PUR-PIR foam produced based on poly(hydroxybutyl citrate) foamed founded with different factories

• Autorzy: Liszkowska J. , Czupryński B. , Paciorek-Sadowska J. , Borowicz M.

Identyfikatory

DOI

10.2478/pjct-2018-0013

• Języki publikacji: EN

Abstrakty

EN

A poly(hydroxybutyl citrate) p(HBC) was obtained. The product compound produced in the solution during esterification, was added to rigid polyurethane-polyisocyanurate foams (PUR-PIR). The amount of petrochemical polyol in the foams was decreased in favor of the p(HBC) from 0.1 to 0.5 equivalent. The foams were foamed in two ways: with distilled water (W foams) and with Solkane 365/227 (S foams). The examination results of both foam series were compared. They showed that the foams foamed with water have higher softening temperature than the foams foamed with solkane. The retention values for both foam series are around 91–95%, and water absorption in the range of 0.7–3.2%. The anisotropy coefficient did not exceed 1.08 (the lowest value being 1.01).

Słowa kluczowe

EN

rigid foam; polyurethane; polyol; citric acid; condensation

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2018
• Tom: Vol. 20, nr 1
• Strony: 87--95
• Opis fizyczny: Bibliogr. 35 poz., rys., tab.

Twórcy

autor

Liszkowska J.

• Kazimierz Wielki University, Bydgoszcz, Poland

autor

Czupryński B.

• Kazimierz Wielki University, Bydgoszcz, Poland

autor

Paciorek-Sadowska J.

• Kazimierz Wielki University, Bydgoszcz, Poland

autor

Borowicz M.

