Application of Knowledge Engineering methods in Electrical Engineering - A hypothesis for potential TRIZ usage

• Autorzy: Mansoor M. , Mariun N. , Ismail N. , Abdulwahab N.I.

Warianty tytułu

PL

Aplikacja metod inżynierii wiedzy w elektrotechnice – hipoteza dla potencjalnego zastosowania metody TRIZ

• Języki publikacji: EN

Abstrakty

EN

Increasing need of innovative solutions for existing engineering systems has brought interest of engineers towards systematic innovation. While highlighting effective use of Artificial intelligence (AI) tools, the potential for emerging approach of knowledge engineering- Theory of inventive problem solving (TRIZ) has been discussed in this paper. This review seeks to affirm the potential application of knowledge engineering emerging tools, for effective solution hunting space in electrical engineering problems. An extensive collection of literature has been covered to develop the hypothesis about benefits of systematic innovation for electrical engineers. Merits of innovative and systematic approach over traditional solution approach in existing industries are highlighted through reference of scientific literature.

PL

W artykule omówiono metodę TRIZ służącą do tworzenia nowych innowacyjnych pomysłów i rozwiązywania problemów. Skupiono się na zastosowaniu metody w systemach elektrotechnicznych. Przedstawiono, popartą literaturą analizę pozytywnych wpływów metody TRIZ na elektrotechnikę. Wykazano przewagę innowatyki i systematyki nad podejściem tradycyjnym w przemyśle.

Słowa kluczowe

EN

knowledge engineering; TRIZ; innovation; electrical systems

PL

inżynieria wiedzy; TRIZ; systemy elektryczne

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2013
• Tom: R. 89, nr 5
• Strony: 147--151
• Opis fizyczny: Bibliogr. 99 poz.

Twórcy

autor

Mansoor M.

• Faculty of Engineering, University Putra Malaysia (UPM)

autor

Mariun N.

• Faculty of Engineering, University Putra Malaysia (UPM)

autor

Ismail N.

• Faculty of Engineering, University Putra Malaysia (UPM)

autor

Abdulwahab N.I.

• Faculty of Engineering, University Putra Malaysia (UPM)

