The Analysis of “Hot” Drawing Process of Trip Steel Wires at Different Initial Temperatures

• Autorzy: Wiewiórowska S. , Muskalski Z. , Siemiński M.

Identyfikatory

DOI

10.1515/amm-2016-0321

• Języki publikacji: EN

Abstrakty

EN

In the work the results of preliminary research of the „hot” drawing process of TRIP steel wires at different initial temperatures has been shown. The study is expected to find whether the „hot” drawing process, and so the increase in the temperature of the material being drawn, will block the transformation of retained austenite into martensite and, as a consequence, influence the properties of drawn wire.

Słowa kluczowe

EN

TRIP steel; hot drawing; wires

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 4
• Strony: 1991--1994
• Opis fizyczny: Bibliogr. 12 poz., rys., tab., wykr.

Twórcy

autor

Wiewiórowska S.

• Czestochowa University of Technology, Faculty of Production Enginering and Materials Technology, 19 Armii Krajowej Str., 42-200 Częstochowa, Poland

autor

Muskalski Z.

• Czestochowa University of Technology, Faculty of Production Enginering and Materials Technology, 19 Armii Krajowej Str., 42-200 Częstochowa, Poland

autor

Siemiński M.

• Metalurgia S.A., Świętej Rozalii 10/12, 97-500 Radomsko, Poland

Bibliografia

• [1] A. Grajcar, M. Opiela, S. Griner, The development of multiphase C-Mn-Si-Al-Nb-Ti steel structure in the increase the cold plastic deformation, Inżynieria Materiałowa 1, 55-61 (2011).
• [2] W. Dabboussi, High strain rate behaviour of multiphase transformation induced plasticity (TRIP) steel. PhD Thesis, McGill University Montreal, Canada (2009).
• [3] M. R. Berrahmoune, S. Berveiller, K. Inal, A. Moulin, E. Patoor, Analysis of the martensitic transformation at various scales in TRIP steel, Mater. Sci. Eng. A 378, 304-307 (2004).
• [4] R. Tian, L. Li, B.C. De Cooman, X. Wei, P. Sun, Effect of temperature and strain rate on dynamic properties of low silicon TRIP steel, J. Iron Steel Res. Int. 13(3), 51-56 (2006).
• [5] A. Grajcar, W. Kwaśny, W. Zalecki, Microstructure-property relationships in TRIP aided medium-C bainitic steel with lamellar retained austenite, Mater. Sci. Technol. 31(7), 781-794 (2015).
• [6] A. Grajcar, Microstructure evolution of advanced high-strength TRIP-aided bainitic steel, Mater. Tehnol. 49(5), 715-720 (2015).
• [7] J. Pietrzyk, W. Osuch, A. Kruk, G. Michta, Decomposition of austenite formed at the temperature range of A3-A1 in a 0.2C-1.5Mn-1.5Si steel during isothermal annealing, Inżynieria Materiałowa 3, 307-314 (1998).
• [8] B. C. De Cooman, Structure properties relationship in TRIP steels containing carbide free bainite, Current Opinion in Solid State and Materials Science 8, 285–303 (2004).
• [9] I. Tamura, Deformation-induced martensite transformation and transformation-induced plasticity in steel, Metal Science 16, 245-253 (1982).
• [10] G. Michta, J. Pietrzyk, W. Osuch, The stability of retained austenite formed at low temperatures for low carbon steels with copper using the TRIP effect, Inżynieria Materiałowa 6, 339-342 (2003).
• [11] A. Perlade, O. Bouaziz, Q. Furnemont: A physically based model for TRIP-aided carbon steel behaviour, Materials Science and Engineering A356, 145-152 (2003).
• [12] S. Wiewiórowska, Z. Muskalski, The determination of two-stage heat treatment process parameters for wire rod made from medium carbon steel with TRIP effect, Hutnik – Wiadomości Hutnicze, 9, 520-522 (2010).