PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Investigation on fire potential of ventilation ducts

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Fires in underground mines can create dangerous conditions for personnel and cause severe damage to property. Because of the confined nature of the underground environment, these effects can escalate rapidly. In underground mines, air ducts/bags are used for ventilating narrow blind headings; these consist of combustible materials that have not been investigated thoroughly in terms of their fire potential and gas emissions. The primary objective of this study is to investigate the fire potential and emission factors for these ducts. A preliminary investigation was performed using differential scanning calorimetry and thermogravimetric analysis. These tests provide crucial information for duct samples including the melting point which is used for designing a novel experimental setup for combustion analysis. This setup was used to perform a combustion experiment at 350 °C, so that all specimens can achieve complete combustion. Furthermore, the heat release rate and emission factors were calculated; it was observed that heat release rate for all the specimens was identical because of similar oxygen consumption during the experiment. Sample B has the lowest emission factor among the four samples (A, B, C, D) tested in this study.
Rocznik
Strony
270--276
Opis fizyczny
Bibliogr. 33 poz.
Twórcy
autor
  • Department of Mining Engineering and Management, South Dakota School of Mines and Technology, United States
autor
  • Department of Chemical and Biological Engineering, South Dakota School of Mines and Technology, United States
  • Department of Mining Engineering and Management, South Dakota School of Mines and Technology, United States
Bibliografia
  • 1. Ajitha, S. S., Bhargava, R., Pan, Y., Jha, A., Tukkaraja, P., Shahbazi, K., ... Loring, D. (2019). A preliminary experimental investigation of the airflow resistance of an evolving cave in a block/panel cave mine. Paper presented at the proceedings of the 11th international mine ventilation congress.
  • 2. Alagarsamy, P. (2016a). Differential scanning calorimetry, and thermogravimetric analysis. Characterization of Material, 2018. Retrieved May 20, 2019 from https://nptel.ac.in/courses/115103030/22.
  • 3. Alagarsamy, P. (2016b). Interpretation of TGA curves. Thermogravimetric analysis. Retrieved May 20, 2019 from https://nptel.ac.in/courses/115103030/23.
  • 4. Alagarsamy, P. (2016c). Thermogravimetric analysis. Module 4 : Thermal analysis, 2019. Retrieved May 20, 2019 from https://nptel.ac.in/courses/115103030/23.
  • 5. Arya, S., Novak, T., Saito, K., Levy, A., & Sottile, J. (2019). Empirical formulae for determining pressure drop across a 20-layer flooded-bed scrubber screen. Min. Metall. Explor. 1-9.
  • 6. Biteau, H., Steinhaus, T., Schemel, C., Simeoni, A., Marlair, G., Bal, N., et al. (2008). Calculation methods for the heat release rate of materials of unknown composition. Fire Safety Science, 9, 1165-1176. https://doi.org/10.3801/iafss.Fss.9-1165.
  • 7. Brake, D. (2013). Fire modelling in underground mines using ventsim visual Vent FIRE software. Paper presented at the Proceedings of the Australian mine ventilation conference, Adelaide, SA, Australia.
  • 8. Consulting, C. Ventsim Visual™ user guide In Vol. 1. Howden (Ed.).
  • 9. Conti, R. S. (2001). Responders to underground mine fires. Paper presented at the 32nd annual conference of the Institute on mining health safety and research, Salt lake city.
  • 10. Conti, R. S., Chasko, L. L., Wiehagen, W. J., & Lazzara, C. P. (2005). Fire response preparedness for underground mines. Retrieved May 24, 2019 from Cincinnati, Ohio https://www.cdc.gov/niosh/mining/UserFiles/works/pdfs/2006-105.pdf.
  • 11. Dozolme, P. (2019). Specific and non-specific hazards in underground mines. Retrieved May 24, 2019 from https://www.thebalancesmb.com/specific-and-non-specific-hazardsin-underground-mines2367338.
  • 12. Duckworth, I. (2008). Fires in vehicular tunnels. In K. Wallace (Ed.). Proceedings 12th US/North American mine ventilation Symposium, Reno (pp. 393-400). .
  • 13. Egan, M. R. (1990). Summary of combustion products from mine materials: Their relevance to mine fire detection. Information circular, Vol. 9272. Washington, DC: U.S. Bureau of Mines.