• Kazimierz Wielki University, Bydgoszcz, Poland

Bibliografia

• 1. Kucińska-Lipka. J., Sienkiewicz, M., Gubanska, I. & Zalewski, S. (2017). Microwave radiation in the synthesis of urethane prepolymers. Eur. Polym. J. 88, 126–135.
• 2. Cornille, A., Auvergne, R., Figovsky, O., Boutevin, B. & Caillol, S. (2017). A perspective approach to sustainable routes for non-isocyanate polyurethanes. Eur. Polym. J. 87, 535–552.
• 3. Ionescu, M., Radojčić, D., Wana, X., Shrestha, M.L. & Petrović, Z.S. (2016). Upshaw Highly functional polyols from castor oil for rigid polyurethanes. Eur. Polym. J. 84, 736–749.
• 4. Carriço, C.S., Fraga, T. & Pasa, V.M.D. (2016). Production and characterization of polyurethane foams from a simple mixture of castor oil, crude glycerol and untreated lignin as bio-based polyols. Eur. Polym. J. 85, 53–61.
• 5. Omrani, I., Farhadian, A., Babanejad, N., Shendi, H.K., Ahmadi, A. & Nabid, M.R. (2016). Synthesis of novel high primary hydroxyl functionality polyol from sunflower oil using thiolyne reaction and their application in polyurethane coating. Eur. Polym. J. 82, 220–231.
• 6. Piszczyk, Ł., Strankowski, M., Danowska, M., Hejna, A. & Haponiuk, J.T. (2014). Rigid polyurethane foams from a polyglycerol-based polyol. Eur. Polym. J. 57, 143–150.
• 7. Lubczak, J., Chmiel, E., Barcikowska, M. & Bułdak, N. (2015). New oligoetherols and polyurethane foams prepared using silicic acid derivatives of boric acid. Materials Conference – Modification of Polymers. Status and prospects in 2015. Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
• 8. Kania, E. & Lubczak, J. (2014). A new method for the synthesis of the oligoeterols with pyrimidine ring using barbituric acid and glycidol. Polymers (in Polish) 59, 851–854.
• 9. Radwańska, J., Kurańska, M., Szczepkowski, L. & Prociak, A. (2015). The study bio-rigid polyurethane foams for use in the cosmetic industry. Materials Conference – Modification of Polymers. Status and prospects in 2015. Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
• 10. Prociak, A. & Malewska, E. (2015). Effect of the isocyanate index on the properties of flexible polyurethane bio-foams (in Polish). Materials Conference – Modification of Polymers. Status and prospects in 2015. Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
• 11. Prociak, A. & Malewska, E. (2015). The effect of nanosilica filler on the foaming process and properties of flexible polyurethane foams obtained with rapeseed oil-based polyol. Polymers, 60, 472–479.
• 12. Wojturska, J., Frącz, W., Stagraczyński, R. & Grendysa, P. (2015). Synthesis and evaluation of selected properties of polyurethanes obtained using biopoliols. Materials Conference – Modification of Polymers. Status and prospects in 2015 Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
• 13. Lubczak, J. & Lubczak, R. (2015). Melamine and its salts as an additive flame retardants to polyurethane heat-resistant foams. Materials Conference – Modification of Polymers. Status and prospects in 2015. Scientific Papers of the Institute of Technology of Organic and Polymers, Wroclaw University of Technology, Kudowa Zdrój.
• 14. Czech-Polak, J., Przybyszewski, B., Heneczkowski, M., Czulak, A. & Gude, M. (2016). Effect of environmentally-friendly flame retardants on fire resistance and mechanical properties of rigid polyurethane foams. Polymers, 61, 113–116.
• 15. Paciorek-Sadowska, J., Czupryński, B., Liszkowska, J. & Kotarska, K. (2012). Fire-safe polyurethane plastic modified new flame retardant – use of new methods for flammability test. Enginee. Chem. Equip. 51, 58–60.
• 16. Paciorek-Sadowska, J., Czupryński, B. & Liszkowska, J. (2014). Preparation of new compound reducing flammability. European Chemistry Congress – 5th EuCheMS, Istambul, Turky (2014).
• 17. Paciorek-Sadowska, J., Czupryński, B. & Liszkowska, J. (2015). Boron-containing fire retardant rigid polyurethanepolyisocyanurate foams. Part I-polyol precursors based on boric acid and di(hydroxymetyl)urea derivatives. J. Fire Sci. 33, 37–47.
• 18. Paciorek-Sadowska, J., Czupryński, B., Liszkowska, J. (2015). Boron-containing fire retardant rigid polyurethanepolyisocyanurate foams. Part II-preparation and evaluation. J. Fire Sci. 33, 38–68.
• 19. Paciorek-Sadowska, J., Czupryński, B., Liszkowska, J. (2012). Fire-safe polyurethanes modified with new antipyrene. Chemist, 66, 297–306.
• 20. Paciorek-Sadowska, J. (2010). Modification of PURPIR foams by boroorganic compound obtained on the basis of bis(hydroxymethyl)urea. Polymers, 55 (2010) pp. 373–378.
• 21. Song, H., Jianqiang, L.J., Xue, F. & Cheng, F. (2016). Flame retardant properties of gas sealing materials used in coal mines. Polymers 61 (2016), 266–271.
• 22. Eliwa, R., Oleksy, M., Heneczkowski, M., Oliwa, R., Budzik, G., Kozik, B., Markowska, O., Strachota, A. (2015). Fire-resistant hybrid epoxy composites. Polymers 60, 667–670.
• 23. Liszkowska, J., Czupryński, B., Paciorek-Sadowska, J. (2015). Tris(hydroxydietylene)-2-hydroxypropane-1,2,3- trikarboksylate for rigid PUR-PIR foams. J. Polymer Enginee. 35, 743–751.
• 24. Liszkowska, J., Czupryński, B. & Paciorek-Sadowska, J. (2015). Synthesis of rigid PUR-PIR foams with a new polyol. Enginee. Equip. Chem. 54, 10–11.
• 25. Liszkowska, J., Czupryński, B., Paciorek-Sadowska, J. & Moraczewski, K. (2015). The effect of UV radiation on the properties of rigid PUR-PIR foams. Adv. Polym. Technol. 2015, 0, 21631–21639. DOI 10.1002/adv.21631 (on-line: ADV-10-14-220).
• 26. Paciorek-Sadowska, J., Czupryński, B., Borowicz, M. & Liszkowska, J. (2016). Use of tuff for the production of rigid polyurethane-polyisocyanurate foams. Chem. Ind. 95, 42–47.
• 27. Paciorek-Sadowska, J., Czupryński, B., Borowicz, M. & Liszkowska, J. (2015). Research on obtaining new type of polyurethane composite – rapeseed press cake. Part 1. The strength tests and flammability of a new composite. Chemnitz Technomer 12–13 November 2015.
• 28. Paciorek-Sadowska, J., Czupryński, B., Borowicz, M. & Liszkowska, J. (2015). New plastic polyurethane involving bio-filler. Polimers 60, 586–591.
• 29. Paciorek-Sadowska, J., Czupryński, B., Borowicz, M. & Liszkowska, J. (2014). The use of a by-product of burning coal in the production of polyurethane plastics. Enginee. Equip. Chem. 53, 99–100.
• 30. Kurańska, M., Prociak, A., Cabulis, U. & Kirpluks, M. (2015). Water-blown polyurethane-polyisocyanurate foams based on bio-polyols with wood fibers. Polymers 60 (2015) 705–712.
• 31. Czupryński, B., (2004). Issues of polyurethane chemistry and technology. Akademia Bydgoska, Bydgoszcz.
• 32. Wirpsza, Z. (1991) Poliuretanes. Chemistry, technology, application. WNT, Warsaw.
• 33. Liszkowska, J., Czupryński, B. & Paciorek-Sadowska, J. (2016). Thermal properties of polyurethane-polyisocyanurate (PUR-PIR) foams modified with tris(5-hydroxypentyl)-2-hydroxypropane- 1,2,3-tricarboxylate. J. Adv. Chem. Enginee. 6(2), 148–154.
• 34. Czupryński, B., Liszkowska, J. & Paciorek-Sadowska, J. (2008). Modification of rigid polyurethane-polyisocyanurate foam selected powder fillers. Polymers 53(2008) 48–52.
• 35. Czupryński, B., Liszkowska, J. & Paciorek-Sadowska, J. (2013). The influence silica, kaolin and epoxy resin on heat and thermal properties of rigid PUR-PIR foams. J. Cell. Plast. 49, 375–390.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).