Aluminum Metal Matrix Composites with SiC, Al₂O₃ and Graphene – Review

• Autorzy: Aybarc U. , Dispinar D. , Seydibeyoglu M. O.

Identyfikatory

DOI

10.24425/122493

• Języki publikacji: EN

Abstrakty

EN

Light weight, low density with high mechanical properties and corrosion resistance, aluminum is the most important material and is commonly used for high performance applications such as aerospace, military and especially automotive industries. The researchers who participate in these industries are working hard to further decrease the weight of end products according to legal boundaries of greenhouse gases. A lot of research was undertaken to produce thin sectioned aluminum parts with improved mechanical properties. Several alloying element addition were investigated. Yet, nowadays aluminum has not met these expectations. Thus, composite materials, particularly metal matrix composites, have taken aluminum’s place due to the enhancement of mechanical properties of aluminum alloys by reinforcements. This paper deals with the overview of the reinforcements such as SiC, Al₂O₃ and graphene. Graphene has recently attracted many researcher due to its superior elastic modulus, high fatigue strength and low density. It is foreseen and predicted that graphene will replace and outperform carbon nanotubes (CNT) in near future.

Słowa kluczowe

EN

SiC; Al2O3; graphene; aluminum metal matrix composite; metal matrix composite

PL

SiC; Al2O3; grafen; kompozyt osnowy metalowej; kompozyt metalowy

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2018
• Tom: Vol. 18, iss. 2
• Strony: 5--10
• Opis fizyczny: Bibliogr. 37 poz., rys., tab.

Twórcy

autor

Aybarc U.

• Izmir Katip Celebi University, Turkey; CMS Izmir, Turkey

autor

Dispinar D.

• Istanbul University, Turkey

autor

Seydibeyoglu M. O.

