Polyester sail technical woven fabric behaviour under uniaxial and biaxial tensile tests

• Autorzy: Ambroziak A. , Kłosowski P.

Identyfikatory

DOI

10.15632/jtam-pl.56.1.227

• Języki publikacji: EN

Abstrakty

EN

The paper is focused on the identification of mechanical properties of a sail technical woven fabric (yacht sailcloth polyester) style 480 AP with MTO (Medium Tempered Optimized) finish. The non-linear elastic behaviour of the fabric applied for sails is investigated under uniaxial and biaxial tensile tests. Comparison of non-linear elastic parameters with others polyester coated fabrics is made. This paper is intended to be an introduction to a comprehensive investigation on sail technical woven fabrics.

Słowa kluczowe

EN

sail fabric; polyester coated fabrics; textiles; mechanical properties; uniaxial tensile test; biaxial tensile tests

• Wydawca: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
• Czasopismo: Journal of Theoretical and Applied Mechanics
• Rocznik: 2018
• Tom: Vol. 56 nr 1
• Strony: 227--238
• Opis fizyczny: Bibliogr. 16 poz., rys., tab.

Twórcy

autor

Ambroziak A.

• Gdansk University of Technology, Faculty of Civil and Environmental Engineering, Gdańsk, Poland

autor

Kłosowski P.

• Gdansk University of Technology, Faculty of Civil and Environmental Engineering, Gdańsk, Poland

Bibliografia

• 1. Ambroziak A., 2015a, Mechanical properties of polyester coated fabric subjected to biaxial loading, Journal of Materials in Civil Engineering, 27, 11
• 2. Ambroziak A., 2015b, Mechanical properties of PVDF-coated fabric under tensile tests, Journal of Polymer Engineering, 35, 4, 377-390
• 3. Ambroziak A., Kłosowski P., 2011, Review of constitutive models for technical woven fabrics in finite element analysis, AATCC Review, 11, 3, 58-67
• 4. Bathurst R.J., Shinoda M., 2004, Strain measurement of geogrids using a video-extensometer technique, Geotechnical Testing Journal, 27, 5, 456-463
• 5. Badel P., Vidal-Salle E., Boisse P., 2008, Large deformation analysis of fibrous materials using rate constitutive equations, Computers and Structures, 86, 11-12, 1164-1175
• 6. Benfratello S., Cirello A., Palizzolo L., 2013, Effect of surface finish on the mechanical behaviour of Dacron 360 woven, Ocean Engineering, 70, 88-96
• 7. Benfratello S., Palizzolo L., 2010, Experimental characterization of Dacron 360 woven constitutive behaviour, Meccanica dei Materiali e delle Strutture, 1, 3, 13-23
• 8. Blicblau A.S., Singh M., McConnell E., Pleaner M., 2008, Stress analysis of a novice windsurfer sail by finite element analysis, Mathematical and Computer Modelling, 47, 11-12, 1108-1116
• 9. Gasser A., Boisse P., Hanklar S., 2000, Mechanical behaviour of dry fabric reinforcements. 3D simulations versus biaxial tests, Computational Materials Science, 17, 1, 7-20
• 10. Le Maıtre O., Huberson S., Souza de Cursi J.E., 1996, Application of a non-convex model of fabric deformations to sail cut analysis, Journal of Wind Engineering and Industrial Aerodynamics, 63, 77-93
• 11. Marquardt D.W., 1963, An algorithm for least squares estimation of parameters, Journal of the Society of Industrial and Applied Mathematics, 11, 431-441
• 12. Nielsen J.N., 1963, Theory of flexible aerodynamic surfaces, Journal of Applied Mechanics, 30, 435-442
• 13. PN-EN ISO 1421:2001 Rubber- or plastics-coated fabrics – Determination of tensile strength and elongation at break
• 14. Spalatelu-Lazar M., Lene F., Turbe N., 2008, Modelling and optimization of sails, Computers and Structures, 86, 1486-1493
• 15. Triki E., Dolez P., Vu-Khanh T., 2011, Tear resistance of woven textiles – criterion and mechanisms, Composites Part B: Engineering, 42, 7, 1851-1859
• 16. Żyliński T., 1965, Textile Metrology (in Polish), Wydawnictwo Przemysłu Lekkiego i Spożywczego, Warsaw

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).