Theoretical research of the chip removal process in milling of the closed profile slots

• Autorzy: Gnytko O. , Kuznetsova A.

Identyfikatory

DOI

10.5604/01.3001.0015.7019

• Języki publikacji: EN

Abstrakty

EN

Purpose: The chip removal from the cutting zone of closed slots (T-shaped, "dovetail", etc.) is relevant since the repeated cutting of the chip with the blades of the tool teeth leads to a decrease in the resource of the cutting tool and processing accuracy. However, theoretical studies of the processes of filling, accumulation, and movement of the chip have not been considered. The purpose of the research is to develop the theoretical foundations of the chip filling and removing processes from profile slots using pneumatic hydrodynamic action of pressure jets of cooling liquid. Design/methodology/approach: Several stages of the analysed process are considered, namely the separation and filling of the space between the cutter teeth with the chip, filling the machined slot with the chip, removing the chip element from the space between the cutter teeth, moving the chip element along the machined slot, moving the chip array along the machined slot, pneumatic hydrodynamic impact. Findings: The complex of mathematical models have been developed to describe the functioning of the chip removal system during the milling of the closed profile slots in this research. The set of the developed models makes it possible to determine the required values of the design and operating parameters of devices that ensure the chip removal from the cutting zone as a result of the use of inertial forces and the application of additional compulsory forces. Research limitations/implications: Theoretical studies were applied for T-shaped slots for milling cutters with diameters from 12.5 mm to 95 mm made of high-speed steel and carbide inserts during steels and cast irons processing. The use of pneumatic hydrodynamic action is limited by the diameters of the nozzle hole from 0.5 mm to 3 mm. Practical implications: The practical significance of the research lies in the ability to control the process of timely chip removal from the cutting zone and to prevent the repeated ingress of the chip under the milling cutter blade. This is achieved by a set of mathematical models that simulate the chip removal process. Research can be applied in production in slots milling, using a liquid not only to cool the cutting zone but also to remove the chip in a timely manner. Originality/value: Theoretical studies previously not carried out for closed profile slots are presented in the research.

Słowa kluczowe

EN

closed slots; milling; chip removal; mathematical models; pneumatic hydrodynamic force

PL

zamknięte szczeliny; frezowanie; usuwanie wiórów; modele matematyczne; pneumatyczna siła hydrodynamiczna

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2022
• Tom: Vol. 113, nr 2
• Strony: 69--76
• Opis fizyczny: Bibliogr. 23 poz.

Twórcy

autor

Gnytko O.

• Faculty of Aircraft Engines, National Aerospace University, Kharkiv, 61070, Ukraine

• https://orcid.org/0000-0002-6560-3262

autor

Kuznetsova A.

• Faculty of Aircraft Engines, National Aerospace University, Kharkiv, 61070, Ukraine