Bibliografia

• [1] F.Y. Zhang, Y.S. Xu, Q.P. He, Research on product systematic innovative design based on TRIZ, Materials Science Forum, 2006, pp. 532-533:761-764
• [2] J. Emblemsvåg, B. Bras, Process thinking — a new paradigm for science and engineering, Futures, vol.32 n.7, 2000, pp. 635-654
• [3] J. Lee, T. Kim, E. Heo, Technical progress verses efficiency gain in manufacturing sectors, Review of Development Economics, vol.2, 1998, pp. 268-281.
• [4] Webb, TRIZ: an inventive approach to invention, Engineering Management Journal, vol.12 n.3, 2002, pp.117-124.
• [5] Chulvi, R. Vidal, TRIZ on design-oriented knowledge-based systems, The TRIZ-Journal, vol.3 n.2, March 2009.
• [6] D. Fensel and K. Siorpaes, Intelligent systems ‘ CommonKADS’, Reterieved from http://www.stiinnsbruck.at/sites/default/files/courses/fileadmin/documents/intelsys09-10/06_Intelligent_Systems-CommonKADS.pdf
• [7] Y. Mizrachi, Don't Predict the Future–Direct it! Comments on the intellectual history, the Logical and Applicative Visibility, and the Underlying Assumptions of Directed Evolution (DE), World Futures, vol.66 n.1, 2009, pp. 26-52.
• [8] W.R. Anis, M.M. Morcos, Artificial Intelligence and Advanced Mathematical Tools for Power Quality Applications: A Survey, IEEE Trans. on power delivery, vol.17 n.2, 2002, pp.668 – 673.
• [9] P.R. Apte, Introduction to TRIZ Innovative Problem Solving, Online Consultancy notes. Retrieved from http://www.ee.iitb.ac.in/~apte/CV_PRA_TRIZ_INTRO.htm
• [10] D. Mann, Hands on systematic innovation (CREAX Press, Belgium, 2002)
• [11] M. Mansoor, Towards A Model/Framework for Optimizing Automated Engineering Systems in Developing Countries, The annual conference of the Altshuller Institute, TRIZCON 2008, Kent State University, Ohio USA.
• [12] Preece, A. Flett, D. Sleeman, D. Curry, N. Meany, P. Perry, Better knowledge management through knowledge engineering, Intelligent Systems, IEEE , vol.16 n.1, 2001, pp.36-43.
• [13] Y. Xiaohui, To Facilitate Knowledge Management Using Basic Principles of Knowledge Engineering, Proceedings of Pacific-Asia Conference on Knowledge Engineering and Software Engineering, 2009, pp.94-97.
• [14] P.F. Bariani, G.A Berti, G. Lucchetta, A combined DFMA and TRIZ approach to the simplification of product structure, Proceedings of the Institution of Mechanical Engineers, Part B: J. of Engineering Manufacture, vol.218 n.8, 2004, 1023–1027.
• [15] K. Barry, E. Domb, M.S. Slocum, What is TRIZ?, Online Introductory notes at The TRIZ Journal. 2007. Retrieved from http://www.triz-journal.com/archives/what_is_triz/
• [16] G. Cascini, P. Rissone, Plastics design: Integrating TRIZ creativity and semantic knowledge portals, Journal of Engineering Design, vol.15 n.4, 2004, pp.405–424.
• [17] P. Filmore, A Comparison of the Problem Solving and Creativity Potential of Engineers between using TRIZ and Lean/ Six Sigma, Fourth TRIZ Symposium in Japan 2008, Laforet Biwako, Moriyama City, Shiga Prefecture, Japan.
• [18] K. James, 17 secrets of inventive mind: how to conceive world class products rapidly using TRIZ and other leading edge creative tools, The TRIZ Journal, vol.11n.b, Nov 1996.
• [19] Krasnoslobodtsev, J.U Lee, J.B. Lee, TRIZ improvement of rotary compressor design, The annual conference of the Altshuller Institute, TRIZCON2005, 2005, Brighton, MI USA.
• [20] K. Lakshminarayanan, Holistic Value Framework – Creating Right Value Streams Using TRIZ and Other Concepts, The TRIZ Journal, vol.1 n.2, Jan 2007.
