PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A review of the importance of synchrophasor technology, smart grid, and applications

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The electrical network is a man-made complex network that makes it difficult to monitor and control the power system with traditional monitoring devices. Traditional devices have some limitations in real-time synchronization monitoring which leads to unwanted behavior and causes new challenges in the operation and control of the power systems. A Phasor measurement unit (PMU) is an advanced metering device that provides an accurate real-time and synchronized measurement of the voltage and current waveforms of the buses in which the PMU devices are directly connected in the grid station. The device is connected to the busbars of the power grid in the electrical distribution and transmission systems and provides time-synchronized measurement with the help of the Global Positioning System (GPS). However, the implementation and maintenance cost of the device is not bearable for the electrical utilities. Therefore, in recent work, many optimization approaches have been developed to overcome optimal placement of PMU problems to reduce the overall cost by providing complete electrical network observability with a minimal number of PMUs. This research paper reviews the importance of PMU for the modern electrical power system, the architecture of PMU, the differences between PMU, micro-PMU, SCADA, and smart grid (SG) relation with PMU, the sinusoidal waveform, and its phasor representation, and finally a list of PMU applications. The applications of PMU are widely involved in the operation of power systems ranging from power system control and monitor, distribution grid control, load shedding control and analyses, and state estimation which shows the importance of PMU for the modern world.
Rocznik
Strony
art. no. e143826
Opis fizyczny
Bibliogr. 54 poz., rys., tab.
Twórcy
autor
  • Department of Electrical and Electronics Engineering Universiti Teknologi Petronas, Malaysia
  • Department of Electrical and Electronics Engineering Universiti Teknologi Petronas, Malaysia
autor
  • Department of Electronics and Computer Systems Engineering (ECSE), Cardiff School of Technologies, Cardiff Metropolitan University, United Kingdom
  • Faculty of Electrical and Computer Engineering, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland
  • Department of Electrical and Electronics Engineering Universiti Teknologi Petronas, Malaysia
  • Department of Electrical and Electronics Engineering Universiti Teknologi Petronas, Malaysia
  • College of Engineering, Electrical Engineering Department, Najran University, Saudi Arabia
  • Department of Electrical and Electronics Engineering Universiti Teknologi Petronas, Malaysia
autor
  • Laboratorio di Macchine e Azionamenti Elettrici, Dipartmento di Ingegneria Elettrica, Universita Degli Studi di Roma, 00185 Rome, Italy
  • Department of Electrical Engineering CECOS University of Information Technology and Emerging Sciences, Pakistan
Bibliografia
  • [1] M.K. Penshanwar, M. Gavande, and M.F.A.R. Satarkar, “Phasor Measurement unit technology and its applications-a review,” Int. Conf. Energy Syst. Appl. ICESA 2015, 2016, pp. 318–323, doi: 10.1109/ICESA.2015.7503363.
  • [2] M. Hojabri, U. Dersch, A. Papaemmanouil, and P. Bosshart, “A comprehensive survey on phasor measurement unit applications in distribution systems,” Energies, vol. 12, no. 23, pp. 1–23, 2019, doi: 10.3390/en12234552.
  • [3] M. Baba, N.B.M. Nor, T.B. Ibrahim, and M.A. Sheikh, “A comprehensive review for optimal placement of phasor measurement unit for network observability,” Indones. J. Electr. Eng. Comput. Sci., vol. 19, no. 1, pp. 301–308, 2020, doi: 10.11591/ijeecs.v19.i1.pp301-308.
  • [4] N. American and S. Initiative, “NASPI 2014 survey of synchrophasor system networks – results and findings,” NASPI Technical Report, July 2015.
  • [5] A. von Meier and R. Arghandeh, “Chapter 32 – Every Moment Counts: Synchrophasors for Distribution Networks with Variable Resources,” in Renewable Energy Integration (Second Edition), Second Edition., L.E. Jones, Ed. Boston: Academic Press, 2017, pp. 435–444, doi: 10.1016/B978-0-12-809592-8.00032-9.
  • [6] C. Huang et al., “Data quality issues for synchrophasor applications Part I: a review,” J. Mod. Power Syst. Clean Energy, vol. 4, no. 3, pp. 342–352, 2016, doi: 10.1007/s40565-016-0217-4.
