PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Dynamic motions of the cabin mounted on the mono-hull planing boat using suspension system in waves

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The necessity for higher speed and appropriate seakeeping performance of boats has led to extensive research. Hence, this research mainly discusses the optimal behavior of the boat against motions. From an economic point of view, reducing motions of the boat minimizes the damage caused by shock and vibration to the boat and equipment. Other benefits include comfort and safety and, as a result, improved human operating ability. Suspension systems are rarely used as motion controller in a boat. In multi-hull boats, the hull is an inseparable part of the vessels, so the wave will affect crew and equipment. This paper proposes and evaluates a novel concept boat equipped with a suspended cabin. The hull and superstructure (cabin) are separated in this new form by a simple passive suspension system. This study used numerical analysis to examine the seakeeping performance of the planing boat Fridsma model equipped with a passive suspension system under regular wave conditions. The hydrodynamics of the planing hull were modeled using commercial software, STAR-CCM+. For simulation of the passive suspension system between boat and cabin, MATLAB software was used. Results showed that the motion of the cabin, which is where the crew and equipment are located, decreased in regular waves.
Rocznik
Tom
Strony
13--25
Opis fizyczny
Bibliogr. 23 poz., rys, tab.
Twórcy
  • Department of Maritime Engineering, Amirkabir University of Technology, Hafez, 123123 Tehran, Iran
  • Department of Maritime Engineering, Amirkabir University of Technology, Hafez, 123123 Tehran, Iran
Bibliografia
  • 1. J. Han, D. Kitazawa, T. Kinoshita, T. Maeda, and H. Itakura, ‘Experimental investigation on a cabin-suspended catamaran in terms of motion reduction and wave energy harvesting by means of a semi-active motion control system’, Appl. Ocean Res., vol. 83, no. February 2018, pp. 88–102, 2019, doi: 10.1016/j.apor.2018.12.003.
  • 2. Takahashi, T., Arinaga, S., Ishii, T. Investigation into the technical feasibility of a hi-stable cabin craft (1986) Trans. West-Jpn. Soc. Naval Arch., 72, pp. 213-226.’
  • 3. Kihara, K., Hamada, C., Ohnaka, S., Kitamura, T. Development of a 200 passenger hi-stable cabin craft (1991) Trans. West-Jpn. Soc. Naval Arch., 81, pp. 57-69.’
  • 4. A. Kükner and K. Sariöz, ‘High speed hull form optimisation for seakeeping’, Adv. Eng. Softw., vol. 22, no. 3, pp. 179–189, 1995, doi: 10.1016/0965-9978(95)00016-P.
  • 5. S. M. Cook, P. Couser, and K. Klaka, ‘Investigation into wave loads and catamarans’, hydrodyn. High Speed Cr., no. November, pp. 24–25, 1999.
  • 6. “Chenliang Lu, 2010, ‘A comfortable boat with suspensions absorbing wave power’, Master Thesis, Department of Systems Innovation, School of Engineering, the University of Tokyo.”
  • 7. “Tsukamoto, Daisuke; ‘Basic research on a wave Energy absorbing and motion-controlled ship’, the University of Tokyo. In Japanese, 2012.”
  • 8. V. Marine, http:// www.velodynemarine.com/ (2012). URL http:// www.velodynemarine.com/.
  • 9. N.-C. P. Ltd, http:// www.nauti-craft.com/ (2014). URL http:// www.nauti-craft. com/.
  • 10. Marine Advanced Robotics,https://www.wam-v.com(2005- 2021)/.URL https://www.wam-v.com/’.
  • 11. J. F. and K. von E. Manhar R. Dhanak, P. Ananthakrishnan, ‘Seakeeping characteristics of a wave-adaptive modular unmanned surface vehicle’, Int. Conf. Ocean. Offshore Arct. Eng.
  • 12. Han, Jialin; Maeda, Teruo; Kinoshita, Takeshi; Kitazawa, Daisuke; 2013a, “Towing test and analysis of an oscillation controlled small ship with wave energy converters”, World NAOE Forum 2013 &International Symposium on Marine and Offshore Renewable Energy.
  • 13. Han, Jialin; Maeda, Teruo; Kinoshita, Takeshi; Kitazawa, Daisuke; 2013b, “Research on a motion-controlled ship by harvesting wave energy– based on a semi-active control system”, the 6 th East Asia Workshop for Marine Environment and Energy, Qingdao, China.
  • 14. Han, Jialin; Maeda, Teruo; Kinoshita, Takeshi; Kitazawa, Daisuke; “Towing test and motion analysis of a motioncontrolled ship- based on an application of skyhook theory”, Proceedings of the 12th International Conference on the Stability of Ships and Ocea.
  • 15. “CD-Adapco., User guide STAR-CCM+ Version 13.0.6, 2017.”
  • 16. HIRT, C. & NICHOLS, B. 1981. Volume of fluid (VOF) method for the dynamics of free boundaries. J. Comput. Phys,, 39 201–225.
  • 17. O.M. Faltinsen, “Hydrodynamics of High-Speed Marine Vehicles, Ch. 9- Planing vessles”, Cambridge University Press, 2005.
  • 18. G. Fridsma, ‘A systematic study of the rough-water performance of planing boats’, Stevens Inst Of Tech Hoboken Nj Davidson Lab, 1969.
  • 19. ITTC. Practical Guidelines for Ship CFD Application. ITTC–Recommended Procedures and Guidelines, 2011b. ITTC.
  • 20. O. F. Sukas, O. K. Kinaci, F. Cakici, and M. K. Gokce, ‘Hydrodynamic assessment of planing hulls using overset grids’, Phys. Procedia, vol. 65, pp. 35–46, 2017, doi: 10.1016/j.apor.2017.03.015.
  • 21. H. Ghassemi, M. Kamarlouei, and S. Taj Golah Veysi, ‘A hydrodynamic methodology and cfd analysis for performance prediction of stepped planing hulls’, Polish Marit. Res, vol. 22, no. 2, pp. 23–31, 2015.
  • 22. A. Nadery and H. Ghassemi, ‘Numerical investigation of the hydrodynamic performance of the propeller behind the ship with and without WED’, Polish Marit. Res., vol. 27, no. 4, pp. 50–59, 2020, doi: 10.2478/pomr-2020-0065.
  • 23. I. B. Celik, U. Ghia, P. J. Roache, C. J. Freitas, H. Coleman, and P. E. Raad, ‘Procedure for estimation and reporting of uncertainty due to discretization in CFD applications’, J. Fluids Eng., vol. 130, no. 7, pp. 078001–078004, 2008, doi: 10.1115/1.2960953.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu „Społeczna odpowiedzialność nauki” - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-947325e6-1117-4534-9fc7-1dd71c94b55b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.