• [21] X. Zhang, D. Chen, A conceptual design approach generated by integrating AD and TRIZ into the conceptual design phase of SAPB, Advanced Materials Research, 2010, pp.118-120:977-981.
• [22] T.C. Hsia, S.C Huang, Using the Theory of Inventive Problem-Solving (TRIZ) to implement safety improvements in foundry engineering pouring procedures, International Conference on Management and Service Science, 2011, pages 1-4.
• [23] S. Liu, D. Shi, Y. Zhang, A Planning Approach of Engineering Characteristics Based on QFD-TRIZ Integrated, Third IFIP WG 5.4 working conference on growth and development of computer-aided innovation, IFIP Advances in Information and Communication Technology, 2009, 304, pp.117-126
• [24] D. Akay, A. Demıray, M. Kurt, Collaborative tool for solving human factors problems in the manufacturing environment: The Theory of Inventive Problem Solving Technique (TRIZ) method, International Journal of Production Research, vol.46 n.11, 2008, pp.2913-2925.
• [25] S. Madan, K.E. Bollinger, Applications of artificial intelligence in power systems, Elect. Power Syst. Res., vol.41, 1997, pp.117–131.
• [26] J.A Momoh, M.E El-Hawary, Electric Systems, Dynamics, and Stability With Artificial Intelligence Applications (Marcel Dekker, New York, 2000)
• [27] B.K. Bose, Expert system, fuzzy logic, and neural network applications in power electronics and motion control, Proc. IEEE, vol.82, 1994, pp.1303–1323.
• [28] W.R. Anis, M.M. Morcos. Electric power quality and artificial intelligence: Applicability and overview, Proc. Large Eng. Syst. Conf. Power Eng., 1998/1999a, Halifax, Canada, pp. 107–111.
• [29] J.J. Burke, D.C. Grifith, J. Ward, Power quality—Two different perspectives, IEEE Trans. Power Delivery, vol.5, 1990, pp.1501–1513.
• [30] F. Koçyigit, E. Yanıkoglu, A.S. Yilma, M. Bayrak, Effects of power quality on manufacturing costs in textile industry, Scientific Research & Essay, vol.4 n.10, 2009, pp.1085-1099.
• [31] E. Vine, Breaking down the silos: the integration of energy efficiency, renewable energy, demand response and climate change, Energy Efficiency, vol.1, 2008, pp.49–63.
• [32] D.J. Ward, Power quality and the security of electricity supply, Proceedings of the IEEE, vol.89 n.12, 2001, pp1.830 - 1836.
• [33] F. Maghsooflou, R. Masiello, T. Ray, Energy Management Systems, IEEE Power&Energy Mag. vol.2 n.5, 2004, pp.49-52.
• [34] R.W. Pike, Optimization for Engineering Systems. 2001. Online book pages retrieved from http://www.mpri.lsu.edu/bookindex.html
• [35] R. Shirwaiker, G.E. Okudan, TRIZ and Axiomatic Design: A Review of Case-Studies and a Proposed Synergistic Use, J. of Intelligent Manufacturing, Vol. 19, 2008, pp. 33-47.
• [36] T. Pfeifer, M. Tillmann, Innovative Process Chain Optimization - Utilizing the Tools of TRIZ and TOC for Manufacturing, ETRIA World Conference- TRIZ Future 2003, Aachen, Germany.
• [37] P. Nisanov, Theory of Inventive Problem Solving (TRIZ); Creativity as an Exact Science, 2004, Online notes Retrieved from http://www.nisanov.com/presentation/triz/ (Last visited 25 Apr 2012)
• [38] A.H.M Kermani, Empowering Six Sigma methodology via the Theory of Inventive Problem Solving (TRIZ), The TRIZ Journal, Vol.12 n.8, Dec 2003.
• [39] Isixsigma.com, Six Sigma - What is Six Sigma?, Online notes Retrieved from http://www.isixsigma.com/index.php?option=com_k2&view=item&id=1463:what-is-six-sigma?&Itemid=155
• [40] Lean Enterprise Institute, What is Lean?, Online notes Retrieved from http://www.lean.org/whatslean/
