PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Effect Of Low-Temperature Annealing On The Properties Of Ni-P Amorphous Alloys Deposited Via Electroless Plating

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Wpływ oceny mikrostruktury na odporność korozyjną wyżarzonego stopu amorficznego Ni-P
Języki publikacji
EN
Abstrakty
EN
Amorphous Ni-P alloys were prepared via electroless plating and annealing at 200°C at different times to obtain different microstructures. The effects of low-temperature annealing on the properties of amorphous Ni-P alloys were studied. The local atomic structure of the annealed amorphous Ni-P alloys was analyzed by calculating the atomic pair distribution function from their X-ray diffraction patterns. The results indicate that the properties of the annealed amorphous Ni-P alloys are closely related to the order atomic cluster size. However, these annealed Ni-P alloys maintained their amorphous structure at different annealing times. The variation in microhardness is in agreement with the change in cluster size. By contrast, the corrosion resistance of the annealed alloys in 3.5 wt% NaCl solution increases with the decrease in order cluster size.
PL
Amorficzne stopy Ni-P otrzymane metodą powlekania bezprądowego wyżarzano w temperaturze 200°C w różnych czasach, w celu otrzymania zróżnicowanej mikrostruktur. Badano wpływ mikrostruktury wyżarzanych stopów amorficznych Ni-P na ich odporność korozyjną w roztworze 3,5% wag. NaCl. Wyniki wskazują, że wielkość klastra w wyżarzanych stopach amorficznych Ni-P najpierw zmniejszyła się, a następnie zwiększyła wraz z czasem wyżarzania. Odporność badanych stopów na korozję jest ściśle związana z wielkością klastra, mimo, że stopy te po wyżarzaniu w różnych czasach zachowują strukturę amorficzną. Odporność wyżarzanych stopów amorficznych Ni-P w roztworze 3,5% wag. NaCl zwiększa się wraz ze zmniejszeniem się klastra.
Twórcy
autor
  • Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061, Shandong, China
autor
  • Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061, Shandong, China
autor
  • Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061, Shandong, China
autor
  • Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061, Shandong, China
Bibliografia
  • [1] R.L. Zeller, III, Corrosion 47, 692 (1991).
  • [2] L. Hao, M.-h. Mu, T. Yi, R. Li, Z.-l. Chen, A. Lin, F.-x. Gan, Corros. Sci. Prot. Technol. 20, 381 (2008).
  • [3] J. Miskuf, K. Csach, V. Ocelik, E.D. Tabachnikova, V.Z. Bengus, P.S. Popel, V.E. Sidorov, Czech. J. Phys. 54, D133 (2004).
  • [4] A. Krolikowski, B. Karbownicka, O. Jaklewicz, Electrochimica Acta 51, 6120 (2006).
  • [5] Y. Gao, Z.J. Zheng, M.Q. Zeng, C.P. Luo, M. Zhu, J. Mater. Res. 23, 1343 (2008).
  • [6] B. Allen, C. Po-Yao, H. Chi-Chang, Mater. Chem. Phys. 82, 93 (2003).
  • [7] C. YanHai, Z. Yong, C. Lin, L. Wen, Mater. Lett. 62, 4283 (2008).
  • [8] Y.H. Cheng, Y. Zou, L. Cheng, W. Liu, Mater. Sci. Technol. 24, 457 (2008).
  • [9] R. Taheri, I.N.A. Oguocha, S. Yannacopoulos, Mater. Sci. Technol. 17, 278 (2001).
  • [10] Y.D. He, H.F. Fu, X.G. Li, W. Gao, Scr. Mater. 58, 504 (2008).
  • [11] L.-K. Yang, Y.-F. Jiang, F.-Z. Yang, D.-Y. Wu, Z.-Q. Tian, Surf. Coat. Technol. 235, 277 (2013).
  • [12] T. Rabizadeh, S.R. Allahkaram, A. Zarebidaki, Mater. Des. 31, 3174 (2010).
  • [13] H.-C. Huang, S.-T. Chung, S.-J. Pan, W.-T. Tsai, C.-S. Lin, Surf. Coat. Technol. 205, 2097 (2010).
  • [14] C. Leon, E. Garcia-Ochoa, J. Garcia-Guerra, J. Gonzalez-Sanchez, Surf. Coat. Technol. 205, 2425 (2010).
  • [15] M. Crobu, A. Scorciapino, B. Elsener, A. Rossi, Electrochimica Acta 53, 3364 (2008).
  • [16] M. Nabiaek, P. Pietrusiewicz, M. Szota, A. Dobrzanska-Danikiewicz, S. Lesz, M. Dospia, K. Boch, K. Ozga, Archives of Metallurgy and Materials 59, 259 (2014).
  • [17] P. Pietrusiewicz, M. Nabiaek, M. Szota, M. Dospia, K. Boch, J. Gondro, K. Gruszka, Archives of Metallurgy and Materials 59, 663 (2014).
  • [18] S. Pietrzyk, P. Palimaka, W. Gebarowski, Archives of Metallurgy and Materials 59, 545 (2014).
  • [19] B. Bozzini, P.L. Cavallotti, Scr. Mater. 36, 1245 (1997).
  • [20] Y. Liu, D. Beckett, D. Hawthorne, Appl. Surf. Sci. 257, 4486 (2011).
  • [21] J.N. Balaraju, T.S.N.S. Narayanan, S.K. Seshadri, Mater. Res. Bull. 41, 847 (2006).
  • [22] H. Ashassi-Sorkhabi, S.H. Rafizadeh, Surf. Coat. Technol. 176, 318 (2004).
  • [23] T. Mimani, S.M. Mayanna, Surf. Coat. Technol. 79, 246 (1996).
  • [24] Y. Gao, Z.J. Zheng, M. Zhu, C.P. Luo, Mater. Sci. Eng. A, Struct. Mater., Prop. Microstruct. Process. A381, 98 (2004).
  • [25] K.G. Keong, W. Sha, S. Malinov, J. Alloys Compd. 334, 192 (2002).
  • [26] M. Saitou, Y. Okudaira, W. Oshikawa, J. Electrochem. Soc. 150, C140 (2003).
Uwagi
EN
This project is supported by National Natural Science Foundation of China (No. 51271099).
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-931636dd-ec8c-4d53-acfa-d1b0ddd7058f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.