Dynamic and mathematical models of the hydroimpulsive vibro-cutting device with a pressure pulse generator bult into the ring spring

• Autorzy: Obertyukh Roman , Slabkyі Andrii , Polishchuk Leonid , Povstianoi Oleksandr , Kumargazhanova Saule , Satymbekov Maxatbek

Identyfikatory

DOI

10.35784/iapgos.3049

Warianty tytułu

PL

Modele dynamiczne i matematyczne hydraulicznego urządzenia impulsowego do cięcia wibracyjnego z generatorem impulsów wbudowanym wsprężynę pierścieniową

• Języki publikacji: EN

Abstrakty

EN

Structural calculation scheme of the hydropulse device for vibration cutting with built-in ring with pressure pulse generator (PPG) is considered. On the basis of the structural scheme and cyclogram of the working cycle of the device, its dynamic and mathematical models were developed, in whichthe hydraulic link is represented by a visco-elastic model of the working fluid (energy carrier) composed of the inertial elastic and dissipative elements (Kelvin-Foyga's body).

PL

Rozważa się schemat konstrukcyjny i projektowy hydraulicznego urządzenia impulsowego do cięcia wibracyjnego z wbudowanym generatorem impulsów ciśnieniowych ze sprężyną pierścieniową (PPG). Na podstawie schematu strukturalnego i cyklu pracy urządzenia opracowano jego modele dynamiczne i matematyczne, w których ogniwo hydrauliczne reprezentowane jest przez lepkosprężysty model cieczy roboczej (nośnika energii), złożony z bezwładnych elementów sprężystych i dyssypacyjnych (ciał Kelvina-Foiga).

Słowa kluczowe

EN

mathematical model; dynamic model; hydropulper device; ring spring; frequency; amplitude

PL

model matematyczny; model dynamiczny; hydrauliczne urządzenie impulsowe; sprężyna pierścieniowa; częstotliwość; amplituda

• Wydawca: Wydawnictwo Politechniki Lubelskiej
• Czasopismo: Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
• Rocznik: 2022
• Tom: T. 12, nr 3
• Strony: 54--58
• Opis fizyczny: Bibliogr. 21 poz., rys.

Twórcy

autor

Obertyukh Roman

• Vinnytsia National Technical University, Vinnytsia, Ukraine

• https://orcid.org/0000-0003-2939-6582

autor

Slabkyі Andrii

• Vinnytsia National Technical University, Vinnytsia, Ukraine

• https://orcid.org/0000-0001-9284-2296

autor

Polishchuk Leonid

• Vinnytsia National Technical University, Vinnytsia, Ukraine

• https://orcid.org/0000-0002-5916-2413

autor

Povstianoi Oleksandr

• Lutsk National Technical University, Lutsk,Ukraine

• https://orcid.org/0000-0002-1416-225X

autor

Kumargazhanova Saule

• D. Serikbayev East Kazakhstan Technical University,Ust-Kamenogorsk, Kazakhstan

• https://orcid.org/0000-0002-6744-4023

autor

Satymbekov Maxatbek

• Al-Farabi Kazakh National University, Almaty, Kazachstan

• https://orcid.org/0000-0002-4621-6646+

Bibliografia

• [1] Abramov E. I. et al.: Elements of the hydraulic drive: reference book. Technics, Kiev 1977.
• [2] Berezyuk O. V.: Mathematical modeling of the hydraulic drive dynamics of the working bodies of the container reversal during the loading of solid household waste in the garbage truck. Bulletin of Khmelnytsky National University 5, 2013.
• [3] Bocharov Yu. A.: Fundamentals of the general theory of hydraulic forgestamping machines. Machinery and technology of metal processing by pressure. Collection of scientific works MVTU 330, 1980, 12–40.
• [4] Chuprakov Yu. I.: Hydraulic actuator and means of hydraulics. Engineering 1979.
• [5] Cieplok G.: Estimation of the resonance amplitude in machines with inertia vibrator in the coast-down phase. Mechanics & Industry 19(102), 2018.
• [6] Danilchik S. S.: Vibration turning of structural steels. BNTU, Minsk 2018.
• [7] Gursky V. et al.: Dynamic Analysis of an Enhanced Multi‐Frequency Inertial Exciter for Industrial Vibrating Machines. Machines 10(130), 2022 [http://doi.org/10.3390/machines10020130].
• [8] Iskovich-Lototskiy R. D. et al.: Pressure pulse generators for controlling the hydropulse drives of vibratory and vibration damping technological machines. UNIVERSUM, Vinnitsya 2008.
• [9] Iskovich-Lototskiy R. D. et al.: Vibration and vibro-shock machines. Technics, Kiev 1982.
• [10] Khmara L. A. et al.: Algorithm to calculate work tools of machines for performance in extreme working conditions. Mechatronic Systems I. Applicationsin Transport, Logistics, Diagnostics and Control. Taylor & Francis Group – CRC Press, New York 2021, 29–38.
• [11] Kozlov L. et al.: Optimization of design parameters of a counterbalance valve for a hydraulic drive invariant to reversal loads. Mechatronic Systems I. Applications in Transport, Logistics, Diagnostics and Control. Taylor & Francis Group –CRC Press, New York 2021, 137–148.
• [12] Kozlov L. G. et al.: Experimental research characteristics of counterbalance valve for hydraulic drive control system of mobile machine. Przegląd Elektrotechniczny 95(4), 2019, 104–109.
• [13] Obertyukh R. et al.: Mathematical Modeling of the Device for Radial Vibroturning. Advanced Manufacturing Processes II. Inter Partner, Springer, Cham. 2020 [http://doi.org/10.1007/978-3-030-68014-5_55].
• [14] Obertyukh R. et al.: Method of design calculation of a hydropulse device for strain hardening of materials. Przegląd Elektrotechniczny 4, 2019, 65–73.
• [15] Obertyukh R. R. et al.: Dynamic and mathematical models of the hydraulicpulse device for deformation strengthening of materials. Proc. 10808, 2018.
• [16] Obertyukh R. R. et al.: Pat No 76517 Ukraine, IPC (2013, 01) В23В 1/00. Hydropulse vibrationshock device for radial and axial vibration turning with integrated pulse generator type pressure valve. Applicant and owner of the Vinnytsia National Technical University. 10.01.2013. Bull No. 1.
• [17] Polishchuk L. et al.: Mechatronic Systems II. Applications in Material Handling Processes and Robotics. Taylor & Francis Group – CRC Press, Boca Raton, London, New York, Leiden 2021.
• [18] Ponomarev S. D., Andreeva L. E.: Calculation of elastic elements of machines and instruments. Machine-building, Moscow 1980.
• [19] Roganov L. L., Karnaukh S. G.: Calculation of springs and elastic shock absorbers. DSEA, Kramatorsk 2000.
• [20] Song T.: Rapid Calculation and Optimization of Vibration and Noise of Permanent-Magnet Synchronous Motors for EVs Based on Equivalent Structural Network. Machines 10(4), 2022, 281 [http://doi.org/10.3390/machines10040281].
• [21] Wójcik W. et al.: Mechatronic Systems I. Applications in Transport, Logistics, Diagnostics and Control. Taylor & Francis Group –CRC Press, London, New York 2021 [http://doi.org/10.1201/9781003224136].

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).