• Izmir Katip Celebi University, Turkey

Bibliografia

• [1] Campbell, J. (2015). Complete Casting Handbook: Metal Casting Processes, Metallurgy, Techniques and Design. Elsevier Science.
• [2] Dispinar, D., et al. (2010). Degassing, hydrogen and porosity phenomena in A356. Materials Science and Engineering: A. 527(16), 3719-3725.
• [3] Tan, E., Tarakcilar, A. & Dispinar, D. (2015). The effect of melt quality and quenching temperature on the Weibull distribution of tensile properties in aluminium alloys. Materialwissenschaft und Werkstofftechnik. 46(10), 1005-1013.
• [4] Tan, E., Tarakcilar, A.R. & Dispinar, D. (2012). Correlation between Melt Quality and Fatigue Properties of 2024, 6063 and 7075. Supplemental Proceedings: Materials Properties, Characterization, and Modeling. 2, 479-485.
• [5] Yuksel, C., et al. (2016). Quality Evaluation of Remelted A356 Scraps. Archives of Foundry Engineering. 16(3), 151-156.
• [6] Al Hawari, A., et al. (2014). A Life Cycle Assessment (LCA) of Aluminum Production Process. World Academy of Science, Engineering and Technology. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering. 8(4), 704-710.
• [7] Tsakiridis, P. (2012). Aluminium salt slag characterization and utilization–a review. Journal of hazardous materials. 217, 1-10.
• [8] Kalpakjian, S., Schmid, S., Kok, C. (2009). Manufacturing, engineering and technology SI. London: Prentice Hall, Pearson Education Ltd.
• [9] Kandpal, B.C., Kumar, J. Singh, H. (2014). Production Technologies of Metal Matrix Composite:-a review. International Journal of Research in Mechanical Engineering & Technology, 2249-5770.
• [10] Garg, H.K., et al. (2012). Hybrid Metal Matrix Composites and further improvement in their machinability-a review. International Journal of Latest Research in Science and Technology. 1(1), 36-44.
• [11] Ramnath, B.V., et al., (2014). Aluminium metal matrix composites- a review. Rev. Adv. Mater. Sci. 38(5).
• [12] Reddy, B., Das, K. & Das, S. (2007). A review on the synthesis of in situ aluminum based composites by thermal, mechanical and mechanical–thermal activation of chemical reactions. Journal of Materials Science. 42(22), 9366-9378.
• [13] Alaneme, K. & Bodunrin, M. (2013). Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process. Acta Technica Corviniensis-bulletin of engineering. 6(3), 105.
• [14] Mula, S., et al., (2009). On structure and mechanical properties of ultrasonically cast Al–2% Al 2O3 nanocomposite. Materials Research Bulletin. 44(5), 1154-1160.
• [15] Kok, M. (2005). Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites. Journal of Materials Processing Technology. 161(3), 381-387.
• [16] Ezatpour, H., Beygi Nasrabadi, H., Sajjadi, S.A. (2011) Microstructure and mechanical properties of Al/Al2O3 micro and nano nanocomposites fabricated by a novel stirr casting. in 2th conferences on applications of nano technologie in sciences, engineering and Medicines-NTC 2011.
• [17] Singh, L. Ram, B. & Singh, A. (2013). Optimization of process parameter for stir casted aluminium metal matrix composite using Taguchi method. International Journal of Research in Engineering and Technology. 2(08), 375-383.
• [18] Sujan, D., et al. (2012). Physio-mechanical properties of Aluminium metal matrix composites reinforced with Al2O3 and SiC. World Academy of Science, Engineering and Technology. 68.
• [19] Ezatpour, H., et al. (2001). microstructure and mechanical properties os Al-Al2O3 micro and nano composites fabricated by a novel stir casting route. in 2nd Conferences on Application of nanotechnology in Science, Engineering and Medicine, Mashhad-Iran.
• [20] Konopka, Z. & Pasieka, A. (2014). The Influence of Pressure Die Casting Parameters on the Mechanical Properties of AlSi11/10 Vol.% SiC Composite. Archives of Foundry Engineering. 14(1), 59.
• [21] Konopka, Z. & Pasieka, A. (2014). Tribological Properties of AlSi11-SiCp Composite Castings Produced by Pressure Die Casting Method. Archives of Foundry Engineering. 14(3), 37.
• [22] Łągiewka, M. & Konopka, Z. (2015). Properties of AlSi9Mg Alloy Matrix Composite Reinforced with Short Carbon Fibre after Remelting. Archives of Foundry Engineering. 15(3), 39.
• [23] Pasieka, A. & Konopka, Z. (2013). The Influence of Pressure Die Casting Parameters on Distribution of Reinforcing Particles in the AlSi11/10% SiC Composite. Archives of Foundry Engineering. 13(3), 64.
• [24] Rahman, M.H. & Al Rashed, H.M. (2014). Characterization of silicon carbide reinforced aluminum matrix composites. Procedia Engineering. 90, 103-109.
• [25] Singla, M., et al., (2009). Development of aluminium based silicon carbide particulate metal matrix composite. Journal of Minerals and Materials Characterization and Engineering. 8(06), 455.
• [26] Dwivedi, S.P., Sharma, S. & Mishra, R.K. (2014). Comparison of microstructure and mechanical properties of A356/SiC metal matrix composites produced by two different melting routes. International Journal of Manufacturing Engineering.
• [27] Karvanis, K., et al. (2016). Production and mechanical properties of Al-SiC metal matrix composites. in IOP Conference Series: Materials Science and Engineering. IOP Publishing.
• [28] Prabu, S.B., et al., (2006). Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite. Journal of Materials Processing Technology. 171(2), 268-273.
• [29] Ozben, T., Kilickap, E. Cakır, O. (2008). Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC. Journal of materials processing technology. 198(1), 220-225.
• [30] Meena, K., Manna, A. & Banwait, S. (2013). An analysis of mechanical properties of the developed Al/SiC-MMC's. American Journal of Mechanical Engineering. 1(1), 14-19.
• [31] Akçamlı, N., Gökçe, H. & Uzunsoy, D. (2016). Processing and characterization of graphene nano-platelet (GNP) reinforced aluminum matrix composites. Materials Testing. 58(11-12), 946-952.
• [32] Bartolucci, S.F., et al. (2011). Graphene–aluminum nanocomposites. Materials Science and Engineering: A. 528(27), 7933-7937.
• [33] Casati, R. & Vedani, M. (2014). Metal matrix composites reinforced by nano-particles— a review. Metals. 4(1), 65-83.
• [34] Venkatesan, S., Xavior, M.A. (2000). Mechanical behaviour of Aluminium metal matrix composite reinforced with graphene particulate by stir casting method.
• [35] Narwate, M.M. & Mohandas, K. (2016). A Study on Mechanical and Tribological Properties of Aluminum Metal Matrix Composite Reinforced With TiO2 and Graphene Oxide. International Journal. 4(4), 729-732.
• [36] Wang, J., et al. (2012). Reinforcement with graphene nanosheets in aluminum matrix composites. Scripta Materialia. 66(8), 594-597.
• [37] Jagadish, B.S. (2015). Synthesis and characterization of aluminium2024 and graphene metal matrix composites by powder metallurgy. School of Mechanical and Building sciences, VIT University, Vellore, Tamil Nadu, India, 2, p. 14-18.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).