Effect of superfinishing methods kinematic features on the machined surface

• Autorzy: Kacalak W. , Tandecka K.
• Języki publikacji: EN

Abstrakty

EN

The carried out research of the processes for the treatment of superfinishing with the application of microfinishing films of IMFF type with heaping the grain from the alundum with the nominal size of 15 micrometers for the different cinematic system proved that the topography of surface after smoothening depends on the cinematic features of process. It is demonstrated that the machining with oscillation can be substituted and the similar effects can be obtained as a result of the deviation from the parallelism of the directions of object feed and foil feed. This means the possibility to apply the super finisher attachments with a simpler building.

Słowa kluczowe

EN

superfinishing; microfinishing film; surface topography

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2012
• Tom: Vol. 12, No. 4
• Strony: 35--48
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Kacalak W.

• Koszalin University of Technology, Division of Precision Mechanics, Raclawicka 15-17, 75-620 Koszalin, Poland

autor

Tandecka K.

• Koszalin University of Technology, Division of Precision Mechanics, Raclawicka 15-17, 75-620 Koszalin, Poland

Bibliografia

• [1] AUGUSCINSKI A., WEISS E., 1994, Influence on processing parameters on the abrasive effect of superfinishing films, XVII Naukowa Szkoła Obrobki Sciernej, Krakow, (in Polish).
• [2] KACALAK W., TANDECKA K., 2011, Metrological aspects of evaluation of diamond abrasive film topography for precise microfinishing, Pomiary Automatyka Kontrola, 57/ 5, 531-534, (in Polish).
• [3] KACALAK W., TANDECKA K., 2010, Methodology of assessment abrasive film topography with particular emphasis on distribution of the abrasive grains, Podstawy i technika obrobki sciernej, Materiały XXXIII Naukowej Szkoły Obrobki Sciernej, Lodz, 193-205, (in Polish).
• [4] KACALAK W., TANDECKA K., 2010, Methodology of analysis of the active surface topography abrasive film, Podstawy i technika obrobki sciernej, Materiały XXXIII Naukowej Szkoły Obrobki Sciernej, Lodz, 177-193, (in Polish).
• [5] KACALAK W., SZAFRANIEC F., TOMKOWSKI R., LIPINSKI D., LUKIANOWICZ C., 2011, Methodology for evaluation of classification abilities of parameters characterizing stereometry features of surface irregularities, Pomiary Automatyka Kontrola, 57/5, 542-547, (in Polish).
• [6] KROLIKOWSKI T., BALASZ B., 2009, Modeling and evaluation of grinding force components during the cutting process with single grain, Pomiary Automatyka Kontrola, 4, 259-262, (in Polish).
• [7] WOJTUSZKIEWICZ K., 2007, Devices of computer technology, Wydawnictwo Naukowe PWN, Warszawa, (in Polish)