• [41] F.Y. Zhang, H.C. Zhang, H. Zheng, Q.Q. Zhang, Energy-saving product innovative design process based on TRIZ/AD, IEEE 17th International Conference on Industrial Engineering and Engineering Management, IE and EM 2010: pp 325-328, Oct 29 - 31, 2010, Xiamen, China.
• [42] D. Shi, S. Liu, Enhancing the ideality of innovation by AD/TOC/TRIZ, Key Engineering Materials, vol.450, 2011, pp.145-148
• [43] K. Yang, H. Zhang, Compatibility analysis and case studies of axiomatic design and TRIZ, The TRIZ Journal,vol.9 n.c, Sep 2000.
• [44] Song, T.S. Yeoh, T.J. Yeoh TJ, Case study application of triz tools – strengths &weaknesses, Intel Technology Sdn. Bhd. Penang, Malaysia. Retrieved from http://www.aitriz.org/articles/InsideTRIZ/30383130-536F6E67.pdf
• [45] M. Asif, How to survive the energy crisis in Pakistan, Article in Daily Dawn, 19/3/2008. Retrieved from http://www.opfblog.com/1154/how-to-survive-the-energy-crisisin-pakistan/
• [46] R.W. Donald, Energy Efficiency Manual (Energy Institute Press, Wheaton, Maryland U.S.A, 1999)
• [47] Bureau of Energy Efficiency, Pakistan Energy & Environment Management Centre: Energy Management and Audit, Online archives Retrieved from http://www.peemac.com/Energy%20audit/Books/Book1/1Ch3.pdf
• [48] C. John, G. Van, C.E.M, Using Key Performance Indicators To Manage Energy Costs, Twenty-Seventh Industrial Energy Technology Conference 2005, 2005, New Orleans, LA.
• [49] Turner, J.K William, Guide to energy management (5th edition, The Fairmont Press, USA, 2006)
• [50] P. Jaramillo P, J. Marriott, D.H. Matthews, How Much Electricity Do You Use? An Activity to Teach High School Students about Energy Issues, IEEE International Symposium on Electronics and the Environment 2008, 2008, San Francisco, CA, Pages 1-5.
• [51] R. Malik, S. Barthel, Energy Efficiency, its Benefits and Methods to close the Efficiency gap, Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2008, 2008, pp 417-422.
• [52] B. Kroposki, C. Pink, R. DeBlasio, H. Thomas, M. Simoes, P.K. Sen, Benefits of Power Electronic Interfaces for Distributed Energy Systems, IEEE transactions on energy conversion, vol.25 n.3, 2010, pp.901-908
• [53] A.M. Munoz, J.J. Rosa, J.M. Arias, F.J. Outerino, A.G. Castro, Energy efficiency criteria in uninterruptible power supply selection, Applied Energy, vol.88 n.4, 2011, 1312-1321.
• [54] R. Banos, F.M. Agugliaro, F.G. Montoya, C. Gil, A. Alcayde, J. Gomez, Optimization methods applied to renewable and sustainable energy: A review, Renewable and Sustainable Energy Reviews, vol.15 n.4, 2011, pp.1753-1766.
• [55] Garg, J. Maheshwari, D. Mahapatra, S. Kumar, Economic and environmental implications of demand-side management options, Energy Policy, vol.39, 2011, pp.3076–3085
• [56] M.D. Levine, J.G. Koomey, L. Price, H. Geller, S. Nadel, Electricity end-use efficiency: Experience with technologies, markets, and policies throughout the world, Energy, vol.20 n.1, 1995, pp.37-61.
• [57] Pina, C. Silva, P. Ferrão, The impact of demand side management strategies in the penetration of renewable electricity, Energy, 2011, pp.1-10
• [58] D. Saxena, K.S. Verma, S.N. Singh, Power quality event classification: an overview and key issues, International Journal of Engineering, Science and Technology, vol.2 n.3, 2010, pp.186-199.
• [59] J. Arrillaga, N.R. Watson, S. Chen, Power System Quality Assessment (Wiley, New York, 2000)
• [60] S. Santoso, J. Lamoree, W.M. Grady, E.J. Powers, S.C. Bhatt, Scalable PQ event identification system, IEEE Trans. Power Delivery, vol.15, 2000, pp. 738–743.