  • [7] H. Manoharan, Y. Teekaraman, I. Kirpichnikova, R. Kuppusamy, S. Nikolovski, and H.R. Baghaee, “Smart grid monitoring by wireless sensors using binary logistic regression,” Energies, vol. 13, no. 15, p. 3974, 2020, doi: 10.3390/en13153974.
  • [8] R. Kumar, R. Kannan, N.S.S. Singh, G.E.M. Abro, N. Mathur, and M. Baba, “An Efficient Design of High Step-Up Switched Z-Source (HS-SZSC) DC-DC Converter for Grid-Connected Inverters,” Electronics, vol. 11, no. 15, p. 2440, 2022, doi: 10.3390/electronics11152440.
  • [9] D. Wang, X. Wang, Y. Zhang, and L. Jin, “Detection of power grid disturbances and cyber-attacks based on machine learning,” J. Inf. Secur. Appl., vol. 46, pp. 42–52, 2019, doi: 10.1016/j.jisa.2019.02.008.
  • [10] A. Shahsavari, M. Farajollahi, E.M. Stewart, E. Cortez, and H. Mohsenian-Rad, “Situational Awareness in Distribution Grid Using Micro-PMU Data: A Machine Learning Approach,” IEEE Trans. Smart Grid, vol. 10, no. 6, pp. 6167–6177, 2019, doi: 10.1109/TSG.2019.2898676.
  • [11] A. Shahsavari et al., “A data-driven analysis of capacitor bank operation at a distribution feeder using micro-PMU data,” 2017 IEEE Power Energy Soc. Innov. Smart Grid Technol. Conf. ISGT 2017, 2017, pp. 1–5, doi: 10.1109/ISGT.2017.8085984.
  • [12] A. Shahsavari et al., “Autopsy on active distribution networks: A data-driven fault analysis using micro-PMU data,” 2017 North Am. Power Symp. NAPS 2017, 2017, doi: 10.1109/NAPS.2017.8107265.
  • [13] A. Shahsavari, M. Farajollahi, E. Stewart, C. Roberts, and H. Mohsenian-Rad, “A data-driven analysis of lightning-initiated contingencies at a distribution grid with a PV farm using Micro-PMU data,” 2017 North Am. Power Symp. NAPS 2017, 2017, doi: 10.1109/NAPS.2017.8107307.
  • [14] M. Baba et al., “Optimization of Phasor measurement unit placement using several proposed case factors for power network monitoring,” Energies, vol. 14, no. 18, p. 5596, 2021, doi: 10.3390/en14185596.
  • [15] M. Baba, N.B.M. Nor, M.A. Sheikh, A.M. Baba, M. Rehman, and S.H.A. Shah, “A Hybrid Algorithm For Optimal PMU Placement,” Int. Conf. Intell. Adv. Syst. Enhanc. Present a Sustain. Futur. ICIAS 2021, 2021, doi: 10.1109/ ICIAS49414.2021.9642407.
  • [16] S.R. Samantaray, I. Kamwa, and G. Joos, “Phasor measurement unit based wide-area monitoring and information sharing between micro-grids,” IET Gener. Transm. Distrib., vol. 11, no. 5, pp. 1293–1302, 2017, doi: 10.1049/iet-gtd.2016.1419.
  • [17] M. Baba, N.B.M. Nor, M.A. Sheikh, M. Irfan, and M. Tahir, “A strategic and significant method for the optimal placement of phasor measurement unit for power system network,” Symmetry, vol. 12, no. 7, p. 1174, 2020, doi: 10.3390/sym12071174.
  • [18] F. Aminifar, A. Khodaei, M. Fotuhi-Firuzabad, and M. Shahidehpour, “Contingency-constrained PMU placement in power networks,” IEEE Trans. Power Syst., vol. 25, no. 1, pp. 516–523, 2010, doi: 10.1109/TPWRS.2009.2036470.
  • [19] S. Akhlaghi, “Optimal PMU placement considering contingency-constraints for power system observability and measurement redundancy,” 2016 IEEE Power Energy Conf. Illinois, PECI 2016, pp. 1–7, 2016, doi: 10.1109/PECI.2016.7459251.
  • [20] N.P. Theodorakatos, “Application of synchronized phasor measurements units in power systems,” Int. J. Eng. Sci., vol. 6, no. 3, pp. 25–39, 2017, doi: 10.9790/1813-0603012539.
