PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Prąd włączania transformatora nadprzewodnikowego

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
The inrush currents of superconducting transformer
Języki publikacji
PL
Abstrakty
PL
W artykule dokonano analizy parametrów prądu włączania transformatora nadprzewodnikowego o mocy 10 kVA. Uzyskane z eksperymentu dane porównano z parametrami prądu włączania transformatora z uzwojeniami miedzianymi tej samej mocy. Odmienna geometria transformatora nadprzewodnikowego oraz właściwości nadprzewodników przekładają się na inne parametry prądu włączania.
EN
This article analyzes the inrush current parameters of the 10 kVA superconducting transformer. Obtained from the experimental data were compared with the parameters of the inrush current of 10 kVA transformer with copper windings. Different superconducting transformer geometry and the properties of superconductors translate into other parameters inrush current.
Rocznik
Strony
245--248
Opis fizyczny
Bibliogr. 12 poz., rys., tab.
Twórcy
  • Politechnika Lubelska, Instytut Podstaw Elektrotechniki i Elektrotechnologii
autor
  • Instytut Elektrotechniki w Warszawie
  • Instytut Elektrotechniki w Warszawie
autor
  • Instytut Elektrotechniki w Warszawie
autor
  • Instytut Elektrotechniki w Warszawie
autor
  • Instytut Elektrotechniki w Warszawie
  • Instytut Elektrotechniki w Warszawie
Bibliografia
  • [1] R. A. Turner, K. S. Smith, “Resonance Excited by Transformer Inrush Current in Inter-connected Offshore Power Systems,” IEEE Industry Applications Society Annual Meeting, Edmonton, Canada, October 2008.
  • [2] M. Steurer and K. Fröhlich, “The impact of inrush currents on the mechanical stress of high voltage power transformer coils,” IEEE Trans. Power Del., vol. 17, no. 1, pp. 155–160, Jan. 2002.
  • [3] A. A. Adly, “Computation of inrush current forces on transformer windings,” IEEE Trans. Magn., vol. 37, no. 4, pp. 2855–2857, Jul. 2001.
  • [4] J. H. Brunke, K. J. Frolich, “Elimination of Transformer Inrush Currents by Controlled Switching – Part I & II”, IEEE Transactions on Power Delivery, vol. 16. no. 2, April 2001.
  • [5] G. Wojtasiewicz, G. Komarzyniec, T. Janowski, S. Kozak, J. Kozak, M. Majka, B. Kondratowicz-Kucewicz, Inrush Current of Superconducting Transformer, IEEE Transactions on Applied Superconductivity, Volume: 23, Issue: 3, Part: 2, 2013.
  • [6] E. Jezierski, “Transformatory,” WNT, Warszawa 1983.
  • [7] R. S. Girgis, E. G. teNyenhuis, “Characteristics of Inrush Current of Present Designs of Power Transformers,” Power Engineering Society General Meeting, IEEE, 24-28 June 2007.
  • [8] T. Janowski, B. A. Glowacki, G. Wojtasiewicz, S. Kozak, J. Kozak, B. Kondratowicz-Kucewicz, M. Majka, M. Wozniak, Fault Current Limitation in Power Network by the Superconducting Transformers Made of 2G HTS, IEEE Transactions on Applied Superconductivity, Volume: 2, Issue: 3, Part: 2, 2011, Page(s): 1413 – 1416.
  • [9] H. Shimizu, K. Mutsuura, Y. Yokomizu, T. Matsumura, “Inrushcurrent-limiting with high Tc Superconductor,” IEEE Transactions on Applied Superconductivity, vol. 15, no. 2, June 2005.
  • [10] S. Nishimiya, T. Ishigohka, A. Ninomiya, K. Arai, “Quench Characteristic of Superconducting Transformer by Inrush Current,” IEEE Transactions on Appiled Superconductivity, vol. 17, no. 2, part 2, pages 1931-1934, 2007.
  • [11] H. Kimura, K. Honda, H. Hayashi, K. Tsutsumi, M. Iwakuma, K. Funaki, T. Bohno, A. Tomioka, Y. Yagi, H. Maruyama, K. Ohashi, “Test results of a HTS power transformer connected to a power grid,” Elsevier, Physica C: Superconductivity, vol. 372–376, part 3, August 2002, pages 1694–1697.
  • [12] T. Ishigohka, K. Uno, S. Nishimiya, “Experimental Study on Effect of In-Rush Current of Superconducting Transformer,” IEEE Transactions on Appiled Superconductivity, vol. 16, no. 2, June 2006.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-9654496d-0156-4239-b4b8-cc2c81f652ce
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.