of Technology, plac M. Skłodowska-Curie 5, 60-965 Poznań, Poland

• https://orcid.org/0000-0003-0206-1942

autor

Swojak Natalia

• Faculty of Mechanical Engineering, Poznan University of Technology, plac M. Skłodowska-Curie 5, 60-965 Poznań, Poland

• https://orcid.org/0000-0003-2861-2693

autor

Rogiewicz Filip

• PROTiM Sp. z o. o., ul. Grzybowa 8D, 62-081 Wysogotowo, Poland

autor

Jermak Czesław

• PROTiM Sp. z o. o., ul. Grzybowa 8D, 62-081 Wysogotowo, Poland

Bibliografia

• 1. ECR Europe. Shelf Ready Packaging (Retail Ready Packaging), Addressing the challenge: a comprehensive guide for a collaborative approach, 2006, https://www.ecr.digital/wp_contents/uploads/2016/09/ECR-Bericht_Shelf_Ready_Packaging.pdf, (Accessed: 12.03.2024).
• 2. Emblem A., Emblem H. Packaging technology: fundamentals, materials and processes. Cambridge: Woodhead Publishing, 2012.
• 3. Lisińska-Kuśnierz M., Kawecka A. The role of packaging supply chain in food packaging safety assurance. Logistics and Transport, 2013, 19: 37–44.
• 4. Tarnowicka M., Wymagania dla opakowań gotowych na półkę (SRP – Shelf Ready Packaging) do towarów konsumpcyjnych szybko rotujących, PhD thesis, Poznań University of Economics, 2009 (in Polish).
• 5. Kotzab, H., El-Jafli, S. The Role of Instore Logistics and Shelf Ready Packaging for On-Shelf Availability. In: Dethloff, J., Haasis, HD., Kopfer, H., Kotzab, H., Schönberger, J. (eds) Logistics management. lecture notes in logistics. Springer, Cham, 2015 https://doi.org/10.1007/978-3-319-13177-1_32.
• 6. Gustafsson K., Jonson G., Smith D., Sparks L. Retailing Logistics & Fresh Food Packaging: Managing Change in the Supply Chain, Kogan Page Limited, The Chartered Institute of Logistics and Transport, London, 2009.
• 7. Cholewa-Wójcik A., Kawecka A. Packaging Quality Assurance In Supply Chain, Proceedings of The 14th International Scientific Conference Business Logistics in Modern Management, 2014, 14: 103–108.
• 8. Cholewa-Wójcik A. Role of packaging in the effective implementation of the flow in the supply chain. Problemy Jakości/Problem of quality, 2017, 9: 45–49.
• 9. Tichoniuk M., The potential of smart packaging in supply chain risk management, towaroznawcze problemy jakości. Polish Journal of Commodity Science, 2021, 67(2): 65–74.
• 10. Barczewski R. Short time vibration analysis and parameterisation as a tool for machine prototypes testing, Vibrations in Physical Systems, 2020, 31(1): 2020112, https://doi.org/10.21008/j.0860-6897.2020.1.12.
• 11. Jakubek B., Barczewski R. Determination of the sound power level of modular machines with cyclic operation mode – case study, Vibrations in Physical Systems, 2020, 31(1): 2020101, https://doi.org/10.21008/j.0860-6897.2020.1.01.
• 12. Alam A.U., Rathi P., Beshai H., Sarabha G.K., Deen M.J. Fruit quality monitoring with smart packaging, Sensors, 2021, 21: 1509, https://doi.org/10.3390/s21041509.
• 13. Harding K. Handbook of Optical Dimensional Metrology, CRP Press, 2013.
• 14. Luhmann T., Robson S., Kyle S., Harley I. Close range photogrammetry: principles, techniques and applications, Whittles Publishing, Dunbeath, Scotland, 2006.
• 15. Kiraci E., Attridge A., Williams M.A. The use of laser scanning technology to improve the design process, Applied Mechanics and Materials, 2011, 110–116: 4118–4122, https://doi.org/10.4028/www.scientific.net/AMM.110-116.4118.