  • [21] N.P. Theodorakatos, N.M. Manousakis and G.N. Korres, “Optimal placement of PMUS in power systems using binary integer programming and genetic algorithm,” MedPower 2014, 2014, pp. 1-6, doi: 10.1049/cp.2014.1656.
  • [22] K.S. Tan and R.K. Hester, “Design considerations for highfrequency continuous-time filters and implementation of an antialiasing filter for digital video,” IEEE J. Solid-State Circuits, vol. 25, no. 6, pp. 1368–1378, 1990, doi: 10.1109/4.62164.
  • [23] R. Baines, “The DSP bottleneck,” Softw. Radio Technol. Sel. Readings, vol. 17, no. 4, pp. 154–162, 2001, doi: 10.1109/9780470546444.ch2.
  • [24] M. Kayton, “Global positioning system: signals, measurements, and performance [Book Review],” IEEE Aerosp. Electron. Syst. Mag., vol. 17, no. 10, pp. 36–37, 2005, doi: 10.1109/maes.2002.1044515.
  • [25] H.T. McAleer, “A New Look at the Phase-Locked Oscillator,” Proceedings of the IRE, vol. 47, no. 6, pp. 1137–1143, June 1959, doi: 10.1109/JRPROC.1959.287184.
  • [26] L.Wang, “Frequency responses of phasor-based microprocessor relaying algorithms,” IEEE Trans. Power Deliv., vol. 14, no. 1, pp. 98–109, 2002, doi: 10.1109/61.736695.
  • [27] R.V. Krishna, S. Ashok, and M.G. Krishnan, “Synchronised phasor measurement unit,” 2014 International Conference on Power Signals Control and Computations (EPSCICON), 2014, pp. 1–6.
  • [28] A.G. Phadke and B. Kasztenny, “Synchronized phasor and frequency measurement under transient conditions,” vol. 24, no. 1, pp. 89–95, 2009.
  • [29] B.M. Nikumbh, “Optimal placement of PMUs considering logical topology of communication medium and power system observability,” Master Thesis, UiT The Arctic University of Norway, July 2016.
  • [30] R.P. Haridas, “GPS based phasor technology in electrical power system,” Int. J. Electron. Electr. Eng., vol. 3, no. 6, pp. 493–496, 2015, doi: 10.12720/ijeee.3.6.493-496.
  • [31] E. Dusabimana and S.G. Yoon, “A survey on the micro-phasor measurement unit in distribution networks,” Electronics, vol. 9, no. 2, pp. 305, 2020, doi: 10.3390/electronics9020305.
  • [32] L.A. Lee and V. Centeno, “Comparison of PMU and PMU,” Clemson Univ. Power Syst. Conf. PSC 2018, 2019, doi: 10.1109/PSC.2018.8664037.
  • [33] S. Supriya, M. Magheshwari, S. Sree Udhyalakshmi, R. Subhashini, and Musthafa, “Smart grid technologies: Communication technologies and standards,” Int. J. Appl. Eng. Res., vol. 10, no. 20, pp. 16932–16941, 2015.
  • [34] R. Zurawski, “From wireline to wireless networks and technologies,” IEEE Trans. Ind. Informatics, vol. 3, no. 2, pp. 93–94, 2007, doi: 10.1109/TII.2007.898483.
  • [35] P. Zhang, F. Li, and N. Bhatt, “Next-generation monitoring, analysis, and control for the future smart control center,” IEEE Trans. Smart Grid, vol. 1, no. 2, pp. 186–192, 2010, doi: 10.1109/TSG.2010.2053855.
  • [36] F. Li et al., “Smart transmission grid: Vision and framework,” IEEE Trans. Smart Grid, vol. 1, no. 2, pp. 168–177, 2010, doi: 10.1109/TSG.2010.2053726.
  • [37] K.D. McBee and M.G. Simões, “Utilizing a smart grid monitoring system to improve voltage quality of customers,” IEEE Trans. Smart Grid, vol. 3, no. 2, pp. 738–743, 2012, doi: 10.1109/TSG.2012.2185857.
  • [38] L.E. Singer and D. Peterson, International energy outlook 2010, Energy Information Administration (EIA) Report – 0484, 2011.
  • [39] F. Masood et al., “The compound parabolic concentrators for solar photovoltaic applications: Opportunities and challenges,” Energy Rep., vol. 8, pp. 13558–13584, 2022, doi: 10.1016/j.egyr.2022.10.018.
