Polymer matrix composite laminate under hygrothermal exposure

• Autorzy: Kormaníková E.
• Języki publikacji: EN

Abstrakty

EN

The static load model of laminate with the hygrothermal load is considered in the paper. The corresponding ply properties are calculated using Mori-Tanaka method. A parametric study is conducted by varying the fiber volume fraction in one laminate layer and the fiber orientation of the angle plies in the laminate. The internal forces of laminate plate with symmetric and unsymmetric stacking of layers are investigated.

Słowa kluczowe

EN

polymer matrix composites; laminate plate; hygrothermal model; mechanical characteristics; thermal strength of ratio; moisture strength of ratio; internal forces

PL

kompozyty z osnową polimerową; płyta laminowana; model higrotermiczny; właściwości mechaniczne; wytrzymałość cieplna; wilgotność; siły wewnętrzne

• Wydawca: Komisja Inżynierii Budowlanej Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Roczniki Inżynierii Budowlanej
• Rocznik: 2016
• Tom: z. 16
• Strony: 49--54
• Opis fizyczny: Bibliogr 6 poz., tab., wykr.

Twórcy

autor

Kormaníková E.

• Technical University of Košice, Faculty of Civil Engineering, Košice, Slovakia

Bibliografia

• [1] Chamis C. C., Simplified Composite Micromechanics Equations for Hygral, Thermal and Mechanical Properties, Houston, TX, 1-10, 1983.
• [2] Sykora J., Sejnoha M., Sejnoha J., Homogenization of coupled heat and moisture transport in masonry structures including interfaces, Applied Mathematics and Computation, 219, 13, 7275-7285, 2013.
• [3] Kavipurapu P. K., Forced Vibration and Hygrothermal Analysis of Composite Laminated Beams under the Action of Moving Loads, Morgantown, West Virginia, 2005.
• [4] Laš V., Mechanics of composite materials, West Bohemia University, 2008, (in Czech)
• [5] Kormanikova E., Mamuzic I., Optimization of laminates subjected to failure criterion, Metalurgija, 50, 1, 41-44, 2011.
• [6] Dhabale R., Jatti V. S., Optimization of material removal rate of AlMg1SiCu in turning operation using genetic algorithm, WSEAS Transactions on Applied and Theoretical Mechanics, 10, 95-101, 2015.