Assessment of Ergonomic Risks in Manufacturing Enterprises in the Czech Republic

• Autorzy: Hoke Eva , Heinzová Romana , Veselík Petr , Martinková Michaela

Identyfikatory

DOI

10.24425/mper.2024.153119

• Języki publikacji: EN

Abstrakty

EN

The paper maps the evaluation of ergonomic risks in Czech processing industry enterprises. In today’s dynamic times, the main challenge is to retain quality employees and focus on them. Safety and health protection at work and monitoring and evaluation of ergonomic risks at the workplace are related to employee care. The paper summarizes the results of a nationwide questionnaire survey of the manufacturing industry in the Czech Republic. The obtained data was evaluated by using basic descriptive statistics. Nonparametric statistical analysis (Fisher’s exact test) confirmed or excluded hypotheses. The performed analysis shows that the use of ergonomic risk methods does not statistically depend on the type and size of the enterprises. It is further evident from the research results that Czech enterprises should monitor ergonomic risks more.

Słowa kluczowe

EN

ergonomic; Fisher exact test; human factor; industry 4.0; lean management; manufacturing industry

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2024
• Tom: Vol. 15, No. 4
• Strony: 1--10
• Opis fizyczny: Bibliogr. 45 poz., tab.

Twórcy

autor

Hoke Eva

• Tomas Bata University in Zlín, Faculty of Logistics and Crisis Management, Studentské náměstí 1532, 686 01 Uherské Hradiště, Czech Republic

autor

Heinzová Romana

• Tomas Bata University in Zlín, Faculty of Logistics and Crisis management, Czech Republic

autor

Veselík Petr

• Tomas Bata University in Zlín, Faculty of Logistics and Crisis management, Czech Republic

autor

Martinková Michaela

• Tomas Bata University in Zlín, Faculty of Logistics and Crisis management, Czech Republic

Bibliografia

• Abu-Kasim, M.H., & Mohd-Taib, M.F. (2022). Ergonomics Evaluation for Turning Machinists in Oil and Gas Industry. The International Journal of Integrated Engineering, 14 (2), 55–61. DOI: 10.30880/ijie.2022.14.02.008
• Al-Zuheri, A., Kaitan, H.S., Al Saffar, I. Q., & Al-Zubaidi, S. (2023). An Evaluation of Lean Intervention Combined with Ergonomics on Enhancing Productivity and Workplace Risk Reduction: A Literature Review. Industrial Engineering & Management Systems, 22 (3), 259-272. DOI: 10.7232/iems.2023.22.3.259
• Bevan, S. (2015). Economic impact of musculoskeletal disorders (MSDs) on work in Europe. Best practice & research. Clinical rheumatology, 29 (3), 356–373. DOI: 10.1016/j.berh.2015.08.002
• Bortolini, M., Botti, L., Galizia, F.G., & Mora, C. (2023). Ergonomic Design of an Adaptive Automation Assembly System. Machines, 11 (9). DOI: 10.3390/machines11090898
• Bridger, R.S. (2006). Introduction to ergonomics. Boca Raton, FL: CRC Press.
• Brito, M.F., Ramos, A.L., Carneiro, P., & Gonçalves, M.A. (2019). A continuous improvement assessment tool, considering lean, safety and ergonomics. International Journal of Lean Six Sigma, 11 (5), 879–902. DOI: 10.1108/IJLSS-12-2017-0144
• Burov, O. (2020). Human Factors/Ergonomics in eWorld: Methodology, Techniques and Applications. Advances in Manufacturing, Production Management and Process Control, 459–464. DOI: 10.1007/978-3-030-20494-5_43
• Cerqueira, S.M., Silva, A.F.D., & Santos, C.P. (2020). Smart Vest for Real-Time Postural Biofeedback and Ergonomic Risk Assessment. IEEE Access, 8, 107583–107592. DOI: 10.1109/ACCESS.2020.3000673
• Colim, A., Morgado, R., Carneiro, P., Costa, N., Faria, C., Sousa, N., Rocha, L. A., & Arezes, P. (2021). Lean Manufacturing and Ergonomics Integration: Defining Productivity and Wellbeing Indicators in a Human–Robot Workstation. Sustainability, 13 (4). DOI: 10.3390/su13041931
• Dalle Mura, M., & Dini, G. (2019). Optimizing ergonomics in assembly lines: A multi objective genetic algorithm. CIRP Journal of Manufacturing Science and Technology, 27, 31–45. DOI: 10.1016/j.cirpj.2019.08.004
• Das, S., Krishna Moorthy, M., & Shanmugaraja, K. (2023). Analysis of Musculoskeletal Disorder Risk in Cotton Garment Industry Workers. Journal of Natural Fibers, 20 (1). DOI: 10.1080/15440478.2022.2162182
• David G.C. (2005). Ergonomic methods for assessing exposure to risk factors for work-related musculoskeletal disorders. Occupational medicine (Oxford, England), 55 (3), 190–199. DOI: 10.1093/occmed/kqi082
• Deloitte, (2022). 2022 manufacturing industry outlook.
• Generosi, A., Agostinelli, T., Ceccacci, S., & Mengoni, M. (2022). A novel platform to enable the future human-centered factory. The International Journal of Advanced Manufacturing Technology, 122 (11–12), 4221–4233. DOI: 10.1007/s00170-022-09880-z
• Grenčíková, A., Španková, J., & Kozová, K. (2024). Generational Differences in Work Preferences in the Context of the Labor Market: Slovakian Case. Vadyba Journal of Management, 1(40), 27-33. DOI: 10.38104/vadyba.2024.1.03
• Hassan, A., Beumer, A., Kuijer, P.P.F.M., & van der Molen, H.F. (2022). Work-relatedness of carpal tunnel syndrome: Systematic review including meta-analysis and GRADE. Health science reports, 5 (6), e888. DOI: 10.1002/hsr2.888
• Hendl, J. (2015). Přehled statistických metod: analýza a metaanalýza dat (Páté, rozšířené vydání). Portál.
• Jazani, R.K., Sahlabadi, A.S., & Mousavi, S.S. (2018). Relationship Between Lean Manufacturing and Ergonomics. Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future, 162–166. DOI: 10.1007/978-3-319-60474-9_15
• Jeong, S., & Kook, J. (2023). CREBAS: Computer-Based REBA Evaluation System for Wood Manufacturers Using MediaPipe. Applied Sciences, 13 (2). DOI: 10.3390/app13020938
• Karwowski, W. (2006). The discipline of ergonomics and human factors. Handbook of human factors and ergonomics, 3rd edn. Wiley, USA
• Karwowski, W. (2012). The discipline of ergonomics and human factors. Handbook of human factors and ergonomics, 4rd edn. Wiley, USA
• Klussmann, A., Liebers, F., Gebhardt, H., Rieger, M. A., Latza, U., & Steinberg, U. (2017). Risk assessment of manual handling operations at work with the key indicator method (KIM-MHO) – determination of criterion validity regarding the prevalence of musculoskeletal symptoms and clinical conditions within a cross-sectional study. BMC musculoskeletal disorders, 18 (1), 184. DOI: 10.1186/s12891-017-1542-0
• Koningsveld, E. (2019). History of the International Ergonomics Society. 1985–2018. IEA Press. 50th Anniversary Booklet, The International Ergonomics Association.
• Kovanda, J. (2022). Material Flows Mobilized by Motor Vehicles and Transport Equipment Manufacturing and Use in the Czech Republic: an Application of Economy Wide Material System Analysis. Statistika: Statistics and Economy Journal, 102 (1), 84–97. DOI: 10.54694/stat.2021.28
• Kozová, K., Grenčíková, A., & Habánik, J. (2024). Building a sustainable future: Gender, education & workforce needs of Gen Z. Economics and Sociology, 17(2), 209–223. DOI: 10.14254/2071-789X.2024/17-2/10
• Kumar, D.A., RAMESH, V., & Skanda, M.G. (2019). Implementation of Rapid Upper Limb Assessment Technique in Automotive Parts Manufacturing Industry. International Journal of Recent Technology and Engineering (IJRTE), 8 (3), 1599–1602. DOI: 10.35940/ijrte.C4421.098319
• Mohammadpour, H., Jalali, M., Moussavi-Najarkola, S.A., Farhadi, S., Kangavari, M., & Ghanbari Sartang, A. (2018). Ergonomic Risk Assessment of Distal Upper Extremities by Job Strain Index in Carpet Weavers. Health Scope, 7 (1). DOI: 10.5812/jhealthscope.64182
• Naeini, H.S., & Mosaddad, S.H. (2013). The Role of Ergonomics Issues in Engineering Education. Procedia – Social and Behavioral Sciences, 102, 587–590. DOI: 10.1016/j.sbspro.2013.10.775
• Nelfiyanti, Nik Mohamed, H.N.M.Z., & Rashid, M.F.F.A. (2022). Analysis of Measurement and Calculation of MSD Complaint of Chassis Assembly Workers Using OWAS, RULA and REBA Method. International Journal of Automotive and Mechanical Engineering, 19 (2), 9681–9692. DOI: 10.15282/ijame.19.2.2022.05.0747
• Onofrejova, D., Pacaiova, H., Kotianova, Z., Glatz, J., & Kulka, J. (2022). Ergonomic Risk Assessment of Taking the Product Directly from the Production Line. MM Science Journal, 2022 (5). DOI: 10.17973/MMSJ.2022_12_2022084
• Pech, M., & Vaněček, D. Exploration of Differences in Managers’ Perception of the Industry 4.0 Advantages for Manufacturing Enterprises in the Czech Republic. Management and Production Engineering Review, 9– 18. DOI: 10.24425/mper.2022.140872
• Procházková Ilinitchi, C., Pustovalová, A., & Procházka, D. (2021). Elasticity of Substitution in the Manufacturing Sector in the Czech Republic. Politická ekonomie, 69 (4), 435–456. DOI: 10.18267/j.polek.1324
• Ramos-García, V.M., López-Leyva, J.A., Ramos-García, R.I., García-Ochoa, J.J., Ochoa-Vázquez, I., GuerreroOrtega, P., Verdugo-Miranda, R., & Verdugo-Miranda, S. (2022). Ergonomic Factors That Impact Job Satisfaction and Occupational Health during the SARSCoV-2 Pandemic Based on a Structural Equation Model: A Cross-Sectional Exploratory Analysis of University Workers. International Journal of Environmental Research and Public Health, 19 (17). DOI: 10.3390/ijerph191710714
• Restuputri, D.P., Masudin, I., & Putri, A.R.C. (2020). The comparison of ergonomic risk assessment results using job strain index and OCRA methods. IOP Conference Series: Materials Science and Engineering, 821 (1). DOI: 10.1088/1757-899X/821/1/012029
• Russo, F., Di Tecco, C., Fontana, L., Adamo, G., Papale, A., Denaro, V., & Iavicoli, S. (2020). Prevalence of work related musculoskeletal disorders in Italian workers: is there an underestimation of the related occupational risk factors? BMC Musculoskeletal Disorders, 21 (1). DOI: 10.1186/s12891-020-03742-z
• Salvendy, G., & Karwowski, W. (2021). Handbook of Human Factors and Ergonomics (Fifth Edition). John Wiley & Sons.
• Seo, J.O., & Lee, S.H. (2021). Automated postural ergonomic risk assessment using vision-based posture classification. Automation in Construction, 128, Article 103725. DOI: 10.1016/j.autcon.2021.103725
• Steinberg U. (2012). New tools in Germany: development and appliance of the first two KIM (“lifting, holding and carrying” and “pulling and pushing”) and practical use of these methods. Work (Reading, Mass.), 41 Suppl 1, 3990–3996. DOI: 10.3233/WOR-2012-0698-3990
• Teixeira, R.C.M., Guimarães, W.P.S., Ribeiro, J.G., Fernandes, R.A., Nascimento, L.B.F., Torné, I.G., Cardoso, F.S., & Monteiro, G.R. (2022). Analysis of the Reduction of Ergonomic Risks through the Implementation of an Automatic Tape Packaging Machine. International Journal of Environmental Research and Public Health, 19 (22). DOI: 10.3390/ijerph192215193
• Van Crombrugge, I., Sels, S., Ribbens, B., Steenackers, G., Penne, R., & Vanlanduit, S. (2022). Accuracy Assessment of Joint Angles Estimated from 2D and 3D Camera Measurements. Sensors, 22 (5). DOI: 10.3390/s22051729
• Van der Have, A., Van Rossom, S., & Jonkers, I. (2023). Musculoskeletal-Modeling-Based, Full-Body LoadAssessment Tool for Ergonomists (MATE): Method Development and Proof of Concept Case Studies. International Journal of Environmental Research and Public Health, 20 (2). DOI: 10.3390/ijerph20021507
• WHO. (2010). Healthy workplaces: a model for action. https://www.who.int/publications/i/item/9789241599313
• Widodo, L., Ariyanti, S., & Jason, A. (2020). Ergonomic Intervention to Improve The Productivity of Brick Press Tool in Small and Medium Entreprise (SME) Akheng Kobar. IOP Conference Series: Materials Science and Engineering, 847 (1). DOI: 10.1088/1757-899X/847/1/012057
• Yunus, M.N.H., Jaafar, M.H., Mohamed, A.S.A., Azraai, N.Z., & Hossain, M.S. (2021). Implementation of Kinetic and Kinematic Variables in Ergonomic Risk Assessment Using Motion Capture Simulation: A Review. International journal of environmental research and public health, 18 (16), 8342. DOI: 10.3390/ijerph18168342
• Zocova, J. (2023). Categorization of work as a form of assessment of occupational health risks. State Institute of Health.