PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The improvement of environmental characteristics of the combined cycle power plant by the implementation of the carbon capture installation

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper describes a combined cycle power plant with carbon capture installation in a post-combustion technology. Carbon dioxide is separated from flue gas by using a chemical absorption method with monoethanolamine (MEA) as a sorbent. Separated carbon dioxide is compressed in order to prepare for transportation to the storage place. This paper identifies the electric efficiencies and other characteristic parameters of power plants before and after implementation of CO2 capture installation, as well as the power plant efficiency drop, and the improvement of ecological characteristics related to the implementation of this installation. The implementation of the installation described herein is associated with the efficiency loss caused by the auxiliary power for additional installations. The CO2 separation installation is powered by heat energy required for reclaiming the sorbent. This energy is taken in the form of steam extracted from the steam cycle, thus reducing the steam turbine power output, while the CO2 compression installation is powered by electric energy.
Rocznik
Strony
19--24
Opis fizyczny
Bibliogr. 17 poz., rys., tab.
Twórcy
autor
  • Silesian University of Technology, Institute of Power Engineering and Turbomachinery 18 Konarskiego St., 44-100 Gliwice, Poland
autor
  • Silesian University of Technology, Institute of Power Engineering and Turbomachinery 18 Konarskiego St., 44-100 Gliwice, Poland
autor
  • Silesian University of Technology, Institute of Power Engineering and Turbomachinery 18 Konarskiego St., 44-100 Gliwice, Poland
Bibliografia
  • 1. CHMIELNIAK, T. (2008) Energy Technologies. Warsaw: WNT (in Polish).
  • 2. CHMIELNIAK, T. & WÓJCIK K. (2010) Capture and transport of CO2 from flue gas – energy effect and economic analysis. Rynek Energii. 91. 6. pp. 51–55 (in Polish).
  • 3. Directive 2009/29/EC of the European Parliament and of the Council of 23 April 2009 amending Directive 2003/87/EC so as to improve and extend the greenhouse gas emission allowance trading scheme of the Community. Official Journal of the European Union L 140/63, 5.6.2009.
  • 4. DUAN, L., ZHAO, M. & YANG, Y. (2012) Integration and optimization on the coal fired power plant with CO2 capture using MEA. Energy. 45. 1. pp. 107–116.
  • 5. European Commission (2014) Energy statistical pocketbook. [Online] Available from: http://ec.europa.eu/energy/ en/statistics/energy-statistical-pocketbook [Accessed: 25th June 2015].
  • 6. GateCycle Version 5.40. Manual. GE Enter Software, LLC.
  • 7. ISO (2009) ISO 2314:2009 Standard: Gas turbines – Acceptance tests.
  • 8. JONSSON, M., BOLLAND, O., BÜCKER, D. & ROST, M. (2005) Gas turbine cooling model for evaluation of novel cycles. Proc. of ECOS 2005. Trondheim. Norway. 20–22 June 2005. pp. 641–650.
  • 9. KOHL, A.L. & NIELSEN, R.B. (1997) Gas purification. Houston: Gulf Publishing Company.
  • 10. KOTOWICZ, J. (2008) Combined cycle power plants. Lublin: Kaprint (in Polish).
  • 11. KOTOWICZ, J. & BARTELA, Ł. (2012) Optimisation of the connection of membrane CCS installation with a supercritical coal-fired power plant. Energy. 38. 1. pp. 118–127.
  • 12. KOTOWICZ, J. & JANUSZ, K. (2007) Manners of the reduction of the emission CO2 from energetic processes. Rynek Energii. 68. 1. pp. 10–18 (in Polish).
  • 13. KOTOWICZ, J., JOB, M. & BRZĘCZEK, M. (2015) The Characteristics of Ultramodern Combined Cycle Power Plants. Energy (doi: 10.1016/j.energy.2015.04.006).
  • 14. MAURSTAD, O. (2005) An overview of coal based integrated gasification combined cycle (IGCC) technology. September 2005, MIT LFEE 2005-002 WP.
  • 15. REMIORZ, L. (2014) Detecting disturbance of uniformity of a nitrogen and CO2 mixture in an acoustic tube. Journal of Power Technologies. 94. pp. 226–231.
  • 16. SANJAY, Y., SINGH, O. & PRASAD, B.N. (2008) Influence of different means of turbine blade cooling on the thermodynamic performance of combined cycle. Applied Thermal Engineering. 28. pp. 2315–2326.
  • 17. SZARGUT, J. & ZIĘBIK, A. (1988) Fundamentals of thermal energy. Warsaw: PWN (in Polish).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-955b1d60-9b96-4ce9-9b1d-066748255ea6
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.