Application of cored wire injection method to the producing of vermicular cast iron

• Autorzy: Guzik E. , Kleingartner T.
• Języki publikacji: EN

Abstrakty

EN

The results of studies on the use of magnesium alloy in modern cored wire injection method for production of vermicular graphite cast irons were described. The injection of Mg cored wire length is a treatment method which can be used to process iron melted in an electric induction furnace. This paper describes the results of using a high-magnesium ferrosilicon alloy in cored wire (Mg recovery 45% ) for the production of vermicular graphite cast irons at Giesserei Heunisch GmbH Foundry. The results of calculations and experiments have indicated the length of the cored wire to be injected basing on the initial sulfur content and weight of the treated melt. The paper presents a microstructure matrix and vermicular graphite in standard sample and different walled castings. The results of numerous trials have shown that the magnesium cored wire process can produce high quality vermicular graphite irons under the specific industrial conditions of the above mentioned foundries.

Słowa kluczowe

EN

vermicular cast iron; PE method; cored wire; air conditioner box

PL

żeliwo wermikularne; drut rdzeniowy; klimatyzator

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2008
• Tom: Vol. 8, iss. 1 spec.
• Strony: 127--130
• Opis fizyczny: Bibliogr. 1 poz., rys., tab.

Twórcy

autor

Guzik E.

• University of Science and Technology, Reymonta 23, 30-059 Kraków, Poland

autor

Kleingartner T.

• Giesserei Heunisch GmbH, Hofmannstrasse 25, Bad Windsheim, Germany

Bibliografia

• [1] E. Guzik, Some selected problems concerning the processes of cast iron improvement, Archives of Foundry, PAN - Katowice, 2001, Monograph, No IM, pp. 128.