Properties of PVD coatings manufactured on X38CrMoV5-1 steel for plastic moulding applications

• Autorzy: Gołąbczak M. , Pawlak W. , Szymański W. , Jacquet P. , Fliti R.
• Języki publikacji: EN

Abstrakty

EN

In plastics moulding industry a lot of parts sustain in relative movement: ejectors, slides, dies, etc. Some seizing or micro-welding may appear, especially when lubrication is not used. In this paper, PVD coatings have been obtained thanks to hybrid Cathodic Arc Evaporation system. Several properties of the coatings have been investigated such as chemical composition, microstructure, friction coefficient at ambient and high temperature conditions, nanohardness and their modulus of elasticity.

Słowa kluczowe

EN

X38CrMoV5-1 steel; PVD technology; TiC+a-C:H coating; MoS2TiW coating; friction coefficient; nanohardness

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2012
• Tom: Vol. 12, No. 2
• Strony: 37--45
• Opis fizyczny: Bibliogr. 8 poz., tab., rys.

Twórcy

autor

Gołąbczak M.

• Technical University of Lodz, 90-924 Lodz, Poland

autor

Pawlak W.

• Technical University of Lodz, 90-924 Lodz, Poland

autor

Szymański W.

• Technical University of Lodz, 90-924 Lodz, Poland

autor

Jacquet P.

• École Catholique d’Arts et Métiers, 69321 Lyon, France

autor

Fliti R.

• Centre Arts et Métiers, 71250 Cluny, France

Bibliografia

• [1] BIENK E. J., MIKKELSEN N.J., 1997, Application of advanced surface treatment technologies in the modern plastics moulding industry, Wear, 207, 6-9.
• [2] DEARNLEY P. A., 1999, Low friction surfaces for plastic moulding dies-an experimental case study, Wear, 225-229, 1109-1113.
• [3] HEINZE M., 1998, Wear resistance of hard coatings in plastic processing, Surface and Coating Technology, 105, 38-44.
• [4] MITTERER C., HOLLER F., REITENBERG D., BADISCH E., et al., 2003, Industrial applications of PACVD hard coatings, Surface and Coating Technology, 163-164, 716-722.
• [5] WENDLER B. G., 2011, Functional Coatings by PVD or CVD Methods, ITeE-PIB, Radom.
• [6] GOLABCZAK M., KONSTANTYNOWICZ A., 2010, Notices on method of thickness evaluation of the TiN layers on magnesium alloys, Defect and Diffusion Forum, 297-301, 641-649.
• [7] GOLABCZAK M., 2011, Characteristics of TiN and NCD layers deposited on magnesium alloys, Journal of Nano Research, 16, 29-35.
• [8] XIAODONG L., BHARAT B.,2002, A review of nanoindentation continuous stiffness measurements technique and its applications, Materials Characterization, 48, 11-36.