• 16. Kuş A. Implementation of 3D optical scanning technology for automotive applications, Sensors, 2009, 9(3), 1967–1979. https://doi.org/10.3390/s90301967
• 17. Liu T., Burner A. W., Jones t. W., Barrows D. A. Photogrammetric techniques for aerospace applications, Progress in Aerospace Sciences, 2012, 54: 1–58, 18. https://doi.org/10.1016/j.paerosci.2012.03.002.
• 19. Tyson, J. Optical 3D Deformation and Strain Measurement. In: Davies, M., Lumsden, A., Kline, W., Kakadiaris, I. (eds) Pumps and pipes. Springer, Boston, MA. 2011, https://doi.org/10.1007/978-1-4419-6012-2_13.
• 20. Rękas A., Kaczmarek T., Wieczorowski M., apiński B., Jakubowicz M., Grochalski K., Kucharski D., Marciniak-Podsadna L. Analysis of tool geometry for the stamping process of large‐size car body components using a 3D optical measurement system, MDPI Materials, 2021, 14(24): 7608. https://doi.org/10.3390/ma14247608.
• 21. Haleem A., Javaid M., Goyal A., Khanam T. Redesign of car body by reverse engineering technique using Steinbichler 3D scanner and projet 3D printer, Journal of Industrial Integration and Management, 2022, 7(2): 171–182, https://doi.org/10.1142/S2424862220500074.
• 22. Gahleitner R., Niel K.S., Frank S. Optical measurement system for characterizing plastic surfaces. Proc. SPIE 6813, Image Processing: Machine Vision Applications, 2008, https://doi.org/10.1117/12.766311
• 23. Wieczorowski M., Gapiński B., Grzelka M., Szostak M., Szymański M. The use of photogrammetry in improving quality of workpieces after an injection molding process. Polymers 2018, 63(2): 134–144, https://doi.org/10.14314/polimery.2018.2.7.
• 24. Catalucci S., Senin N., Sims-Waterhouse D., Ziegelmeier S., Piano S., Leach R. Measurement of complex freeform additively manufactured parts by structured light and photogrammetry. Measurement 2020, 164: 108081, https://doi.org/10.1016/j.measurement.2020.108081 25. Wieczorowski M., Yago I.P., Alejandro P.D., Gapiński B., Budzik G., Diering M. Comparison of measurements realized on computed tomography and optical scanners for elements manufactured by wire arc additive manufacturing. In Lecture Notes in Mechanical Engineering 2022, 127–141, https://doi.org/10.1007/978-3-031-03925-6_12.
• 26. Gapiński B., Wieczorowski M., Marciniak-Podsadna L., Swojak N., Mendak M., Kucharski D., Szelewski M., Krawczyk A. Use of white light and laser 3D scanners for measurement of mesoscale surface asperities. In Lecture Notes in Mechanical Engineering, 2019, 239–256, https://doi.org/10.1007/978-3-030-18682-1_19.
• 27. Böröcz P. Measurement and analysis of deformation shapes on corrugated cardboard logistical boxes under static and dynamic compression, Acta Technica Jaurinensis, 2015, 8(4): 320–329, https://doi.org/10.14513/actatechjaur.v8.n4.389.
• 28. Company information materials PROTiM Sp. z o.o. https://www.protim.pl/oferta/kartoniarki-formierki/formierka-pozioma-ftht6, (Accessed: 02.02.2024).
• 29. Company information materials Creaform, available at: https://www.creaform3d.com/en; (Accessed: 02.01.2024).
• 30. Bell S., Measurement Good Practice Guide. A beginner’s guide to uncertainty of measurement, National Physical Laboratory Teddington, Middlesex, United Kingdom, 1999, 1(2).
• 31. Dietrich E., Schultze A. Statistical Procedures for Machine and Process Qualification, 1st ed.; Hanser Publications: Munich, Germany, 2010.