Determination of Uniaxial Tensile Behavior of Hypodermis in Porcine Skin Based on Rule of Mixtures

• Autorzy: Choi Junsuk , Kim Sanghoon , Rhim Sungsoo , Rhee Kyong-Yop

Identyfikatory

DOI

10.24425/amm.2019.127565

• Języki publikacji: EN

Abstrakty

EN

In this study, we investigate the mechanical behavior of each skin layer, in terms of the nominal stress-strain curve by uniaxial tensile tests using specimens of porcine skin in two forms: dermis containing epidermis, and all three layers. All tests were performed under cyclic loading at the constant strain rate of 10^-3 s^-1 at ambient temperature. To measure the precise initial crosssectional areas of each layer, the thickness of each skin layer was quantified by counting the number of pixels on the photo-image using image-processing software. In the tensile test, force-strain curves of the total skin and dermis with epidermis were obtained. Subsequently, a rule of mixtures was applied to determine the nonlinear mechanical properties of the hypodermis layer. In conclusion, we could define the uniaxial tensile behavior of the hypodermis, and additionally predict the weight effect of the dermis and hypodermis layers in the tensile test.

Słowa kluczowe

EN

porcine skin; skin layers; visco-hyperelastic; constitutive model

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 2
• Strony: 491--494
• Opis fizyczny: Bibliogr. 10 poz., fot., rys., wzory

Twórcy

autor

Choi Junsuk

• Kyung Hee University, College of Engineering, Department of Mechanical Engineering, 1732 Deokyoungdaero, Giheung-Gu, Yongin-Si, Gyeonggi 17104, Korea

autor

Kim Sanghoon

• Kyung Hee University, College of Engineering, Department of Mechanical Engineering, 1732 Deokyoungdaero, Giheung-Gu, Yongin-Si, Gyeonggi 17104, Korea

autor

Rhim Sungsoo

• Kyung Hee University, College of Engineering, Department of Mechanical Engineering, 1732 Deokyoungdaero, Giheung-Gu, Yongin-Si, Gyeonggi 17104, Korea

autor

Rhee Kyong-Yop

• Kyung Hee University, College of Engineering, Department of Mechanical Engineering, 1732 Deokyoungdaero, Giheung-Gu, Yongin-Si, Gyeonggi 17104, Korea

Bibliografia

• [1] J. M. Benitez, F. J. Montans, 2017. Comput. Struct. 190, 75-107 (2017).
• [2] J.W.Y. Jor, M. P. Nash, P.M.F. Nielsen, P. J. Hunter, Biomech. Model. Mechanobiol. 10, 767-778 (2011).
• [3] J.W.Y. Jor, M. D. Parker, A. J. Taberner, M. P. Nash, P.M.F. Nielsen, Wiley Interdiscip. Rev. Syst. Biol. Med. 5, 539-556 (2013).
• [4] W. Li, Biomed. Eng. Lett. 5, 241-250 (2015).
• [5] S. Kut, G. Ryzińska, B. Niedziałek, Arch. Metall. Mater. 62 (2), 523-530 (2017).
• [6] S. Nicolle, J. Decorps, B. Fromy, J.-F. Palierne, J. Mech. Behav. Biomed. Mater. 69, 98-106 (2017).
• [7] D. Remache, M. Caliez, M. Gratton, S. Dos Santos, J. Mech. Behav. Biomed. Mater. 77, 242-249 (2018).
• [8] P. G. Agache, C. Monneur, J. L. Leveque, J. De Rigal, Arch. Dermatol. Res. 269, 221-232 (1980).
• [9] L. C. Gerhardt, A. Lenz, N. D. Spencer, T. Münzer, S. Derler, Ski. Res. Technol. 15, 288-298 (2009).
• [10] D. C. Salter, H. C. McArthur, J. E. Crosse, A. D. Dickens, Int. J. Cosmet. Sci. 15, 200-218 (1993).

Uwagi

EN

1. This research was supported by the Technology Innovation Program (10084657) funded By the Ministry of Trade, Industry & Energy (MOTIE, Korea). It was also financially supported by the Basic Science Research Program under contract numbers 2017R1A6A3A11028683 (S. Kim) funded by the Ministry of Education (Korea).

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).