  • [40] S. Paul, M.S. Rabbani, R.K. Kundu, and S.M.R. Zaman, “A review of smart technology (smart grid) and its features,” Proc. 2014 1st Int. Conf. Non Conv. Energy Search Clean Safe Energy, ICONCE 2014, 2014, pp. 200–203, doi: 10.1109/ICONCE.2014.6808719.
  • [41] G. Dileep, “A survey on smart grid technologies and applications,” Renew. Energy, vol. 146, pp. 2589–2625, 2020, doi: 10.1016/j.renene.2019.08.092.
  • [42] J.D. La Ree et al., “Synchronized phasor measurement applications in power systems,” vol. 1, no. 1, pp. 20–27, 2010.
  • [43] M.M. Eissa, M.E. Masoud, and M.M.M. Elanwar, “A novel back up wide area protection technique for power transmission grids using phasor measurement unit,” IEEE Trans. Power Deliv., vol. 25, no. 1, pp. 270–278, 2010, doi: 10.1109/TPWRD.2009.2035394.
  • [44] S. Raikwal, “Wide Area Monitoring , Control and Protection of Power System,” National Conference on Advancements in Alternate Energy Resources for Rural Applications (AERA-2015), 2015, pp. 18–21.
  • [45] H. Bentarzi, “Improving monitoring, control and protection of power grid using wide area synchro-phasor measurements,” Proc. of the 12th WSEAS International Conference on Automatic control, codelling & simulation, ACMOS’2010, 2010, pp. 93–98.
  • [46] C.L. Ó, J. Park, J. Shin, and Z. Radojevi, “Two terminals numerical algorithm for distance protection, fault location and acing faults recognition based on synchronized phasors,” J. Electr. Eng. Technol., vol. 1, no. 1, pp. 35–41, 2006.
  • [47] C.A. Kumar, “Monitoring and detection of fault using phasor measurement units,” Int. J. Electr. Electron. Mech. Controls, vol. 3, no. 2, pp. 1–11, 2014.
  • [48] A.H. Al-Mohammed and M.A. Abido, “A fully adaptive PMUbased fault location algorithm for series-compensated lines,” IEEE Trans. Power Syst., vol. 29, no. 5, pp. 2129–2137, 2014, doi: 10.1109/TPWRS.2014.2303207.
  • [49] X. Wang, L. Zhang, F. Shi, H. Zhang, Y. Zhang, and J. Zhou, “Fault location in active distribution network based on convariance matrix and PMU data,” 2nd IEEE Conf. Energy Internet Energy Syst. Integr. EI2 2018, 2018, doi: 10.1109/EI2.2018.8582196.
  • [50] Y. Sun, X. Chen, S. Yang, Rusli, K.J. Tseng and G. Amaratunga, “Micro PMU based monitoring system for active distribution networks,” 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), 2017, pp. 518–522, doi: 10.1109/PEDS.2017.8289180.
  • [51] A.A. Arefin et al., “Review of the Techniques of the Data Analytics and Islanding Detection of Distribution Systems Using Phasor Measurement Unit Data,” Electronics, vol. 11, no. 18, p. 2967, 2022, doi: 10.3390/electronics11182967.
  • [52] M. Paolone, A. Borghetti, and C. Nucci, “A synchrophasor estimation algorithm for the monitoring of active distribution networks in steady state and transient conditions,” Proceedings of the 17th Power Systems Computation Conference (PSCC 2011), pp. 1–8, 2011. [Online]. Available: https://pscc-central.epfl.ch/repo/papers/2011/fp221.pdf.
  • [53] G. Sánchez-Ayala, J.R. Agüerc, D. Elizondo and M. Lelic, “Current trends on applications of PMUs in distribution systems,” 2013 IEEE PES Innovative Smart Grid Technologies Conference (ISGT), 2013, pp. 1–6, doi: 10.1109/ISGT.2013.6497923.
  • [54] S. Chakrabarti, E. Kyriakides, T. Bi, D. Cai, and V. Terzija, “Measurements get together,” IEEE Power Energy Mag., vol. 7, no. 1, pp. 41–49, 2009, doi: 10.1109/MPE.2008.930657.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-9728a91f-099f-49d4-8674-742451657a53
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.