• [61] N.R. Watson, Power quality in Smart Grids, International Rev. of Electrical Engineering, vol.6 n.6, 2011, pp.2684-2688
• [62] G. Mazur, Theory of Inventive Problem Solving (TRIZ), 1995, Online notes Retrieved from http://www.mazur.net/triz
• [63] U. Mishra, TRIZ tools and techniques, Online notes Retrieved from http://www.trizsite.tk/trizsite/triztools/default.asp
• [64] Rossi, Muzi, An introduction to TRIZ, Online notes Retrieved from http://www.know-it-project.eu /docs/TRIZ_introduction_en.pdf (Online PowerPoint presentation -
• [65] J. Terninko, E. Domb, J. Miller, The Seventy-six Standard Solutions, with Examples, The TRIZ Journal,vol.2 n.g, Feb 2000.
• [66] G.M. Bonnema, The Engineers’ Innovation Toolkit, Proceedia Engineering, vol.9, 2011, pp.345-354.
• [67] De Carvalho, A. Marco, Effective New Product Ideation: Ideatriz methodology. growth and development of computer-aided innovation - Third IFIP WG 5.4 working conference, CAI 2009, IFIP Advances in Information and Communication Technology, vol.304, 2009, pp.127-140.
• [68] L. Collins, Opening up the innovation process, Engineering Management Journal , vol.6 n.1, 2006, pp.14-17.
• [69] Q. Ming, S. Beilei, Design of the Knowledge Management Integrated System Based on TRIZ, Proceedings of International Symposium on Electronic Commerce and Security, 3-5 August, 2008, pp:1055-1058.
• [70] S. Rahman, Artificial intelligence in electric power systems: A survey of the Japanese industry, IEEE Trans. Power Syst., vol.8, 1993, pp.1211–1218.
• [71] C.C. Liu, R. Dahlgren, Intelligent systems applications in a competitive power industry environment, Proc. Of IEE 4th Int. Conf. Adv. Power Syst. Contr., Oper., Manage., 1997, Hong Kong, pp:24–29.
• [72] W.R. Anis, M.M. Morcos, Electric power quality and artificial intelligence: Applicability and overview, IEEE Power Eng. Rev., vol.19, 1999b, pp.63–65.
• [73] N. Gupta, S.P. Singh, S.P. Dubey, D.K. Palwalia, Fuzzy logic controlled three-phase three-wired shunt active power filter for power quality improvement, International Review of Electrical Engineering, vol.6 n.3, May 2011, Pages 1118-1129
• [74] P.K. Dash, S. Mishra, M.M.A. Salama, A.C. Liew, Classification of power system disturbance using a fuzzy expert system and a Fourier linear combiner, IEEE Trans. Power Delivery, vol.15, 2000, pp.472–477.
• [75] W.R.A. Ibrahim, M.M. Morcos, D.G. Kreiss, An adaptive neurofuzzy intelligent tool and expert system for power quality analysis— Part I: An introduction, Proc. of IEEE Power Eng. Soc. Summer Meeting, vol.1, 1999, pp.493-498, Edmonton, AB, Canada.
• [76] W.R.A. Ibrahim, M.M. Morcos, An adaptive neuro-fuzzy intelligent tool and expert system for power quality analysis— Part II: Validation and preliminary applications, Proc. Of Large Eng. Syst. Conf. Power Eng., 2000, 182–186, Halifax, Canada.
• [77] W.R.A. Ibrahim, M.M. Morcos, Preliminary application of an adaptive fuzzy system for power quality diagnostics, IEEE Power Eng. Rev., vol.20 n.1, 2000, pp.55–58.
• [78] W.R..A Ibrahim, M.M. Morcos, An adaptive fuzzy self-learning technique for prediction of abnormal operation of electrical systems, IEEE Transactions on Power Delivery, vol.21 n.4, 2006, pp.1770-1777.
• [79] W.R.A Ibrahim, M.M. Morcos, A power quality perspective to system operational diagnosis using fuzzy logic and adaptive techniques, IEEE Transactions on Power Delivery, vol.18 n.3, 2003, pp.903- 909.
• [80] D. Kavitha, A.F. Zobaa, P. Renuga, V. Suresh Kumar, NSGA-II optimized neural network controlled active power line conditioner under non-sinusoidal conditions, International Rev. of Electrical Engineering, vol.6 n.5, 2011, pp.2604-2610
