Identification of temperature changes dynamics in selected castings as a contribution to performance life improvement

• Autorzy: Pytel A. , Pysz S.
• Języki publikacji: EN

Abstrakty

EN

Parameters describing boundary conditions and dynamics of temperature changes during casting cooling in foundry moulds and the successive performance, especially as regards the massive cast elements, were discussed. Considering the specific nature of casting operation, non-standard methods of examination of the isotherms of temperature fields on the casting surface were described to determine local overheating resulting from the technological process, chemical composition, properties of the currently applied insulation materials, casting defects and/or design. Identification of these parameters can be interpolated to laboratory conditions and to the validation of virtual models subject to computer simulation. The use in simulation of genetic algorithms combined with the results of measurements under real conditions enables more precise determination of the performance parameters, including critical states of stresses present in a structure. This should allow further optimisation of the massive castings design, considering the specific nature of a manufacturing process (alloy composition included), combined with performance parameters. Measures described here are expected to contribute to the reduced casting weight and longer time of operation.

Słowa kluczowe

EN

grey cast iron; vermicular graphite cast iron; cast plates; computer simulation; thermal fatigue

PL

żeliwo szare; żeliwo grafitowe wermikularne; płyty odlewane; symulacja komputerowa; zmęczenie cieplne

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 3
• Strony: 179--186
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Pytel A.

• Foundry Research Institute, Department of Ferrous Alloys, Zakopiańska Str. 73, 30-418 Kraków, Poland

autor

Pysz S.

• Foundry Research Institute, Centre for Design and Prototyping, Zakopiańska Str. 73, 30-418 Kraków, Poland

Bibliografia

• [1] E. Guzik, Procesy uszlachetniania żeliwa, Wybrane zagadnienia, Archiwum Odlewnictwa, Katowice (2001) 85-89.
• [2] Cz. Podrzucki, Żeliwo, Struktura Właściwości Zastosowanie, ZG STOP, Kraków (1991).
• [3] J. Zych, Wpływ molibdenu na odporność na zmęczenie cieplne żeliwa z grafitem płatkowym, wermikularnym i sferoidalnym, XX Konferencja Wydziału Odlewnictwa AGH, Kraków (1995) 93-98.
• [4] S. Dawson, Compacted graphite iron - a material solution for modern diesel engine cylinder blocks and heads, SinterCast, Sweden, China Foundry, vol.6 no.3, (8/2009) 241-246.
• [5] S. Pietrowski, Kompendium wiedzy o żeliwie wermikularnym, Krzepnięcie Metali i Stopów, Rocznik 2, Nr 44, PAN Katowice (2000), 279-292.
• [6] A. Pytel, K. Sękowski, Perlitic Vermicular Graphite Cast Iron; International Conference on Advances in Materials and Processing Technologies, AMPT 99, Dublin, Ireland (1999) 1381-1388.
• [7] A. Pytel, Zmęczenie cieplne i przemiana eutektoidalna żeliwa niskostopowego z grafitem wermikularnym, Międzynarodowa Konferencja Naukowa, Żeliwo sferoidalne XXI wieku, Instytut Odlewnictwa, Kraków (2003) II/49-II56.
• [8] T. Sjögren, Influences of the graphite phase on Elastic and plastic deformation Behaviour of cast irons; Department of Mechanical Engineering Component Technology – Castings School of Engineering; Jönköping University, (2007).
• [9] R.J. Warrick, G.G. Ellis, Development and application of enhanced compacted graphite iron for the bedplate of the new chrysler 4.7 liter v-8 engine; International Congress and Exposition, Detroit, Michigan, March 1-4, (1999).