Computer-aided support for the rapid creation of parametric models of milling units for longwall shearers

• Autorzy: Bołoz Ł. , Castañeda L. F.

Identyfikatory

DOI

10.1515/mspe-2018-0031

• Języki publikacji: EN

Abstrakty

EN

The cutting drums are the basic working components of many mining machines. The article focuses on differences in the design of cutting drums depending on the expected working conditions. Then, the unique calculation procedure is presented which allows to determine the load on the unit by reducing the forces acting on a single pick, taking into account the picks bent on the cut-off disc. Until now, this has been omitted in the literature. The results of the calculations for the selected cutting drum performed in MATLAB are also presented. The further section proposes to use Autodesk Inventor Professional's iLogic Tool for quick modelling of cutting drums. The principles of creating parameterized models and compositions using programming elements in the form of iLogic scripts are presented. The articles presented a ready-made units generator, taking into account the possibility to determine values of selected numerical parameters of the unit: diameter, web, number of patches and cutting pitch. The generator also allows you to select the type of pick holders, conical pick types, as well as the choice of pick system for repositioning or matching picks.

Słowa kluczowe

EN

cutting drums; computer-aided support; units generator; unit load; parametric modelling; iLogic; Audodesk Inventor Professional

• Wydawca: STE GROUP
• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2018
• Tom: nr 4 (26)
• Strony: 193--199
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Bołoz Ł.

• AGH University of Science and Technology Department of Mining, Dressing and Transport Machines A. Mickiewicza Av. 30, 30-059 Kraków, Poland

autor

Castañeda L. F.

• GEMI research group Universidad EAFIT Carrera 49 No. 7 Sur-50, office 13-104, Medellín, Colombia

Bibliografia

• [1] W. Biały. “Wpływ rozmieszczenia noży na dynamikę pracy głowicy urabiającej”. Mechanizacja i Automatyzacja Górnictwa, no. 11, pp. 29-38, 2002.
• [2] Ł. Bołoz. “Unique project of single-cutting head longwall shearer used for thin coal seams exploitation”. Archives of Mining Sciences, vol. 58, no. 4, pp. 1057-1070, 2013.
• [3] Ł. Bołoz. “Kombajnowy kompleks ścianowy przeznaczony do pracy w niskich ścianach”. Przegląd Górniczy, no. 6, pp. 91-97, 2016.
• [4] J. Gajewski, L. Jedlinski and J. Jonak. “Classification of wear level of mining tools with the use of fuzzy neural Network”. Tunnelling and Underground Space Technology, vol. 35, pp. 30-36, 2013.
• [5] K. Kotwica. “The influence of water assistance on the character and degree of wear of cutting tools applied in roadheaders”. Archives of Mining Sciences, vol. 5, no. 3, pp. 353-374, 2011.
• [6] K. Krauze. Urabianie skał kombajnami ścianowymi. Katowice: Wydawnictwo Naukowe Śląsk, 2002.
• [7] K. Krauze, T. Wydro and Ł. Bołoz. “Frezujące organy maszyn urabiających”. Przegląd Górniczy, no. 3, pp. 52-57, 2009.
• [8] K. Krauze, Ł. Bołoz and T. Wydro. “Parametric factors for the tangential – rotary picks quality assessment”. Archives of Mining Sciences, vol. 60, no. 1, pp. 265- 281, 2015.
• [9] K. Krauze, Ł. Bołoz and T. Wydro. “Opis jakości noży styczno-obrotowych wskaźnikami parametrycznymi”. Przegląd Górniczy, no. 6, pp. 1-8, 2017.
• [10] X. Li, S. Wang, S. Ge, R. Malekian, Z. Li and Y. Li. “A study on drum cutting properties with full-scale experiments and numerical simulations”. Measurement, vol. 114, pp. 25-36, 2018.
• [11] M. Ťavodová, J. Krilek, A. Perec, D. Kalincova and J. Kovac. “Analysis of the wear of saw blade teeth and the proposal of methods of increasing their wear resistance”. Modern Machinery Science Journal, no. 5, pp. 1287-1291, 2016.
• [12] M. Ťavodová, D. Kalincová, M. Hnilicová and R. Hnilica. “The influence of heat treatment on tool properties malcher”. Manufacturing Technology, vol. 16, no. 5, pp. 1169-1173, 2016.
• [13] S.H. Wang, S. Melendez, C.S. Tsai and C.W. Wu. “Parametric Design and Design Associability in 3D CAD”. Materials Science Forum, vol. 594, pp. 461-468, 2008.
• [14] A. Zhang. “Teaching computer aided product design with aesthetic considerations”, in Proc. of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 3, 2005, pp. 581-584.
• [15] B. Żółtowski, L.P. Castaneda, M. Żółtowski, K. Napieraj, J Wachowicz and R. Bielski. “Multidimensional Monitoring System of State Machines”, in Proc. of the 5th International Conference on Applied Innovations in IT, vol. 5, 2017, pp. 101-107.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).