• [81] V.G. Kinhal, P. Agarwal, H.O. Gupta, Performance Investigation of Neural-Network-Based Unified Power-Quality Conditioner, IEEE Transactions on Power Delivery, vol.26 n.1, 2011, pp.431-437.
• [82] N. Salman, A. Mohamed, H. Shareef, S.P. Ghoshal, Optimal network reconfiguration for voltage sag mitigation in distribution systems using improved genetic algorithm, International Review of Electrical Engineering, vol.6 n.3, May 2011, pp.1356-1364
• [83] J.Y. Dantan and A.J. Qureshi , Worst-case and statistical tolerance analysis based on quantified constraint satisfaction problems and Monte Carlo simulation, Computer-Aided Design, Vol. 41 n.1, 2009, pp. 1–12.
• [84] G. Levitin, A. Kalyuzhny, A. Shenkman, M. Chertkov, Optimal capacitor allocation in distribution systems using genetic algorithm and a fast energy loss computation technique, IEEE Trans. Power Delivery, vol.15, 2000, pp.623–628.
• [85] E.S. Karapidakis, N.D. Hatziargyriou, On-Line Preventive Dynamic Security of Isolated Power Systems Using Decision Trees, Power Engineering Review, IEEE , vol.22 n.4, 2002, pp.75.
• [86] M.S. Ayala, G.J. Botura, O.A. Maldonado, An AI tool for supervising substations, Potentials, IEEE , vol.20 n.5, Dec 2001/Jan 2002, pp.13-18.
• [87] F. László, TRIZ-ARIZ in transformer-type fault current limiter development, Future TRIZ Conference 2008, 2008, University of Twente, Enschede, Netherlands.
• [88] S. Wakaiki, K. Adachi, H. Kotaki, Practical application of TRIZ to novel electrical devices Development, Japan TRIZ Society 4Th TRIZ Symposium 2008, 2008, Laforet Biwako, Japan.
• [89] H. Zheng, H.C. Zhang, F.Y. Zhang, An innovative design of energy-saving products based on QFD/TRIZ/DEA integration, Proceedings of IEEE 17th International Conference on Industrial Engineering and Engineering Management, IE & EM 2010, pp.831-834, Oct 29- 31, 2010, Xiamen, China.
• [90] M. Randall, V.D.T Rob, 40 Principles of TRIZ and the Electric Power Grid, The TRIZ Journal, vol.2 n.2, Feb 2010.
• [91] G.R. Ferris, P.L. Perrewé, A.L. Ranft, R. Zinko, J.S. Stoner, R.L. Brouer, M.D. Laird, Human resources reputation and effectiveness, Human Resource Management Review, vol.17 n.2, 2007, pp.117-130.
• [92] Huselid, The impact of human resource management practices on turnover, productivity, and corporate financial performance, Academy of Management Journal, vol.38 n.3, 1995, pp.635–672.
• [93] C. Stan, T. Michael, H. Jack, 40 Principles with Examples: Human Factors & Ergonomics, The TRIZ Journal, vol.2 n.3, Feb 2010.
• [94] P. Filmore, Developing highly effective engineers, Proceedings of third TRIZ symposium, 2007, Yokohama, Japan.
• [95] D.H. Kim, The link between organizational and individual learning, Sloan Management Review, Fall 1993, pp.37-50.
• [96] S. Gahide, M.S. Slocum, T.G. Clapp, Application of TRIZ to Technology Forecasting – Case Study: Yarn Spinning Technology, The TRIZ Journal, vol.7 n.4, July 2000.
• [97] S.D. Kim, Y.T. Park, Application of TRIZ to Inventory Management, Asian Journal on Quality, vol.3 n.1, 2002, pp.91 - 97.
• [98] C.T. Su, C.S. Lin, A case study on the application of Fuzzy QFD in TRIZ for service quality improvement, Quality &. Quantity, vol.42 n.5, 2008, pp.563–578.
• [99] M.K. Low, T. Lamvik, K. Walsh, O. Myklebust, Manufacturing a Green Service: Engaging the TRIZ Model of Innovation, IEEE Transactions on electronics packaging manufacturing, vol.24 n.1, 2001, pp.10-17.