Capabilities of Using Fem in Sheet-Metal Forming

• Autorzy: Korga S. , Duda A. , Ciekanowski Z.

Identyfikatory

DOI

10.1515/amm-2016-0161

• Języki publikacji: EN

Abstrakty

EN

The aim of this study was to determine and select boundary conditions of modeling and FEM simulation for plastic processing on the example of sheet-metal forming. For sheet-metal deformation analysis, Deform 3D has been used. The study presents research methods for real and virtual conditions. There are also described common features and these differentiating obtained results. Research of conducted process of sheet-metal forming allows to determine the effectiveness of computer research methods. The finite-element method can be used as an effective tool for the study of plastic processing phenomena considering various operating conditions of individual elements provided the appropriate tools for FEM analysis.

Słowa kluczowe

EN

FEM calculations; modeling of plastic processing; simulations; sheet-metal forming; metallographic study

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 947--951
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Korga S.

• Fundamentals of Technology, Lublin University of Technology, 38 Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Duda A.

• Fundamentals of Technology, Lublin University of Technology, 38 Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Ciekanowski Z.

• Cardinal Stefan Wyszynski University in Warsaw, 5 Dewajtis Str., 01-815 Warszawa, Poland

Bibliografia

• [1] M. Kubica, G. Służałek, Finite element method in the study of tribological - (in polish). Logistics - Science 6, 2003-2013 (2011).
• [2] S. Korga, K. Lenik, Modeling the friction processes to certain conditions of extrusion processes, pumping and drawing - (in polish). Advances in Science and Technology 4, 85-90 (2010).
• [3] P. Lacki, Numerical simulation of the forging process with material discontinuity, The XVI International Scientific and Technological Conference Design and Technology of Drawpieces and Die Stampings, 249-257 (2004).
• [4] S. Korga, K. Lenik, Deform 3D and Solidworks FEM tests in conditions of sliding friction. Archives of Materials Science and Engineering 56, 89-92 (2012).
• [5] S. Korga, K. Lenik, FEM applications to model friction processes in plastic strain conditions. Archives of Materials Science and Engineering 41, 121-124 (2010).
• [6] P. Lacki, Modeling of friction in metal forming processes - (in polish). Publishing house - Częstochowa University of Technology, (2010).
• [7] P. Lacki, Simulation of friction in upsetting process, International Journal of Applied Mechanics and Engineering, 247-255 (2004).
• [8] W. Pauk, Selected aspects of deformable materials in contact, Publishing house - Kielce University of Technology 4, Kielce (2005).
• [9] W. Leszek, Empirical studies. Publishing house - Institute of Technology and Operations, Radom (1997).
• [10] D. Szyndler, Opposite problem as applied to the identification of parameters of plastic processing of metals - (in polish), PhD thesis AGH (2003).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę