Selected mechanical and physical properties of ABS, PCV and PET finish

• Autorzy: Kowaluk G. , Boruszewski P. , Latosiński J.
• Języki publikacji: EN

Abstrakty

EN

Selected mechanical and physical properties of ABS, PCV and PET finish. The article describes the results of pull-off tests of chosen finishing materials: ABS edge bands fixed on particleboard’s and MDF narrow surfaces, as well as PCV and PET foils covering MDF panels. The connection between ABS band and MDF board is significantly better than between ABS and particleboard. There is no significant difference between the maximum force needed to pull-off PCV and PET foil, as well as for abrasive resistance of mentioned foils. The relative hardness of PET foils is significantly higher than for PCV foils.

Słowa kluczowe

EN

ABS; PCV; PET; foil; edge; particleboard; MDF; resistance; hardness

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2012
• Tom: No. 78
• Strony: 162--166
• Opis fizyczny: Bibliogr. 7 poz.

Twórcy

autor

Kowaluk G.

autor

Boruszewski P.

autor

Latosiński J.

Bibliografia

• 1.BARDAK S., SARI B., NEMLI G., KIRCI H., BAHAROGLU M. (2011): The effect of decor paper properties and adhesive type on some properties of particleboard. International Journal of Adhesion&Adhesives 31: 412–415
• 2.EN 312:2011 Particleboards – Specifications
• 3.KRYSTOFIAK T., LIS B., PROSZYK S., GAIDA P. (2011): Investigations upon some properties of surfaces of wood based materials finished with decorative foils in continuous technology. Ann. WULS-SGGW, Forestry and Wood Technology 74: 249-253
• 4.NEMLI G., COLAKOGLU G. (2004): The influence of lamination technique on the properties of particleboard. Building and Environment 40: 83–87
• 5.NEMLI G., KALAYCIOGLU H. (2006): The resistances of several types of overlaying materials against cigarette burn, scratch, and abrasion. Building and Environment 41: 640–645
• 6.NEMLI G., YILDIZ S., GEZER E. (2005): Effects of melamine raw paper weight, varnish type and the structure of continuous pressed laminate (CPL) on the physical, 165 166 mechanical properties and decay resistance of particleboard. International Biodeterioration & Biodegradation 56: 166–172
• 7.PN-EN ISO 7784-1:2006 Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-covered wheel method