Bibliografia

• [1] D. Stephenson, E. Hughey, A. Hasham, Air flow and chip removal in minimum quantity lubrication drilling, Procedia Manufacturing 34 (2019) 335-342. DOI: https://doi.org/10.1016/j.promfg.2019.06.171
• [2] B.Z. Balázs, M. Takács, Finite element modelling of thin chip removal process, IOP Conference Series: Materials Science and Engineering 426 (2018) 012002. DOI: https://doi.org/10.1088/1757-899X/426/1/012002
• [3] S. Azam, E. Ahmadloo, Analysis of Chip Removal Operations via New Quick-Stop Device, Materials and Manufacturing Processes 31/13 (2016) 1782-1791. DOI: https://doi.org/10.1080/10426914.2015.1127959
• [4] K. Siva Kumar, G. Paulraj, Analysis and optimization of fixture under dynamic machining condition with chip removal effect, Journal of Intelligent Manufacturing 25 (2014) 85-98. DOI: https://doi.org/10.1007/s10845-012-0677-y
• [5] M. Takács, Validation of 3D Finite Element Simulation of Chip Removal Process Performed by Unique Insert Geometry, Key Engineering Materials 581 (2014) 505- 510. DOI: https://doi.org/10.4028/www.scientific.net/kem.581.505
• [6] C. Xu, W. Yiwen, X. Jiazhong, L. Xianli, Calculation of negative-pressure chip in suction-type internal chip removal system and analysis of influencing factors, The International Journal of Advanced Manufacturing Technology 99 (2018) 201-209. DOI: https://doi.org/10.1007/s00170-018-2443-6
• [7] D. Barrenetxea, J. Alvarez, J.I. Marquinez, J.A. Sanchez, Grinding with controlled kinematics and chip removal, CIRP Annals 65/1 (2016) 341-344. DOI: https://doi.org/10.1016/j.cirp.2016.04.097
• [8] T. Ozel, I. Llanos, J. Soriano, P.-J. Arrazola, 3D finite element modelling of chip formation process for machining Inconel 718: comparison of FE software predictions, Machining Science and Technology 15/1 (2011) 21-46. DOI: https://doi.org/10.1080/10910344.2011.557950
• [9] Y. Liu, S. Li, H. Li, X. Qin, Y. Xing, H. Liu, The design and performance evaluation of assisted chip removal system in helical milling of CFRP/Ti stacks, The International Journal of Advanced Manufacturing Technology 108 (2020) 1297-1308. DOI: https://doi.org/10.1007/s00170-020-05421-8
• [10] H. Liu, Y. Guo, D. Li, J. Wang, Material removal mechanism of FCC single-crystalline materials at nano-scales, Chip removal & ploughing, Journal of Materials Processing Technology 294 (2021) 117106. DOI: https://doi.org/10.1016/j.jmatprotec.2021.117106
• [11] A. Banerjee, H. Feng, E. Bordatchev, Geometry of chip formation in circular end milling, The International Journal of Advanced Manufacturing Technology 59 (2012) 21-35. DOI: https://doi.org/10.1007/s00170- 011-3478-0
• [12] S.-H. Chen, Z.-R. Luo, Study of using cutting chip color to the tool wear prediction, The International Journal of Advanced Manufacturing Technology 109 (2020) 823- 839. DOI: https://doi.org/10.1007/s00170-020-05354-2
• [13] J. Valentinčič, A. Lebar, I. Sabotin, P. Drešar, M. Jerman, Development of ice abrasive waterjet cutting technology, Journal of Achievements in Materials and Manufacturing Engineering 81/2 (2017) 76-84. DOI: https://doi.org/10.5604/01.3001.0010.2041
• [14] H.M. Magid, Experimental study of mild steel cutting process by using the plasma arc method, Journal of Achievements in Materials and Manufacturing Engineering 108/2 (2021) 75-85. DOI: https://doi.org/10.5604/01.3001.0015.5066
• [15] J. Kopač, F. Pušavec, Development and manufacturing of customized milling cutters for individual tool-making industry, Journal of Achievements in Materials and Manufacturing Engineering 82/1 (2017) 26-32. DOI: https://doi.org/10.5604/01.3001.0010.2076
• [16] D. Rylska, G. Sokołowski, B. Konieczny, J. Sokołowski, The structure and corrosive properties of the CoCr-base dental alloy obtained by soft material milling followed by sinterization, Journal of Achievements in Materials and Manufacturing Engineering 74/2 (2016) 60-71. DOI: https://doi.org/10.5604/17348412.1225911
• [17] A. Breus, S. Abashin, O. Serdiuk, Carbon nano-structure growth: new application of magnetron discharge, Journal of Achievements in Materials and Manufacturing Engineering 109/1 (2021) 17-25. DOI: https://doi.org/10.5604/01.3001.0015.5856
• [18] I. Levchenko, M. Romanov, O. Baranov, M. Keidar, Ion deposition in a crossed E × B field system with vacuum arc plasma sources, Vacuum 72/3 (2003) 335-344. DOI: https://doi.org/10.1016/j.vacuum.2003.09.002
• [19] O. Baranov, M. Romanov, Current distribution on the substrate in a vacuum arc deposition setup, Plasma Processes and Polymers 5/3 (2008) 256-262. DOI: https://doi.org/10.1002/ppap.200700160
• [20] O.O. Baranov, J. Fang, A.E. Rider, S. Kumar, K. Ostrikov, Effect of ion current density on the properties of vacuum arc-deposited TiN coatings, IEEE Transactions on Plasma Science 41/12 (2013) 3640- 3644. DOI: https://doi.org/10.1109/TPS.2013.2286405
• [21] C. Xu, W. Yiwen, X. Jiazhong, L. Xianli, Design of internal-chip-removal drill for CFRP drilling and study of influencing factors of drilling quality, The International Journal of Advanced Manufacturing Technology 106 (2020) 1657-1669. DOI: https://doi.org/10.1007/s00170-019-04698-8
• [22] F. Bleicher, M. Reiter, J. Brier, Increase of chip removal rate in single-lip deep hole drilling at small diameters by low-frequency vibration support, CIRP Annals 68/1 (2019) 93-96. DOI: https://doi.org/10.1016/j.cirp.2019.04.028
• [23] J. Xu, M. Mansori, J. Voisin, M. Chen, F. Ren, On the interpretation of drilling CFRP/Ti6Al4V stacks using the orthogonal cutting method: Chip removal mode and subsurface damage formation, Journal of Manufacturing Processes 44 (2019) 435-447. DOI: https://doi.org/10.1016/j.jmapro.2019.05.052

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).