  • 14. Gangrade, V., Schatzel, S. J., & Harteis, S. P. A. (2019). A Field Study of Longwall Mine Ventilation Using Tracer Gas in a Trona Mine. Mining, Metallurgy & Exploration, 36(6), 1-11. https://doi.org/10.1007/s42461-019-0096-0.
  • 15. Hansen, R., & Ingason, H. (2013). Heat release rate measurements of burning mining vehicles in an underground mine. Fire Safety Journal, 61, 12-25. https://doi.org/10.1016/j.firesaf.2013.08.009.
  • 16. Jha, A., Calizaya, F., & Nelson, M. G. (2015). Spontaneous combustion prediction and remediation techniques. Paper presented at the 15th North American mine ventilation Symposium, Blacksburg.
  • 17. Jha, A., & Tukkaraja, P. (2019). Monitoring and assessment of underground climatic conditions using sensors and GIS tools. Paper presented at the 17th North American mine ventilation Symposium, Montreal.
  • 18. Kang, N., Qin, Y., Han, X., & Cong, B. (2019). Experimental study on heat release rate measurement in tunnel fires. Fire and Materials, 43(4), 381-392. https://doi.org/10.1002/fam.2710.
  • 19. Kumar, A. R., Wedding, W. C., Jolly, A., Arya, S., & Novak, T. (2016). Modeling capture efficiency for a flooded bed dust scrubber incorporated into a longwall shearer using a small scale physical model and CFD. Paper presented at the SME annual conference & Expo, phoenix, AZ.
  • 20. Laboratory, M. T. (2012). Differential Scanning Calorimetry (DSC) - online training course.
  • 21. Lazzara, C., & Perzak, F. (1990). Conveyor belt flammability studies. Proceedings: 21st Annual Institute on Coal Mining Health, Safety, and Research, 28-30.
  • 22. Maynard, T., Hosseini, E., Princevac, M., & Mahalingam, S. (2009). Laboratory-based experimental measurement of particulate emission factor for wildland fuels.
  • 23. McPherson, M. J. (2012). Subsurface ventilation and environmental engineering, Vol. I. New Delhi, India: Springer Science & Business Media.
  • 24. Mining Product: MFIRE. Retrieved June 4, 2019 from https://www.cdc.gov/niosh/mining/works/coversheet1816.html.
  • 25. MSHA (2019). U.S. mining fatalities in 2018 were second lowest on record. Retrieved June 4, 2019 from https://www.msha.gov/news-media/press-releases/2019/01/09/usmining-fatalities-2018-were-second-lowest-record.
  • 26. NIST Fire dynamics. Retrieved June 4, 2019 from https://www.nist.gov/el/fire-researchdivision-73300/firegov-fire-service/fire-dynamics.
  • 27. NIST Fire dynamics simulator (FDS) and smokeview (SMV). Retrieved June 8, 2019 from https://pages.nist.gov/fds-smv/.
  • 28. PerkinEmler, I. Thermogravimetric analysis (TGA). Retrieved June 8, 2019 from https://www.perkinelmer.com/lab-solutions/resources/docs/FAQ_Beginners-Guide-to-Thermogravimetric-Analysis_009380C_01.pdf.
  • 29. Prosser, B., Briones, S. V., Van Diest, J., Zuńiga, R. A., Marin, A. G., & Barrena, G. L. (2017). Development of A fire modeling study for the chuquicamata underground mine. Paper presented at the 16th North American mine ventilation Symposium, Golden,CO.
  • 30. Rosa, M. I. D. (2004). Analysis of mine fires for all U.S. Underground and surface coal mining categories: 1990-1999. Retrieved June 8, 2019 from https://www.cdc.gov/niosh/mining/UserFiles/works/pdfs/2004-167.pdf.
  • 31. Thermal Analysis Instruments (2010). Thermal analysis. Retrieved May 26, 2019 from http://www.tainstruments.com/wp-content/uploads/BROCH-THERMAL-2015-EN.pdf.
  • 32. Trevits, M. A., Yuan, L., Smith, A. C., & Thimons, E. D. (2008). NIOSH mine fire research in the United States. Paper presented at the Ninth International Mine Ventilation Congress, New Delhi.
  • 33. Wikipedia Differential scanning calorimetry 2019. Retrieved June 17, 2019 from https://en.wikipedia.org/wiki/Differential_scanning_calorimetry.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-957469b9-091b-4fa9-89bc-97843e19ce30
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.